1、BRITISH STANDARD BS EN 500-6:2006+A1:2008 Mobile roadconstructionmachinery Safety Part 6: Specific requirements for paver-finishersICS 93.080.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g3
2、7g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 500-6:2006+A1:2008. It supersedes BS EN 500-6:2006, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating
3、changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant and site safety, to Subcommittee B/513/1, Earth moving mach
4、inery (International). A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard
5、cannot confer immunity from legal obligations. BS EN 500-6:2006+A1:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2009Amendments/corrigenda issued since publicationComments Date 30 September 2009 Implementation of CE
6、N amendment A1:2008ISBN 978 0 580 62489 6EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 500-6:2006+A1 October 2008 ICS 93.080.10 Supersedes EN 500-6:2006 English Version Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers Machines mobiles pour la con
7、struction de routes - Scurit - Partie 6: Prescriptions spcifiques pour finisseurs Bewegliche Straenbaumaschinen - Sicherheit - Teil 6: Besondere Anforderungen an Straenfertiger This European Standard was approved by CEN on 17 August 2006 and includes Amendment 1 approved by CEN on 25 August 2008. CE
8、N members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on app
9、lication to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre
10、 has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
11、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by an
12、y means reserved worldwide for CEN national Members. Ref. No. EN 500-6:2006+A1:2008: E2 Contents Page Foreword4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 List of significant hazards 7 5 Safety requirements and/or protective measures7 5.1 Lighting, signalling and
13、 marking lights and reflex-reflector devices.7 5.2 Operation and handling 7 5.3 Operators station 7 5.4 Operators seat.7 5.5 Controls and indicators 7 5.6 Starting .7 5.7 Stopping .8 5.8 Access systems to operators station and to maintenance points 8 5.9 Protection .8 5.10 Pressurised systems.8 5.11
14、 Fire protection8 5.12 Hot surfaces .8 5.13 Signal devices and warning signs .8 5.14 Liquid gas units .8 5.15 Electrical and electronic systems9 5.16 Electro-magnetic compatibility (EMC).9 5.17 Noise and vibration9 5.18 Conveyors 9 6 Verification of safety requirements and/or protective measures .9
15、7 Information for the user 9 7.1 Warning signals and devices .9 7.2 Instruction handbook 9 7.3 Marking .9 Annex A (normative) Braking systems of rubber-tyred paver-finishers Performance requirements and test procedures 10 Annex B (normative) Noise test code for paver-finishers .12 Annex C (normative
16、) Noise test code for slipform pavers 17 Annex D (informative) Examples of paver-finishers 22 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EC Directive 98/37/EC 27 Annex ZB (informative) !Relationship between this European Standard and the Esse
17、ntial Requirements of EU Directive 2006/42/EC“.28 Bibliography 29 BS EN 500-6:2006+A1:2008EN 500-6:2006+A1:2008 (E)3 Figures Figure B.1 13 Figure B.2 13 Figure B.3 Microphone positions .13 Figure C.1 17 Figure C.2 17 Figure C.3 Microphone positions .18 Figure D.2 Crawler-mounted paver-finisher23 Fig
18、ure D.3 Pre-compaction screed.23 Figure D.4 Compaction screed with vibration 24 Figure D.5 Compaction screed with tamper bar .24 Figure D.6 High-compaction screed with tamper bar and vibration.25 Figure D.7 High-compaction screed with tamper bar, vibration and two pressure bars .25 Figure D.8 Slipfo
19、rm paver with offset mould 26 Figure D.9 Slipform paver with road mould 26 Tables Table 17 Table B.1 Settings for simulation to determine noise emission of a paver-finisher while paving15 Table C.1 Settings for simulation to determine noise emission of a slipform paver while paving.19 BS EN 500-6:20
20、06+A1:2008EN 500-6:2006+A1:2008 (E)4 Foreword This document (EN 500-6:2006+A1:2008) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a natio
21、nal standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-08-25. This document supersedes !EN 500-6:2006“.
