EN 4700-007-2010 en Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007 Remelting stock《航空航天系列 钢和耐热合金 锻造产品 技术规范 第007部分 再熔轧件》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4700-007:2010Aerospace series Steel and heat resisting alloys Wrought products T e c h n i c a l s p e c i f i c a t i o nPart 007: Remelting stockBS EN 4700-007:2010 BRITI

2、SH STANDARDNational forewordThis British Standard is the UK implementation of EN 4700-007:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/48, Heat Resisting Alloys for AerospacePurposes.A list of organizations represented on this committee can beobtained on

3、request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 55077 5ICS 49.025.10; 49.025.99Compliance with a British Standard cannot confer immunity fromlegal obligations.Thi

4、s British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2010.Amendments issued since publicationDate Text affectedBS EN 4700-007:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4700-007 October 2010 ICS 49.025.10 English Version Aero

5、space series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock Srie arospatiale - Aciers et alliages rsistant chaud - Produits corroys - Spcification technique - Partie 007 : Produits pour refusion Luft- und Raumfahrt - Stahl und Hochwarmfeste

6、n Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 007: Vormaterial This European Standard was approved by CEN on 9 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s

7、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German)

8、. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, C

9、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT E

10、UROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4700-007:2010: EBS EN 4700-007:2010EN 4700-007:2010 (E) 2 Contents Pag

11、e Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .64 Wording of order 75 Health and safety .76 Technical requirements 7BS EN 4700-007:2010EN 4700-007:2010 (E) 3 Foreword This document (EN 4700-007:2010) has been prepared by the Aerospace and Defence Industries Asso

12、ciation of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. Thi

13、s European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the e

14、lements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this

15、 European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

16、and the United Kingdom. BS EN 4700-007:2010EN 4700-007:2010 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. BS EN 4700-007:2010EN 4700-007:2010 (E) 5 1 Scope This sta

17、ndard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy remelting stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection sched

18、ule. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2002-001, Aerospac

19、e series Metallic materials Test methods Part 001: Tensile testing at ambient temperature EN 2002-002, Aerospace series Metallic materials Test methods Part 002: Tensile testing at elevated temperature EN 2002-005, Aerospace series Test methods for metallic materials Part 005: Uninterrupted creep an

20、d stress-rupture testing EN 2032-1, Aerospace series Metallic materials Part 1: Conventional designation EN 2032-2, Aerospace series Metallic materials Part 2: Coding of metallurgical condition in delivery condition EN 2078, Aerospace series Metallic materials Manufacturing schedule, inspection sche

21、dule, inspection and test report Definition, general principles, preparation and approval EN 2950, Aerospace series Test method Wrought heat resisting alloys Semi-finished products and parts Conditions for macrographic and micrographic examination Atlas of structures and defects EN 2951, Aerospace s

22、eries Metallic materials Test method Micrographic determination of content of non-metallic inclusions 1)EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use EN 4259, Aerospace series Metallic materials Definition of ge

23、neral terms 1)EN 9100, Quality Management Systems Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts EN 10027-1, Designation systems for steels Part 1: Steel names EN 10079, Definition o

24、f steel products EN ISO 642, Steel Hardenability test by end quenching (Jominy test) (ISO 642:1999) 1) Published as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN) (www.asd-stan.org). BS EN 4700-007

25、:2010EN 4700-007:2010 (E) 6 EN ISO 3651-1, Determination of resistance to intergranular corrosion of stainless steels Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998) EN ISO 3651-2,

26、Determination of resistance to intergranular corrosion of stainless steels Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels Corrosion test in media containing sulfuric acid (ISO 3651-2:1998) EN ISO 6506-1, Metallic materials Brinell hardness test Part 1: Test method (IS

27、O 6506-1:2005) EN ISO 6507-1, Metallic materials Vickers hardness test Part 1: Test method (ISO 6507-1:2005) EN ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005) EN ISO 6892-1, Metallic materials Tensile testing Part

28、1: Method of test at room temperature (ISO 6892-1:2009) prEN ISO 6892-2, Metallic materials Tensile testing Part 2: Method of test at elevated temperature (ISO/DIS 6892-2:2009) AMS 2315, Determination of Delta Ferrite Content 2)AMS 2750, Pyrometry 2)ASTM A604, Standard Practice for Macroetch Testing

29、 of Consumable Electrode Remelted Steel Bars and Billets 3)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4259 apply. For definitions specific to steel, see EN 10079. 3.1 melt mass of homogeneous liquid metal, the product of one or more furnaces mixe

30、d in the same furnace or ladle before pouring 3.2 cast solid metal resulting from the pouring of a single melt 3.3 parent cast cast of remelting stock to be used for the production of casting 3.4 approved scrap scrap used for the production of remelting stock NOTE 1 It arises from the manufacturers

