1、BRITISH STANDARDContinuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materialsICS 53.040.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g
2、60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Incorporating corrigenda Aprill 2003 and JJune 2009BS EN 6 :2002+A1:201020National forewordThis British Standard is the UK implementation of EN 620:2002+A1:2010. It supersedes BS EN 620:2002 which is withdrawn.The start and finish of text introduced or alter
3、ed by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee MHE/9, Continuous mechanical hand
4、ling equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer
5、 immunity from legal obligations.BS EN 620:2002+A1:2010This British Standard was published under the authority of the Standards Policy and Strategy Committee on 17 May 2002 BSI 2011Amendments/corrigenda issued since publicationAmd. No. Date Comments 14439 Corrigendum No. 13 April 2003 Correction of
6、shoulder headings and typographical error on page 630 June 2009 Addition of supersession details in National foreword31 March 2011 Implementation of CEN Amendment A1:2010ISBN 978 0 580 70645 5EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 620:2002+A1 December 2010 ICS 53.040.10 Supersedes EN 6
7、20:2002English Version Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials Equipements et systmes de manutention continue - Prescriptions de scurit et de CEM pour les transporteurs courroie fixes pour produits en vrac Stetigfrderer und
8、Systeme - Sicherheits- und EMW- Anforderungen fr ortsfeste Gurtfrderer fr Schttgutt This European Standard was approved by CEN on 16 november 2001 and includes Amendment 1 approved by CEN on 9 November 2010.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
9、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard
10、exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national
11、 standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland
12、 and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 620
13、:2002+A1:2010: EEN 620:2002+A1:2010 (E) 2 Contents page Foreword 3Introduction . 41 Scope 52 Normative references 63 Terms and definitions . 84 List of hazards 124.1 Mechanical hazards . 124.2 Electrical hazards 144.3 Thermal hazards 144.4 Hazards due to electromagnetic radiation 144.5 Fire or explo
14、sion hazards . 154.6 Hazards generated by neglected ergonomic principals in machine design . 154.7 Hazards arising from failure of energy supply and other functional disorders 154.8 Hazards arising during inspection, maintenance and cleaning . 155 Safety and EMC requirements and/or measures 165.1 Me
15、asures for protection against mechanical hazards . 165.2 Measures for protection against electrical hazards . 365.3 Measures for protection against thermal hazards . 375.4 Electromagnetic compatibility (EMC) 385.5 Measures for protection against fire and explosion hazards due to the materials convey
16、ed 395.6 Measures for protection against hazards generated by neglected ergonomic principles in machine design (mismatch of machinery with human characteristics and abilities) 395.7 Measures for protection against hazards caused by failure of energy supply, and other functional disorders 395.8 Measu
17、res for protection against hazards arising during inspection, maintenance and cleaning 426 Verification of safety and EMC requirements and/or measures . 437 Information for use 467.1 Instruction handbook 467.2 Marking . 49Annex A (normative) Fire or explosion hazard 50Annex ZA (informative) !Relatio
18、nship between this European Standard and the Essential Requirements of the EU Directive 2006/42/EC“ 52Annex ZB (informative) !Coverage of Essential Requirements of EU Directives“ 54Bibliography 55BS EN 620:2002+A1:2010EN 620:2002+A1:2010 (E) 3 Foreword This document (EN 620:2002+A1:2010) has been pr
19、epared by Technical Committee CEN /TC 148, “Continuous handling equipment and systems - Safety“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 201
20、1, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. T
21、his document includes Amendment 1, approved by CEN on 2010-11-09. This document supersedes EN 620:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and th
22、e European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This !standard“ forms part of a series of five !standards“ the titles of which are given b
23、elow: EN 617 “Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers“ ; EN 618 “Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk m
24、aterials except fixed belt conveyors” ; !EN 619“ ”Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads” ; EN 620 “Continuous handling equipment and systems Safety and EMC requirements for fixed belt con-veyors for bulk material” ;
25、EN 741 “Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials”. !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement t
26、his European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerla
27、nd and United Kingdom. BS EN 620:2002+A1:2010EN 620:2002+A1:2010 (E) 4 Introduction This European Standard is a type C Standard as stated in EN 1070:1998. The products concerned and the extent to which hazards are covered are indicated in the scope of this standard. While producing this standard it