22、The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relation
23、ship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ EN 500 ”Mobile road construction machinery Safety” comprises the following parts: Part 1: Common requirements; Part 2: Specific requirements for road-milling machines; Part 3: Specific requireme
24、nts for soil-stabilising machines and recycling machines; Part 4: Specific requirements for compaction machines; Part 6: Specific requirements for paver-finishers. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to impleme
25、nt this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland a
26、nd United Kingdom. BS EN 500-6:2006+A1:2008EN 500-6:2006+A1:2008 (E)5 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indi-cated in the scope of this Europea
27、n Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the pro-visions of this type C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of thi
28、s type C standard. BS EN 500-6:2006+A1:2008EN 500-6:2006+A1:2008 (E)6 1 Scope This part of EN 500 specifies the safety requirements for paver-finishers as defined in Clause 3 and deals with the significant hazards relevant to these machines, when they are used as intended and under conditions of mis
29、use which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 “Common requirements”. If internal and/or external vibrators are used for concrete paving, then prEN 12649 applies. 2 Normative references The following referenced documents are indispensable for t
30、he application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 500-1:2006, Mobile road construction machinery Safety Part 1: Common requirements. EN 953:1997, Safety o
31、f machinery Guards General requirements for the design and construction of fixed and movable guards. EN ISO 3450:1996, Earth-moving machinery Braking systems of rubber-tyred machines Systems and per-formance requirements and test procedures (ISO 3450:1996). EN ISO 3744:1995, Acoustics Determination
32、of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994). EN ISO 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other spec
33、ified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995). EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic termi-nology, methodology (ISO 12100-1:2003). 3 Terms and definitions For the purposes of thi
34、s document, the terms and definitions given in EN ISO 12100-1:2003 and the following ap-ply. 3.1 paver-finisher mobile self-propelled machine (either rubber-tyred or crawler-mounted) specifically designed to receive, convey, distribute, profile and compact paving material (see Figures D.1 and D.2) 3
35、.1.1 pre-compaction screed paver-finisher machine that compacts the construction material by the weight of the screed (pre-compacting system) (see Figure D.3) 3.1.2 compaction screed paver-finisher machine fitted with, in addition to the pre-compacting system, a single additional compaction system w
36、hich may consist of vibrators or tamper bars (see Figures D.4 and D.5) BS EN 500-6:2006+A1:2008EN 500-6:2006+A1:2008 (E)7 3.1.3 high-compaction screed paver-finisher machine fitted with, in addition to the pre-compacting system, at least two compaction systems which may consist of vibrators, tamper
37、bars or pressure bars (see Figures D.6 and D.7) 3.2 slipform paver machine on three or four crawlers intended to move and to guide a mould that extrudes pre-vibrated concrete to make either continuous works, such as borders, inserts, paving stones, or layers of continuous concrete (see Fig-ures D.8
38、and D.9) 4 List of significant hazards Annex F of EN 500-1:2006 applies with the following exception: Table 1 5 Hazards generated by vibration 5.1 Hand-arm vibrations 5 Safety requirements and/or protective measures 5.1 Lighting, signalling and marking lights and reflex-reflector devices 5.2 of EN 5
39、00-1:2006 applies. 5.2 Operation and handling 5.3 of EN 500-1:2006 applies. 5.3 Operators station 5.4 of EN 500-1:2006 applies with the following exception: 5.4.1 of EN 500-1:2006, fifth and sixth indent, applies only for forward measurement; 5.4.2 of EN 500-1:2006, first paragraph, does not apply f
40、or paver-finishers. 5.4 Operators seat 5.5 of EN 500-1:2006 applies. 5.5 Controls and indicators 5.6 of EN 500-1:2006 applies with the following addition: the extending or closing of the telescopic screed shall not be induced simultaneously from both the operators station and the remote control area
41、. Controls for the regulation of the telescopic screeds shall be designed in such a manner as to ensure that they return to neutral when released (hold-to-run control). 5.6 Starting 5.7 of EN 500-1:2006 applies. BS EN 500-6:2006+A1:2008EN 500-6:2006+A1:2008 (E)8 5.7 Stopping 5.8 of EN 500-1:2006 app
42、lies with the following addition: braking systems of rubber-tyred paver-finishers shall comply with Annex A. 5.8 Access systems to operators station and to maintenance points 5.9 of EN 500-1:2006 applies with the following exception and addition: the height of the first step (600 mm) for access to t
43、he operators position can be exceeded in transport position. 5.9 does not apply for access systems leading to service points in the area of the material hopper. Walkways shall be fitted to the screed sections and shall cover the operating width of the screed. 5.9 Protection 5.10 of EN 500-1:2006 app
44、lies with the following addition: screeds shall be provided with a locking device to ensure safe elevation. The spreader augers from which mechanical hazard emanates within the width of the basic machine shall be fitted with fixed guards according to 3.2 of EN 953:1997, e.g. by gratings. When the sp
45、reader augers extend beyond the width of the basic machine, they shall at least be protected by guard-rails. When paver-finishers are designed for use on rails, all wheels in each direction of travel shall be provided with foot-guards. The distance between the foot-guards and upper edge of the rail
46、shall not exceed 20 mm. 5.10 Pressurised systems 5.11 of EN 500-1:2006 applies. 5.11 Fire protection 5.12 of EN 500-1:2006 applies. 5.12 Hot surfaces 5.13 of EN 500-1:2006 applies. 5.13 Signal devices and warning signs 5.14 of EN 500-1:2006 applies with the following addition: telescopic screeds use
47、d on paver-finishers which could form crushing or shearing zones during their operation shall be fitted with yellow flashing lights. Those flashing lights shall be located close to the crushing or shearing zones and shall be activated automatically when the screeds are extended or retracted. 5.14 Li
48、quid gas units 5.15 of EN 500-1:2006 applies. BS EN 500-6:2006+A1:2008EN 500-6:2006+A1:2008 (E)9 5.15 Electrical and electronic systems 5.16 of EN 500-1:2006 applies. 5.16 Electro-magnetic compatibility (EMC) 5.17 of EN 500-1:2006 applies with the following addition: the antenna shall be located suc
49、cessively on the left- and right-hand sides of the paver-finisher, with the an-tenna parallel to the plane of the longitudinal symmetry of the paver-finisher and in line with the SIP. 5.17 Noise and vibration 5.18.2 and 5.18.3 of EN 500-1:2006 apply with the following addition: for the determination of the !noise emission values“, Annex B applies to paver-finishers and Annex C ap-plies to slipform pavers. 5.18 Conveyors Hopper conveyors need not to comply with 5.19 of EN 500-1:20
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1