EN 6092-2016 en Aerospace series - Receptacle floating double lug《航空航天系列-插座 浮动 双耳》.pdf

1、BS EN 6092:2016Aerospace series Receptacle,floating, double lugBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 6092:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 6092:2016.The UK participation in its preparation was

2、entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its cor

3、rectapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 92619 8ICS 49.030.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strateg

4、y Committee on 30 September 2016.Amendments issued since publicationDate Text affectedBS EN 6092:20162“ EN 6092 trsx vrur ss trsx 22 “ o CEN-CENELECManagement Centre: Avenue Marnix 17, B-1000 Brussels 9trsx xrttrsxBS EN 6092:2016EN 6092:2016 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normat

5、ive references 4 3 Requirements 5 4 Designation 9 5 Marking . 9 6 Technical specification 9 7 Example of installation 9 BS EN 6092:2016EN 6092:2016 (E) 3 European foreword This document (EN 6092:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (

6、ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given th

7、e status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2017, and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be

8、 the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Be

9、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit

10、zerland, Turkey and the United Kingdom. BS EN 6092:2016EN 6092:2016 (E) 4 1 Scope This European Standard specifies the dimensions, tolerances, required characteristics and mass of a receptacle for use in fuselage interior equipment and structural applications. This standard shall be used in conjunct

11、ion with studs per EN 6088 or EN 6105. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the r

12、eferenced document (including any amendments) applies. DIN 17850, Titanium, chemical composition EN 2424, Aerospace series Marking of aerospace products EN 2516, Aerospace series Passivation of corrosion resistant steels and decontamination of nickel base alloys EN 2808, Aerospace series Anodizing o

13、f titanium and titanium alloys EN 6088, Aerospace series Stud1)EN 6089, Aerospace series Washer, retaining, for usage with stud EN 60881)EN 6090, Aerospace series Washer, retaining1)EN 6091, Aerospace series Circlip1)EN 6094, Aerospace series Washer, spring, countersunk1)EN 6095, Aerospace series Ro

14、tary fasteners Structural and non-structural applications Technical specification1)EN 6105, Aerospace series Stud with shoulder1)EN 10088-3, Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels

15、 for general purposes EN 10270-1, Steel wire for mechanical springs Part 1: Patented cold drawn unalloyed spring steel wire EN 10270-3, Steel wire for mechanical springs Part 3: Stainless spring steel wire ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without in

16、dividual tolerance indications ISO 8080, Aerospace Anodic treatment of titanium and titanium alloys Sulfuric acid process SAE AMS 2700, Passivation of corrosion resistant steels2)1)Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). 2)Published by: Socie

17、ty of Automotive Engineers (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA BS EN 6092:2016EN 6092:2016 (E) 5 SAE AMS 5528, Steel, corrosion resistant, sheet, strip and plate, 17Cr-7.1Ni-1.1Al, solution heat treated, precipitation hardenable2)SAE AS 8879, Screw threads UNJ profile, inch

18、 controlled radius root with increased minor diameter2)MIL-DTL-83488, Coating, aluminium, high purity3)MIL-PRF-46010, Lubricant, solid film, heat cured, corrosion inhibiting3)3 Requirements 3.1 Configuration, dimensions and tolerances The configuration, dimensions and tolerances shall conform with F

19、igure 1. Dimensions and tolerances are expressed in millimetres. Tolerances not specified shall be in accordance with ISO 2768-1 (Tolerance class: ISO 2768-m). All dimensions and tolerances apply after surface treatment. All burrs to be removed/sharp edges to be broken. 3)Published by: Department of

20、 Defense (DoD), the Pentagon, Washington, D.C., 20307, USA. BS EN 6092:2016EN 6092:2016 (E) 6 Key 1 Marking, see Clause 5 2 Plate Part A 3 Washers 4 Cap 5 Springs 6 Screw 7 Thread per AS 8879, 8-32UNC-3A, 2 lead Figure 1 Configuration, dimensions and tolerances Barrel Part B BS EN 6092:2016EN 6092:2

21、016 (E) 7 3.2 Material and surface treatment See Table 1. Table 1 Material and surface treatment Dash number Finish code Element Material Finish Lubricant 01 Screw Corrosion resistant steel 1.4303 per EN 10088-3 Passivated per AMS 2700 or EN 2516 Dry film per MIL-PRF-46010 a Cap Corrosion resistant

22、steel 1.4404 per EN 10088-3 bNone Plate Corrosion resistant steel per AMS 5528 Springs Corrosion resistant steel 1.4310 per EN 10270-1 or EN 10270-3 Washers Corrosion resistant steel per AMS 5528 Dry film per MIL-PRF-46010 01 V Screw Corrosion resistant steel 1.4303 per EN 10088-3 Dry film per MIL-P

23、RF-46010 a Cap Corrosion resistant steel 1.4404 per EN 10088-3 bIVD coating per MIL-DTL-83488 type II, class 3 None Plate Corrosion resistant steel per AMS 5528 Springs Corrosion resistant steel 1.4310 per EN 10270-1 or EN 10270-3 Washers Corrosion resistant steel per AMS 5528 Dry film per MIL-PRF-4

24、6010 02 S Screw Corrosion resistant steel 1.4303 per EN 10088-3 Passivated per AMS 2700 or EN 2516 Dry film per MIL-PRF-46010 a Cap Titanium alloy 3.7035 per DIN 17850 Anodized per EN 2808 or ISO 8080 None Plate Corrosion resistant steel per AMS 5528 Passivated per AMS 2700 or EN 2516 Springs Corros

25、ion resistant steel 1.4310 per EN 10270-1 or EN 10270-3 Washers Corrosion resistant steel per AMS 5528 Dry film per MIL-PRF-46010 aAt manufacturers discretion. bCarbon content of 0,3 % max. permitted after sintering process. BS EN 6092:2016EN 6092:2016 (E) 8 3.3 Mass See Table 2. Table 2 Mass Dash n

26、umber Finish code Mass (Ref.) kg/1 000 pieces 01 6,7 01 V 6,7 02 S 5,17 3.4 Floatability Minimum floatability: 0,64 mm radially from center 3.5 Static values Maximum axial tensile load: 6 000 N Locking torque: 2,8 Nm 3,2 Nm 3.6 Operating temperature This receptacle shall be used in the temperature r

27、ange of F 55 C to 150 C. 3.7 Procurement codes Receptacles may be procured as separate parts as shown in Table 3. The bags shall be identified with a label carrying the part designation. Table 3 Procurement codes for EN 6092 Procurement Code Part Quantity supplied per bag No. Code Plate and Barrel a

28、ssembly (Parts A and B on Figure 1) 50 A Plate (Part A on Figure 1) 50 B Barrel assembly (Part B on Figure 1) 50 BS EN 6092:2016EN 6092:2016 (E) 9 4 Designation EXAMPLE NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5 Marking EN 2424, style F.

29、 6 Technical specification EN 6095. 7 Example of installation Key 1 Washer per EN 6094 2 Receptacle per EN 6092 3 Stud per EN 6088 or EN 6105 NOTE Retaining washer EN 6090 or retaining washer EN 6089 and circlip EN 6091 respectively not shown. Refer to relevant standard for details of installation.

30、Figure 2 Example of installation This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other

31、 standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in ou

32、r standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization

33、needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our

34、website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standard

35、s, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfe

36、r, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft cop

37、y format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A singl

38、e paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extr