EN 4830-003-2015 en Aerospace series - Connectors optical rectangular modular operating temperature 125 for EN 4639-10X contacts - Part 003 Module - Product standard《航空航天系列 EN4639-.pdf

1、BSI Standards PublicationBS EN 4830-003:2015Aerospace series Connectors, optical,r e c t a n g u l a r , m o d u l a r , o p e r a t i n gtemperature 125 C, for EN4639-10X contactsPart 003: Module Product standardBS EN 4830-003:2015 BRITISH STANDARDNational forewordThis British Standard is the UK im

2、plementation of EN 4830-003:2015.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purpor

3、t to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 90481 3ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This

4、 British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4830-003:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4830-003 December 2015 ICS 49.060 En

5、glish Version Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts - Part 003: Module - Product standard Srie arospatiale - Connecteurs optiques rectangulaires, modulaires, temprature dutilisation 125 C, pour contacts EN 4639-10X - Parti

6、e 003: Module - Norme produit Luft- und Raumfahrt - Optischer Rechtecksteckverbinder, modular, Betriebstemperatur 125 C, fr EN 4639-10X-Kontakte - Teil 003: Module - Produktnorm This European Standard was approved by CEN on 22 August 2015. CEN members are bound to comply with the CEN/CENELEC Interna

7、l Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CE

8、N member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versi

9、ons. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P

10、oland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitatio

11、n in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4830-003:2015 EBS EN 4830-003:2015EN 4830-003:2015 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Designation . 9 6 Marking .

12、 9 7 Technical specification . 9 BS EN 4830-003:2015EN 4830-003:2015 (E) 3 European foreword This document (EN 4830-003:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rul

13、es of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an ident

14、ical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respon

15、sible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finlan

16、d, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4830-003:2015EN 4830-003:201

17、5 (E) 4 1 Scope This European Standard specifies the characteristics of module for EN 4639-10X optical termini, in the family of rectangular, modular, connector EN 4165. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispens

18、able for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-003, Aerospace series Connectors, electrical, rect

19、angular, modular Operating temperature 175 C continuous Part 003: Modules series 2 and series 3 Product standard EN 4830-001, Aerospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 001: Technical specification EN 4830-002, Aerospace ser

20、ies Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 002: Specification of performance EN 4830-004, Aerospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 004: Extraction tool Product

21、 standard TR 4684, Aerospace series Electrical and optical technology and component definitions 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in TR 4684 apply. 4 Required characteristics 4.1 Dimensions and masses See Figures 1 to 4. 4.2 Male module inte

22、rface dimensions Series 2 and 3 See Figure 1. 1) In preparation at the date of publication of this European Standard. BS EN 4830-003:2015EN 4830-003:2015 (E) 5 Dimensions and tolerances are in millimetres Key 1 Guiding pin 2 Coding location (see EN 4165-003) 3 Optional design for sealed version 4 Ce

23、nter coupling screw/device as per -001 5 Termini orientation key 6 Interfacial seal NOTE 1 Mass: 5,10 g max. NOTE 2 Others dimensions, see EN 4165-003. Figure 1 BS EN 4830-003:2015EN 4830-003:2015 (E) 6 4.3 Female module interface dimensions Series 2 See Figure 2. Dimensions and tolerances are in mi

24、llimetres Key 1 Guiding pin 2 Coding location (see EN 4165-003) 3 Optional design for sealed version 4 Center coupling screw/device as per -001 5 Termini orientation key 6 Interfacial seal 7 Sleeve holder NOTE1 Mass: 7,50 g max. NOTE 2 Others dimensions, see EN 4165-003. Figure 2 BS EN 4830-003:2015

25、EN 4830-003:2015 (E) 7 4.4 Female module interface dimensions Series 3 See Figure 3. Dimensions and tolerances are in millimetres Key 1 Guiding pin 2 Coding location (see EN 4165-003) 3 Optional design for sealed version 4 Centring fixing 5 Termini orientation key 6 Interfacial seal 7 Sleeve holder

26、NOTE 1 Mass: 9,00 g max. NOTE 2 Others dimensions, see EN 4165-003. Figure 3 BS EN 4830-003:2015EN 4830-003:2015 (E) 8 4.5 Sleeve holder See Figure 4. Dimensions and tolerances are in millimetres Key 1 Alignment sleeve 2 6 cavities 3 3 mm hex. Captive screw 4 Module limit stop 5 Floating movement NO

27、TE Mass: 1,6 g max. Figure 4 4.6 Material and surface treatment See EN 4830-002. 4.7 Optical, mechanical and climatic characteristics See EN 4830-001. 4.8 Tool See EN 4830-004. BS EN 4830-003:2015EN 4830-003:2015 (E) 9 5 Designation EXAMPLE Description block OPTICAL MODULES Identification block EN48

28、30 A 06EL X X X Number of the basic standard Module series Series 2 = A Series 3 = B Module arrangement 06 = 6 cavities EL = termini according EN 4639-10X Peripheral sealing Unsealed = 1 Sealed = 2 Polarization (see EN 4165-003) N = Normal, or A, B, C, D Modules type Male = P Female = S 6 Marking Th

29、e marking shall include the identification defined in Clause 5, the date of manufacture (year, week) and the name or trade mark of the manufacturer or conform to standard EN 2424, code P, if required. 7 Technical specification See EN 4830-001. This page deliberately left blankThis page deliberately

30、left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Instit

31、ution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been careful

32、ly assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out m

33、ore about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copie

34、s can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further informa

35、tion on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards

36、developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standard

37、s when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With upd

38、ates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your busine

39、ss. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or

40、 entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a

41、 retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW