EN 4675-2011 en Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0 4Fe) - Rm 1 300 MPa - Bars - De 110 mm《航空航天系列 钛Ti-P63002 (Ti5Al5Mo5V3Cr0 4Fe) R 1300 MPa 巴 D 110 mm》.pdf

1、BSI Standards PublicationBS EN 4675:2011Aerospace series Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) Rm 1 300 MPa Bars De 110 mmIncorporating corrigendum October 2015BS EN 4675:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4675:2011. The UK participation in i

2、ts preparation was entrusted by TechnicalA list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.ISBN 978 0 580 9194

3、5 9 ICS 49.025.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e d The B

4、ritish Standards Institution 2015. Published by BSI StandardsLimited 201531 October 2015 Implementation of CEN Correction Notice 27 July 2011: The scope has been modified to read 110 mmPurposes.to Subcommittee ACE/61/-/49, Titanium and its Alloys for Aerospace Committee ACE/61, Metallic materials fo

5、r aerospace purposes, EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4675 June 2011 ICS 49.025.30 English Version Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) -Rm 1 300 MPa - Bars - De 110 mm Srie arospatiale - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm 1 300 MPa - Barres - De

6、110 mm Luft- und Raumfahrt - Titan Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm 1 300 MPa - Stangen - De 110 mm This European Standard was approved by CEN on 9 October 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stand

7、ard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English

8、, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bul

9、garia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FO

10、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4675:2011: EEN 4675:2011 (E) 2 Contents Page

11、Foreword 3 Introduction . 4 1 Scope 5 2 Normative references 5 BS EN 4675:2011EN 4675:2011 (E) 3 Foreword This document (EN 4675:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance wit

12、h the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an ident

13、ical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be hel

14、d responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia

15、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 4675:2011EN 4675:2011 (E) 4 Introduction This European Standard is

16、part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-4. BS EN 4675:2011EN 4675:2011 (E) 5 1 Scope This European Standard specifies the requirements

17、relating to: Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) Rm 1 300 MPa Bars De 110 mm for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

18、 the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use EN 4500-4, Aerospace series Metallic materials Rules for drafting and presentation

19、 of material standards Part 4: Specific rules for titanium and titanium alloys 1)EN 4800-002, Aerospace series Titanium and titanium alloys Technical specification Part 002: Bar and section 1)1) Published as ASD-STAN Prestandard at the date of publication of this standard. BS EN 4675:2011EN 4675:201

20、1 (E) 6 1 Material designation Ti-P63002 (Ti5Al5Mo5V3Cr0,4Fe) 2 Chemical composition % Element Al Mo V Cr Fe O C N Y Other Ti Each Total min. 4,40 4,00 4,00 2,50 0,30 Base max. 5,70 5,50 5,50 3,50 0,50 0,18 0,10 0,05 0,005 0,10 0,30 3 Method of melting Vacuum melted. Final melting by consumable elec

21、trode. 4.1 Form Bars 4.2 Method of production Hot rolled. 4.3 Limit dimension(s) mm De 110 5 Technical specification EN 4800-002 6.1 Delivery condition Non heat treated. Heat treatment 6.2 Delivery condition code F 7 Use condition Solution treated and precipitation aged. Heat treatment 15 C to 40 C

22、below beta-transus/ t = 1 h / AC or inert gas + 540 C 650 C / t 8 h / AC Characteristics 8.1 Test sample(s) See EN 4800-002. 8.2 Test piece(s) See EN 4800-002. 8.3 Heat treatment Solution treated and aged. 9 Dimensions concerned mm D 75 75 D 110 10 Thickness of cladding on each face % 11 Direction o

23、f test piece L L T a12 T Temperature C Ambient 13 Proof stress Rp0,2 MPa 1 200 1 200 1 200 14 Strength Rm MPa 1 300 1 300 1 300 15 Elongation A % 6 6 4 16 Reduction of area Z % 10 10 8 17 Hardness 18 Shear strength Rc MPa 19 Bending k 20 Impact strength 21 C Temperature C 22 Time h 23 Stress a MPa 2

24、4 Elongation a % 25 Rupture stress R MPa 26 Elongation at rupture A % 27 Notes (see line 98) aBS EN 4675:2011EN 4675:2011 (E) 7 30 Microstructure -See EN 4800-002. 4 From locations representing the top and the bottom end of each batch. 5 15 C to 40 C below the beta-transus / t = 1 h / AC or inert ga

25、s + 540 C 650 C / t 4 h / AC 7 Shall consist of primary alpha phase in a matrix of aged beta phase. Continuous alpha phase network along prior beta phase grain boundaries is not acceptable. 44 External defects See EN 4800-002. 51 Macrostructure See EN 4800-002. 4 From location representing the top a

26、nd the bottom end of each batch. 5 Delivery condition Beta transus 20 C / 1 h / WQ or AC 7 D 50 mm: 2 MA2 50 mm D 110 mm: 2 MA3 No beta fleck (No range without primary alphaphase greater than 0,76 mm 0,76 mm). 61 Internal defects See EN 4800-002. 7 Class 5 86 -transus temperature See EN 4800-002. 95

27、 Marking inspection See EN 4800-002. 96 Dimensional inspection See EN 4800-002. 98 Notes aTest sample over 55 mm thickness. 99 Typical use BS EN 4675:2011EN 4675:2011 (E) 8 100 Product qualification See EN 4800-002. Qualification programme to be agreed between manufacturer and purchaser. BS EN 4675:

28、2011This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limit

29、ed.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our

30、 standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization n

31、eeds to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our w

32、ebsite at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier f

33、or you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can ke

34、ep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest

35、 hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many

36、users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and serv

37、ices to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighte

38、d by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may

39、 be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW