1、BSI Standards PublicationBS EN 771-6:2011Specification for masonry unitsPart 6: Natural stone masonry unitsBS EN 771-6:2011+A1:2015BS EN 771-6:2011+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 771-6:2011+A1:2015. It supersedes BS EN 771-6:2011, which
2、is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .EN 771-6:2011+A1:2015 is a “harmonized” European St
3、andard and fully takes into account the requirements of the European Commission mandate M116, Masonry and related products, given under the EU Construction Products Regulation (Regulation (EU) No. 305/2011).EN 771-6:2011+A1:2015 was the subject of transitional arrangements agreed under the Commissio
4、n mandate. In the UK, there were no corresponding national standards.The UK participation in its preparation was entrusted by Technical Committee B/519, Masonry and associated testing, to Subcommittee B/519/1, Masonry units.A list of organizations represented on this committee can be obtained on req
5、uest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 79493 3ICS 91.100.15Compliance with a Britis
6、h Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2011.Amendments/corrigenda issued since publicationDate Text affected31 March 2016 Implementation of CEN amendment A1:2015. Na
7、tional Foreword also updatedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 771-6:2011+A1 August 2015 ICS 91.100.15 Supersedes EN 771-6:2011English Version Specification for masonry units - Part 6: Natural stone masonry units Spcification pour lments de maonnerie - Partie 6: Elments de maonneri
8、e en pierre naturelle Festlegungen fr Mauersteine - Teil 6: Natursteine This European Standard was approved by CEN on 3 March 2011 and includes Amendment 1 approved by CEN on 11 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
9、 giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three
10、 official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodi
11、es of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Sp
12、ain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwi
13、de for CEN national Members. Ref. No. EN 771-6:2011+A1:2015 EEN 771-6:2011+A1:2015 (E) 2 Contents Page European foreword .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Materials of natural stone .8 5 Requirements for natural stone masonry units 8 5.1 General 8 5.2 Denomination .8
14、 5.3 Dimensions and tolerances 8 5.3.1 Dimensions .8 5.3.2 Dimensional tolerances 9 5.4 !Configuration and appearance“ . 10 5.4.1 Configuration 10 5.4.2 Surface appearance 10 5.5 Apparent density. 11 5.6 Mechanical strengths . 11 5.6.1 Compressive strength 11 5.6.2 Flexural strength . 11 5.7 Shear b
15、ond strength . 12 5.7.1 General . 12 5.7.2 Declaration based on fixed values 12 5.7.3 Declaration based on tests 12 5.8 Flexural bond strength . 12 5.9 Open porosity 12 5.10 Water absorption coefficient by capillarity 12 5.11 Durability . 13 5.12 Thermal properties . 13 5.13 Reaction to fire 13 5.14
16、 Water vapour permeability . 14 5.15 Dangerous substances 14 6 Description, designation and classification of natural stone masonry units 14 6.1 Description and designation . 14 6.2 Classification . 15 7 Marking 15 8 !Assessment and verification of constancy of performance (AVCP)“ 15 8.1 General . 1
17、5 8.2 Product type determination . 16 8.3 Factory production control 17 8.3.1 General . 17 8.3.2 Testing and measuring equipment . 17 8.3.3 Production equipment 17 8.3.4 Raw materials 17 8.3.5 Production process 17 8.3.6 Finished product testing 18 8.3.7 Statistical techniques . 18 8.3.8 Marking and
18、 stock control of products 18 8.3.9 Traceability 18 EN 771-6:2011+A1:2015 (E) 3 8.3.10 Nonconforming products . 18 Annex A (normative) !Sampling for type testing and for independent testing of consignment“ . 19 A.1 General . 19 A.2 Sampling procedure 19 A.2.1 General . 19 A.2.2 Random sampling . 19
19、A.2.3 Representative sampling 19 A.2.4 Dividing the sample . 20 A.2.5 Number of units required for testing . 20 Annex B (informative) !Guidance for test frequencies for designing a FPC system to demonstrate conformity of finished products with the requirements of the standard and the declaration of
20、the manufacturer“ . 21 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 23 ZA.1 Scope and relevant characteristics . 23 ZA.2 Procedure(s) for AVCP of natural stone masonry units 24 ZA.2.1 System(s) of AVCP 24 ZA.2.2 Decla
21、ration of performance (DoP) . 26 ZA.3 CE marking and labelling 30 Bibliography 34 BS EN 771-6:2011+A1:2015EN 771-6:2011+A1:2015 (E)EN 771-6:2011+A1:2015 (E) 2 Contents Page European foreword .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Materials of natural stone .8 5 Requiremen
22、ts for natural stone masonry units 8 5.1 General 8 5.2 Denomination .8 5.3 Dimensions and tolerances 8 5.3.1 Dimensions .8 5.3.2 Dimensional tolerances 9 5.4 !Configuration and appearance“ . 10 5.4.1 Configuration 10 5.4.2 Surface appearance 10 5.5 Apparent density. 11 5.6 Mechanical strengths . 11
23、5.6.1 Compressive strength 11 5.6.2 Flexural strength . 11 5.7 Shear bond strength . 12 5.7.1 General . 12 5.7.2 Declaration based on fixed values 12 5.7.3 Declaration based on tests 12 5.8 Flexural bond strength . 12 5.9 Open porosity 12 5.10 Water absorption coefficient by capillarity 12 5.11 Dura
24、bility . 13 5.12 Thermal properties . 13 5.13 Reaction to fire 13 5.14 Water vapour permeability . 14 5.15 Dangerous substances 14 6 Description, designation and classification of natural stone masonry units 14 6.1 Description and designation . 14 6.2 Classification . 15 7 Marking 15 8 !Assessment a
25、nd verification of constancy of performance (AVCP)“ 15 8.1 General . 15 8.2 Product type determination . 16 8.3 Factory production control 17 8.3.1 General . 17 8.3.2 Testing and measuring equipment . 17 8.3.3 Production equipment 17 8.3.4 Raw materials 17 8.3.5 Production process 17 8.3.6 Finished
26、product testing 18 8.3.7 Statistical techniques . 18 8.3.8 Marking and stock control of products 18 8.3.9 Traceability 18 EN 771-6:2011+A1:2015 (E) 3 8.3.10 Nonconforming products . 18 Annex A (normative) !Sampling for type testing and for independent testing of consignment“ . 19 A.1 General . 19 A.
