EN 621-2009 en Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW without a fan to assist transportation of combustion .pdf

1、BS EN 621:2009ICS 97.100.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDNon-domestic gas-fired forced convectionair heaters for spaceheating not exceedinga net heat input of 300kW, without a fan toassist transportation ofcombustion air and/orcombustion produc

2、tsThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 58602 6Amendments/corrigenda issued since publicationDate CommentsBS EN 621:2009National forewordThis British Standard is the UK implementation of EN 621:

3、2009. Itsupersedes BS EN 621:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/20, Non-domestic space heaters (gas).A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport

4、 to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 621:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 621 November 2009 ICS 97.100.20 Supersedes EN 6

5、21:1998English Version Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products Gnrateurs dair chaud convection force utilisant les combustibles gazeux pour le

6、chauffage de locaux autres que lhabitat individuel, de dbit calorifique sur Hi infrieur ou gal 300 kW, sans ventilateur pour aider lalimentation en air comburant et/ou lvacuation des produits de combustion Gasbefeuerte Warmlufterzeuger mit erzwungener Konvektion zum Beheizen von Rumen fr den nicht-h

7、uslichen Gebrauch mit einer Nennwrmebelastung nicht ber 300 kW, ohne Geblse zur Befrderung der Verbrennungsluft und/oder der Abgase This European Standard was approved by CEN on 10 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

8、for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three offi

9、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria

10、, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITT

11、EE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 621:2009: EBS EN 621:2009EN 621:2009 (E)

12、 2 Contents Page Foreword . 41 Scope . 52 Normative references . 53 Terms and definitions. 73.1 Appliance and its constituent parts 73.2 Adjustment, control and safety devices . 93.3 Operation of the appliance 113.4 Gases . 143.5 Conditions of operation and measurement . 153.6 Marking of the applian

13、ce and packaging . 164 Classification . 164.1 Classification of gases . 164.2 Classification of appliances according to the gases capable of being used . 174.3 Classification of appliances according to the mode of evacuation of the combustion products . 185 Construction and design requirements 195.1

14、 General . 195.2 Adjusting, control and safety devices 255.3 Ignition devices . 285.4 Flame supervision system . 295.5 Start-gas flame establishment . 305.6 Main flame establishment 315.7 Main burner . 325.8 Facility for remote control . 325.9 Thermostats and control of air temperature 325.10 Combus

15、tion chamber pressure reliefs . 335.11 Facilities for commissioning and testing 336 Operational requirements 346.1 Safety of operation . 346.2 Efficiency . 387 Test methods . 397.1 General . 397.2 Construction and design . 467.3 Safety of operation . 477.4 Efficiency . 698 Marking and instructions .

16、 758.1 Marking of the appliance 758.2 Marking of the packaging 768.3 Utilization of symbols on the appliance and packaging . 768.4 Instructions . 789 Evaluation of POCED conformity and their associated terminals . 809.1 General . 809.2 Type testing . 809.3 Factory production control (FPC) . 81Annex

17、A (informative) National situations 83A.1 General . 83A.2 Categories listed in the body of the standard and marketed in different countries 83BS EN 621:2009EN 621:2009 (E) 3 A.3 Appliance supply pressures corresponding to the categories given in A.2 . 85A.4 Special categories marketed nationally or

18、locally . 86A.5 Test gases corresponding to the special categories given in A.4 . 90A.6 Gas connections in the various countries 91A.7 Flue connections in the various countries . 93Annex B (informative) Equivalence rules 94B.1 Conversion to categories within a restricted Wobbe index range . 94B.2 Co

19、nversion to categories within an identical Wobbe index range . 94B.3 Conversion to categories within a wider Wobbe index range 95Annex C (informative) Facilities for commissioning and testing 96C.1 Appliances with automatic ignition of a start-gas flame . 96C.2 Appliances with direct automatic ignit

20、ion of the main burner . 96Annex D (informative) Identification of gas types in use in various countries . 97Annex E (informative) A-deviations 98E.1 General . 98E.2 Switzerland . 98Annex F (normative) Special national conditions 99F.1 General . 99F.2 Belgium . 99F.3 Italy 99Annex G (informative) Na

21、tional solutions for countries whose national bodies are Affiliate Members of CEN . 100G.1 Categories listed in the body of the standard and marketed in different countries . 100G.2 Appliance supply pressures corresponding to the categories given in G.1 . 100G.3 Special categories marketed nationall

22、y or locally . 100G.4 Gases and test pressures corresponding to the special categories given in G.3 100Annex H (informative) Calculation of conversions of NOx 101Annex I (informative) An example of a sampling plan . 102I.1 Sampling plans 102I.2 Inspection levels and procedures 103Annex ZA (informati

23、ve) Relationship between this European Standard and the Essential Requirements of EU Directive 90/396/EEC . 104Annex ZB (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 106ZB.1 Scope and relevant characteristics . 106ZB.2 Procedure

