1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 686:2011Resilient floor coverings Specification for plain and decorative linoleum on a foam backingBS EN 686:2011 BRITISH STANDARDNational forewordThis British Standard is
2、the UK implementation of EN 686:2011. It supersedes BS EN 686:1997, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e P R I / 6 0 , R e s i l i e n t f l o o r c o v e r i n g s .A list of organizations represented on this committee can b
3、e obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 71955 4 ICS 97.150 Compliance with a British Standard cannot confer immunity from legal obligatio
4、ns.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 686:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 686 April 2011 ICS 97.150 Supersedes EN 686:1997E
5、nglish Version Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing Revtements de sol rsilients - Spcifications pour le linolum uni et dcoratif sur sous-couche de mousse Elastische Bodenbelge - Spezifikation fr Linoleum mit und ohne Muster mit Schaumrcken Thi
6、s European Standard was approved by CEN on 10 March 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
7、es concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN me
8、mber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
9、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue M
10、arnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 686:2011: EBS EN 686:2011EN 686:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .54 Identification .55 Requi
11、rements .55.1 General requirements 55.2 Classification requirements 86 Marking .9Annex A (informative) Optional properties 10Bibliography . 11BS EN 686:2011EN 686:2011 (E) 3 Foreword This document (EN 686:2011) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floo
12、r coverings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October
13、2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 686:1997. According to the CEN/CENELEC Internal Regu
14、lations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma
15、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 686:2011EN 686:2011 (E) 4 1 Scope This European Standard specifies the characteristics of plain and decorated linoleum on a foam backing as a compound floor covering, sup
16、plied in roll form. To encourage the consumer to make an informed choice, this European Standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking. The term
17、linoleum is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are not included in this standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For date
18、d references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 425, Resilient and laminate floor coverings Castor chair test EN 426, Resilient floor coverings Determination of width, length, straightness and
19、flatness of sheet material EN 428, Resilient floor coverings Determination of overall thickness EN 429, Resilient floor coverings Determination of the thickness of layers EN 430, Resilient floor coverings Determination of mass per unit area EN 431, Resilient floor coverings Determination of peel res
20、istance EN 433, Resilient floor coverings Determination of residual indentation after static loading EN 435, Resilient floor coverings Determination of flexibility EN 670, Resilient floor coverings Identification of linoleum and determination of cement content and ash residue EN 685, Resilient, text
21、ile and laminate floor coverings Classification EN ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998) BS EN 686:2011EN 686:2011 (E) 5 3 Terms and definitions For the purposes of this
22、 document, the following terms and definitions apply. 3.1 linoleum cement binder in linoleum, consisting of a mixture of linseed oil and/or other vegetable drying oils, rosin and drying oil catalysts, which is converted to a semi-elastic mass by an oxidative curing process 3.2 linoleum product produ
23、ced by calendering a homogeneous mixture of linoleum cement, cork and/or wood flour, pigments and inorganic filler onto a fibrous backing; the product is then converted into its final form by an oxidative curing process. NOTE The only chemical cross-linking bondings in linoleum will be those which a
24、re formed during the oxidation process. 3.3 linoleum on a foam backing product formed by laminating linoleum on to a foam layer 4 Identification Linoleum shall be identified by its ability to be disintegrated in 0,5 mol/l potassium hydroxide/methanol solution and by the determination of cement conte
25、nt and ash residue. The minimum amount of linoleum cement shall be 30 % when tested in accordance with EN 670. The maximum amount of inorganic filler (ash residue) shall be 50 % when tested in accordance with EN 670. 5 Requirements 5.1 General requirements All classes of linoleum on foam backing sha
26、ll comply with the appropriate general requirements specified in Table 1, when tested in accordance with the methods given therein. BS EN 686:2011EN 686:2011 (E) 6 Table 1 General requirements Property Requirement Test method Rolls length m width mm Not less than the nominal values EN 426 Overall th
27、ickness mm average individual values Nominal value 0,20 Nominal value 0,25 EN 428 Thickness of linoleum mm average individual values Nominal value 0,15 Nominal value 0,20 EN 429 Thickness of fibrous backing average mm 0,80 Thickness of foam backing mm average Nominal value 0,10 Mass per unit area g/
28、m2average nominal value 10 % EN 430 Residual indentation after static loading mmaverage 0,30 EN 433 Flexibility Thickness Mandrel of linoleum diameter (nominal) 2,0 mm 30 mm 2,5 mm 40 mm Shall show no signs of cracking when bent around the appropriate mandrel EN 435 Method A BS EN 686:2011EN 686:201
29、1 (E) 7 Table 1 (continued) Property Requirement Test method Colour fastness to artificial light 6 minimum EN ISO 105-B02 Method 31)Effect of a castor chair No damage shall be apparent. EN 425 Peel resistance between foam backing and fibrous backing average N/50mm 10 EN 431 1)Before comparing the te
30、st piece, expose the reference sample together with the Blue Wool cloth to the xenon arc lamp, until a contrast is produced on Blue Wool Reference 2 equal to the contrast illustrated by Grey Scale 3. This step is necessary to remove the inherent stove yellowing of linoleum before the stable colourat
31、ion is achieved. BS EN 686:2011EN 686:2011 (E) 8 5.2 Classification requirements The classification scheme for resilient floor coverings is described in EN 685. The requirements for floor coverings described in this standard sold as a compound floor covering, in accordance with this scheme, are rela
32、ted to the nominal thickness of the linoleum, as shown in Table 2. Table 2 Classification Class Symbol Level of use Nominal thickness of the linoleum, mm 21 domestic moderate 2,0 22 domestic general 22+ domestic general 23 domestic heavy 31 commercial moderate 2,0 32 commercial general 33 commercial
33、 heavy 2,5 41 light industrial moderate 2,0 BS EN 686:2011EN 686:2011 (E) 9 6 Marking Floor coverings of plain and decorative linoleum on a foam backing and/or their packaging shall bear the following marking: a) number and date of this European Standard, i.e. EN 686:2011; b) manufacturers or suppli
34、ers identification; c) product name; d) colour/pattern, and batch and roll number; e) classes/symbols appropriate for the product; f) type of foam backing; g) length, width and thickness of rolls. BS EN 686:2011EN 686:2011 (E) 10 Annex A (informative) Optional properties Where the following properti
35、es are required for specific applications, the floor covering should be tested in accordance with the appropriate methods. electrical resistance (see EN 1081); electrostatic propensity (see EN 1815); effect of stains (see EN 423); cigarette resistance (see EN 1399): In general use, a linoleum floor
36、covering, depending on the colour and/or pattern, is expected to have the following rating when tested in accordance with EN 1399: Method A, stubbed cigarettes; rating 4 or higher Method B, burning cigarettes; rating 3 or higher sound insulation (see EN ISO 10140-3 and EN ISO 717-2). BS EN 686:2011E
37、N 686:2011 (E) 11 Bibliography 1 EN 423, Resilient floor coverings Determination of resistance to staining 2 EN 1081, Resilient floor coverings Determination of electrical resistance 3 EN 1399, Resilient floor coverings Determination of resistance to stubbed and burning cigarettes 4 EN 1815, Resilie
38、nt and textile floor coverings Assessment of static electrical propensity 5 EN ISO 10140-3, Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation (ISO 10140-3:2010) 6 EN ISO 717-2, Acoustics Rating of sound insulation in buildings an
39、d of building elements Part 2: Impact sound insulation (ISO 717-2:1996) This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents th
40、e UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendmen
41、t or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would
42、 inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest edi
43、tions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed t
44、o BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a
45、 wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111
46、 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Em
47、ail: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardiza
48、tion bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1