EN 6090-2016 en Aerospace series - Washer retaining《航空航天系列-垫圈 保留》.pdf

1、BS EN 6090:2016Aerospace series Washer,retainingBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 6090:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 6090:2016.The UK participation in its preparation was entrusted to Te

2、chnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication

3、. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 92618 1ICS 49.030.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on

4、30 September 2016.Amendments issued since publicationDate Text affectedBS EN 6090:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6090 August 2016 ICS 49.030.50 English Version Aerospace series - Washer, retaining Srie arospatiale - Rondelle frein Luft- und Raumfahrt - Sicherungsscheibe Thi

5、s European Standard was approved by CEN on 11 March 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc

6、es concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN me

7、mber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

8、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES

9、 KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 6090:2016 EBS EN 6090:2016EN 6090:2016 (E) 2 Contents Page European foreword 3 1 Scope 4 2 No

10、rmative references 4 3 Requirements 4 4 Designation 8 5 Marking . 8 6 Technical specification 8 Bibliography . 9 BS EN 6090:2016EN 6090:2016 (E) 3 European foreword This document (EN 6090:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STA

11、N). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the statu

12、s of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2017, and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be the su

13、bject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,

14、Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

15、, Turkey and the United Kingdom. BS EN 6090:2016EN 6090:2016 (E) 4 1 Scope This European Standard specifies the dimensions, tolerances, required characteristics and mass of a retaining washer for use in fuselage interior equipment and structural applications. 2 Normative references The following doc

16、uments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace serie

17、s Marking of aerospace products EN 2516, Aerospace series Passivation of corrosion resistant steels and decontamination of nickel base alloys EN 6095, Aerospace series Rotary fasteners Structural and non-structural applications Technical specification1)EN 10151, Stainless steel strip for springs Tec

18、hnical delivery conditions ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications SAE AMS 2700, Passivation of corrosion resistant steels2)3 Requirements 3.1 Configuration, dimensions, tolerances and mass The configuration, dimens

19、ions, tolerances and mass shall conform with Figure 1 to 4 and Table 1. Dimensions and tolerances are expressed in millimeters. Tolerances not specified shall be in accordance with ISO 2768-1 (Tolerance class: ISO 2768-m). All dimensions and tolerances apply after surface treatment. All burrs to be

20、removed / sharp edges to be broken. 1)In preparation at the date of publication of this standard. 2)Published by: Society of Automotive Engineers (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA. BS EN 6090:2016EN 6090:2016 (E) 5 Table 1 Dimensions and mass Size code Type 1 2 d1 d2 d3 b

21、 t Mass (Ref.) kg/1 000pcs 01 A 30 15 5,70 +0,20 0 8,9 11,8 0 -0,2 0,60 0,25 0,13 10 B 6,20 0 -0,10 11 6,45 0,05 20 C 18 9 14,20 0 -0,10 16,0 19,0 0 -0,2 0,30 0,24 21 19,75 +0,05 0 21,8 23,8 0 -0,2 0,35 0,30 D 13 6,5 20,52 +0,05 0 22,2 1,5 0 -0,1 Figure 1 Configuration type A BS EN 6090:2016EN 6090:

22、2016 (E) 6 Figure 2 Configuration type B Figure 3 Configuration type C BS EN 6090:2016EN 6090:2016 (E) 7 Figure 4 Configuration type D 3.2 Material and surface treatment See Table 2. Table 2 Material and surface treatment Type code Material Surface treatment A Corrosion resistant steel 1.4310 + C150

23、0 + 2H per EN 10151 Passivated per AMS 2700 or EN2516 B C D 3.3 Operating temperature This washer shall be used in the temperature range of 55 C to 150 C. BS EN 6090:2016EN 6090:2016 (E) 8 4 Designation EXAMPLE NOTE If necessary, the code I9005 shall be placed between the description block and the i

24、dentity block. 5 Marking EN 2424, style G. 6 Technical specification EN 6095. BS EN 6090:2016EN 6090:2016 (E) 9 Bibliography 1 EN 6088, Aerospace series Stud1) 2 EN 6089, Aerospace series Washer, retaining, for usage with stud EN 60883)3 EN 6091, Aerospace series Circlip3)4 EN 6092, Aerospace series

25、 Receptacle, floating, double lug3) 5 EN 6093, Aerospace series Receptacle, floating, single lug3)6 EN 6094, Aerospace series Washer, spring, countersunk3)7 EN 6105, Aerospace series Stud with shoulder1)3)Published as ASD Prestandard at the date of publication of this standard. This page deliberatel

26、y left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standar

27、ds Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependab

28、le format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standard

29、s by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. I

30、f you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some p

31、erson or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to

32、 any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy fo

33、rmat is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal c

34、ompany use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of

35、the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subs

36、cription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 a

37、nd is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI

38、 Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publi

39、cations on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revisi

40、on. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enqui

41、ries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20