24、(s) for attestation of conformity of construction products . 108ZB.3 CE marking and labelling 110Bibliography 112BS EN 621:2009EN 621:2009 (E) 4 Foreword This document (EN 621:2009) has been prepared by Technical Committee CEN/TC 180 “Domestic and non-domestic gas fired air heaters and non-domestic

25、overhead radiant heaters”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest

26、by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 621:1998. This document has been prepared und

27、er a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. This revision modifies EN 621:199

28、8. It has been prepared to incorporate requirements for combustion products evacuation ducts, POCEDs, supplied as an integral part of the system to support the EU Directive 89/106/EEC on construction products under mandate M105. To this end it extends the scope of the standard to cover Type B41 appl

29、iances. Furthermore, the opportunity presented by this revision has been taken to update the standard in respect to EN 437:2003. NOTE For countries requesting special categories (specified in EN 437:2003), the absence of specific information concerning A.4.3 and A.4.4 implies that the general requir

30、ements described in the body of the standard (see 5.1.1, 5.2.2, 5.2.3 and 5.2.5) also apply to these special categories. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,

31、 Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 621:2009EN 621:2

32、009 (E) 5 1 Scope This European Standard specifies the requirements and test methods for the safety and efficiency of non-domestic gas-fired air heaters not exceeding a net heat input of 300 kW with (an) atmospheric burner(s) and without a fan to assist the transportation of combustion air and/or fl

33、ue gases, hereafter referred to as “appliances“. This European Standard applies to Type B11, B41, C11and C31appliances intended for use in other than single unit residential dwellings. Provision of the heated air may be by means of ducting or may be directly into the heated space. This standard does

34、 not apply to: a) appliances intended for use in a single unit residential dwelling; b) appliances of the condensing type; c) appliances for outdoor installation; d) dual purpose air conditioning appliances (heating and cooling); e) appliances where the air is heated by an intermediate fluid; f) app

35、liances with forced draught burners; g) appliances fitted with a manual or automatic means of adjusting the combustion air supply or the combustion products evacuation (including flue dampers); h) portable or transportable forced convection appliances; i) appliances having multiple heating units wit

36、h a single draught diverter; j) appliances fitted with more than one flue outlet; k) appliances that are designed for continuous condensation within the flue system under normal operating conditions; l) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic. This stand

37、ard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for appliances which are no

38、t type tested would need to be subject to further consideration. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docume

39、nt (including any amendments) applies. EN 88-1, Pressure regulators and associated safety devices for gas appliances Part 1: Pressure regulators for inlet pressures up to and including 500 mbar EN 125, Flame supervision devices for gas burning appliances Thermoelectric flame supervision devices BS E

40、N 621:2009EN 621:2009 (E) 6 EN 126, Multifuctional controls for gas burning appliances EN 161:2007, Automatic shut-off valves for gas burners and gas appliances EN 257, Mechanical thermostats for gas-burning appliances EN 298:2003, Automatic gas burner control systems for gas burners and gas burning

41、 appliances with or without fans EN 437:2003, Test gases Test pressures Appliance categories EN 1859:2000, Chimneys Metal chimneys Test methods EN 10226-1, Pipe threads where pressure tight joints are made on the threads Part 1: Taper external threads and parallel internal threads Dimensions, tolera

42、nces and designation EN 10226-2, Pipe threads where pressure tight joints are made on the threads Part 2: Taper external threads and taper internal threads Dimensions, tolerances and designation EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:

43、2001, modified) EN 60335-2-102, Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC 60335-2-102:2004, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (

44、IEC 60529:1989) EN 60584-1, Thermocouples Part 1: Reference tables (IEC 60584-1:1995) EN 60584-2:1993, Thermocouples Part 2: Tolerances (IEC 60584-2:1982 + A1:1989) EN 60730-1, Automatic electrical controls for household and similar use Part 1: General requirements (IEC 60730- 1:1999, modified) EN 6

45、0730-2-9:2002, Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000, modified) EN 61058-1, Switches for appliances Part 1: General requirements (IEC 61058-1:2000 + A1:2001, modified) EN ISO 228-1, Pipe thre

46、ads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) ISO 1182, Reaction to fire tests for building products Non-combustibility test ISO 7005-1, Metallic flanges Part 1: Steel flanges ISO 7005-2, Metallic flanges Part 2: Cast iron

47、 flanges ISO 7005-3, Metallic flanges Part 3: Copper alloy and composite flanges CR 1404, Determination of emissions from appliances burning gaseous fuels during type-testing BS EN 621:2009EN 621:2009 (E) 7 3 Terms and definitions For the purposes of this document, the following terms and definition

48、s apply. 3.1 Appliance and its constituent parts 3.1.1 non-domestic air heater appliance designed for the heating and possibly ventilation of a building other than a single unit residential dwelling 3.1.2 forced convection air heater appliance designed to provide space heating from a central source

49、by distributing heated air, by means of an air moving device, either through ducting or directly into the heated space 3.1.3 gas inlet connection the part of the appliance intended to be connected to the gas supply 3.1.4 mechanical joint mechanical means of obtaining soundness means of ensuring the soundness of an assembly of several (generally me