31、own production or from that of the purchaser. Scrap used for the production of castings should be restricted to runners and risers, rejected castings and heavy fettling scrap but should exclude machining chips, turnings or small particles, except those from the manufacturers own production. 2) Publi

32、shed by: SAE National (US) Society of Automotive Engineers http:/www.sae.org/. 3) Published by: ASTM National (US) American Society for Testing and Materials http:/www.astm.org/. BS EN 4700-007:2010EN 4700-007:2010 (E) 7 NOTE 2 Scrap should be subject of preparation and evaluation by approved proced

33、ures and facilities which should include verification of chemical composition, freedom from contamination and the absence of foreign material. 3.5 product in this standard, remelting stock 3.6 remelting stock metal supplied in cast, granules or wrought form, the composition of which has been establi

34、shed by chemical analysis 3.7 batch batch of remelting stock consists of material of the same nominal dimensions and from the same melt 4 Wording of order The order shall clearly indicate: quantities to be supplied; dates of delivery; material standard number; delivery condition and metallurgical co

35、de of products; dimensions and tolerances or reference to an appropriate dimensional standard; product designation, when required; forwarding address; nature and type of packing, if required; surface protection, if appropriate; definition and frequency of any special tests and their retest procedure

36、s, if required. 5 Health and safety Products in the delivery condition shall fulfil the health and safety laws of the area of the country when and where it is to be delivered. A product safety data sheet shall be available. 6 Technical requirements 6.1 General The product shall be manufactured in ac

37、cordance with the requirements of the relevant material standard and the applicable requirements of this specification. A manufacturing schedule shall be established and applied in accordance with EN 2078. BS EN 4700-007:2010EN 4700-007:2010 (E) 8 Product shall satisfy the requirements of the materi

38、al standard and/or order and shall be free from irregularities prejudicial to the subsequent manufacture or use of this product. Notwithstanding previous acceptance complying with this material standard, any product that is found, at a later stage, to contain such defects shall be rejected. Unless o

39、therwise specified, the requirements in Tables 1 and 2 shall apply in conjunction with those of the relevant material standard. Table 1 relates to lines 1 to 29 (inclusive) of the material standard and Table 2 relates to lines 30 onwards in which the subline format is also used. Lines 2 to 98 may al

40、so be opened in line 100 if the material standard details specific qualification requirements. If a specific line number is not shown in Tables 1 and 2, the requirement is stated in the material standard and/or order. The requirements of the order and/or material standard shall over-ride the require

41、ments of the technical specification. 6.2 Qualification requirements Qualification requirements when invoked by the material standard and/or order are detailed in Tables 1 and 2. Unless otherwise agreed between the manufacturer and purchaser the qualification phase shall be run on the first three ba

42、tches, coming from at least two casts. 6.3 Release requirements 6.3.1 Release tests Release testing shall be the responsibility of the manufacturer. The purchaser reserves the right to perform any of the inspections and/or tests required by the material standard and/or order. The test samples shall

43、be representative of the product. When required on the order, the manufacturer shall inform the purchaser of the planned dates for extraction of samples and release testing in order that these operations may be witnessed. Tables 1 and 2 detail the requirements for each line of the material standard.

44、 Unless otherwise specifically requested by the purchaser, a particular inspection and/or test for release shall be carried out if corresponding acceptance criteria and/or values are stated in the applicable material standard, but see also 6.3.5. 6.3.2 Retests If any requirement is not met, retests

45、shall be carried out under the following conditions unless otherwise stated in the material standard or order. If the test procedure or test piece preparation is faulty, testing shall be re-applied at the original frequency after rectification of the original cause of failure, on a test sample locat

46、ed near the first one. When failure cannot be attributed to faulty testing, or test piece preparation, further test samples shall be selected at twice the original frequency from the product, one of which shall be that on which the original results were obtained unless already withdrawn by the manuf

47、acturer after suitable identification of the cause of failure. If all retest results are satisfactory, the batch shall be accepted. If one or more tests are unsatisfactory, the batch shall be: rejected; or 100 % retested and the conforming products accepted; or BS EN 4700-007:2010EN 4700-007:2010 (E

48、) 9 partially or fully re-heat treated if heat treatment can rectify the cause of the failure and tested as a completely new batch except for chemical composition and cleanness inspection. The reheat treatment shall be stated on the release test certificate. For cleanness inspection, if the material

49、 fails the requirement the product may be cut back before retesting. 6.3.3 Rejection Any failure to meet the requirements of the material standard shall be cause for rejection. 6.3.4 Special tests Special tests may be required by the purchaser. In such cases, the nature of the test, method, frequency and technical requirements shall be specified on the order or inspection schedule and shall be mutually agreed by the man