28、was assumed that: negotiations occur between the manufacturer and the purchaser concerning particular conditions for the use and places of use for the machinery related to health and safety; only suitably trained persons will operate this machinery; the machinery will be kept in good repair and work
29、ing order, in accordance with the manufacturers instructions, to retain specified health and safety characteristics throughout its working life; the place of installation is adequately lit. the place of installation will allow safe use of the machinery; by design of the load bearing elements, the sa
30、fe operation of the system and components is assured for loading ranging from zero to 100 % of the rated capacities and during testing; all parts of the machinery without specific requirements, will be: a) made from materials of adequate strength and durability and of suitable quality for their inte
31、nded purpose; b) of sound mechanical construction; c) designed in accordance with the usual engineering practice and engineering codes, taking account of all failure modes and incorporating appropriate safety factors. EN 617, EN 618 and EN 741 need to be considered for a complete continuous handling
32、 system (machine). BS EN 620:2002+A1:2010EN 620:2002+A1:2010 (E) 5 1 Scope 1.1 This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in
33、3.1 to 3.2.4 and designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered. 1.2 This standard applies to use in ambient air temperatures of -15 C to + 40 C. 1.3 This standard does not
34、cover: a) use in open cast lignite mining or use underground, such as in mines or tunnels; b) use in public areas or for man-riding; c) floating, dredging and ship mounted equipment; d) conveyors requiring a high level of cleanliness for hygiene reasons, e.g. in direct contact with foodstuffs or pha
35、rmaceuticals; e) conveyors using a moving belt with other than a continuous rubber or polymeric surface for the conveying medium; f) transportation of the conveyor; g) the design of the supporting structure which is not part of a conveyor (see 3.2); h) the effects of wind; i) hazards resulting from
36、handling specific hazardous materials, (e.g. explosives, radiating material); j) hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes or dust; k) biological and micro-biological (viral or bacterial) hazards; l) hazards due to heat radiation from the materials hand
37、led; m) hazards caused by operation in electromagnetic fields outside the range of EN 61000-6-2:1999; n) hazards caused by operation subject to special regulations (e.g. explosive atmospheres); o) hazards caused by noise; p) hazards caused by the use of ionising radiation sources; q) hazards caused
38、by hydraulic equipment. The safety requirements of this standard apply to equipment and systems placed on the market after the date of publication of this standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applica
39、ble to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC. BS EN 620:2002+A1:2010EN 620:2002+A1:2010 (E) 6 2 Normative references The following r
40、eferenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 294:1992, Safety of machinery Safety distances
41、 to prevent danger zones being reached by the upper limbs EN 349:1993, Safety of machinery Minimum gaps to avoid crushing of parts of the human body EN 418:1992, Safety of machinery Emergency stop equipment Functional aspects Principles for design EN 457:1992, Safety of machinery Auditory danger sig
42、nals General requirements Design and testing (ISO 7731:1986, modified) EN 563:1994, Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces EN 574:1996, Safety of machinery Two-hand control devices Functional aspects Principles fo
43、r design EN 614-1:1995, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles !EN 617“, Continuous handling equipment and systems Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers !EN 618“, Continu
44、ous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk material except fixed belt conveyors !EN 619“, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads !EN 741“, Continuous h
45、andling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials EN 811:1996, Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs EN 842:1996, Safety of machinery Visual danger signals General requir
46、ements Design and testing EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery Safety related parts of control systems Part 1: General principles for design EN 1005-1:2001, Safety of machinery Huma
47、n physical performance Part 1: Terms and Definitions !EN 1005-2, Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery“ EN 1005-3:2002, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operati
48、on EN 1037:1995, Safety of machinery Prevention of unexpected start-up EN 1050:1996, Safety of Machinery Principles for Risk Assessment EN 1070:1998, Safety of machinery Terminology EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection BS E
49、N 620:2002+A1:2010EN 620:2002+A1:2010 (E) 7 EN 1127-1:1997, Explosive Atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN 1760-2:2001, Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars !E
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1