27、2 Sampling procedure 19 A.2.1 General . 19 A.2.2 Random sampling . 19 A.2.3 Representative sampling 19 A.2.4 Dividing the sample . 20 A.2.5 Number of units required for testing . 20 Annex B (informative) !Guidance for test frequencies for designing a FPC system to demonstrate conformity of finished
28、products with the requirements of the standard and the declaration of the manufacturer“ . 21 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 23 ZA.1 Scope and relevant characteristics . 23 ZA.2 Procedure(s) for AVCP of n
29、atural stone masonry units 24 ZA.2.1 System(s) of AVCP 24 ZA.2.2 Declaration of performance (DoP) . 26 ZA.3 CE marking and labelling 30 Bibliography 34 BS EN 771-6:2011+A1:2015EN 771-6:2011+A1:2015 (E)EN 771-6:2011+A1:2015 (E) 4 European foreword This document (EN 771-6:2011+A1:2015) has been prepar
30、ed by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016, and conflicting national standards shall be
31、withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 771-6:2011“. This do
32、cument includes Amendment 1 approved by CEN on 2015-01-11. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and support
33、s basic requirements for construction works of the EU Construction Products Regulation (Regulation (EU) No 305/2011). For relationship with EU Regulation/Directive(s), see informative Annex ZA, which is an integral part of this document.“ This European Standard also takes into account the general ru
34、les for unreinforced and reinforced masonry in EN 1996-1-1. EN 771, Specification for masonry units consists of: Part 1: Clay masonry units Part 2: Calcium silicate masonry units Part 3: Aggregate concrete masonry units (Dense and light weight aggregates) Part 4: Autoclaved aerated concrete masonry
35、units Part 5: Manufactured stone masonry units Part 6: Natural stone masonry units According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu
36、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 7
37、71-6:2011+A1:2015 (E) 5 1 Scope This European Standard specifies the characteristics and performance requirements of masonry units manufactured from natural stone the width of which is equal to or greater than 80 mm, for which the main intended uses are common, facing or exposed masonry units in loa
38、dbearing or non-loadbearing building and civil engineering applications These units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound i
39、nsulation and sound absorption. This European Standard includes natural stone masonry units of an overall non-rectangular parallelepiped shape, specially shaped and accessory units for internal and external application. It defines the performance related to e.g. strength, petrographic description, d
40、ensity, porosity, dimensional accuracy, thermal conductivity, water absorption, and frost resistance and provides for the !assessment and verification of constancy of performance (AVCP)“ of the product to this European Standard. The marking requirements for products covered by this European Standard
41、 are also included. This European Standard does not cover storey height panels, natural stone for paving, chimney flue linings nor units intended for use as damp proof course. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated
42、references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 772-1:2011, Methods of test for masonry units Part 1: Determination of compressive strength EN 772-11, Methods of test for masonry units Part 11: D
43、etermination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units EN 772-16:2011, Methods of test for masonry units Part 16: Determination of d
44、imensions EN 772-20, Methods of test for masonry units Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units EN 998-2:2010, Specification for mortar for masonry Part 2: Masonry mortar EN 1052-2, Methods of test for masonry Part 2: Deter
45、mination of flexural strength EN 1052-3, Methods of test for masonry Part 3: Determination of initial shear strength EN 1745, Masonry and masonry products Methods for determining thermal properties EN 1936, Natural stone test methods Determination of real density and apparent density, and of total a
46、nd open porosity EN 12371, Natural stone test methods Determination of frost resistance EN 12372, Natural stone test methods Determination of flexural strength under concentrated load EN 12407, Natural stone test methods Petrographic examination EN 12440, Natural stone Denomination criteria BS EN 77
47、1-6:2011+A1:2015EN 771-6:2011+A1:2015 (E)EN 771-6:2011+A1:2015 (E) 4 European foreword This document (EN 771-6:2011+A1:2015) has been prepared by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard
48、, either by publication of an identical text or by endorsement, at the latest by February 2016, and conflicting national standards shall be withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN a
49、nd/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 771-6:2011“. This document includes Amendment 1 approved by CEN on 2015-01-11. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports basic requirements for construction works of the EU Construction Products Regulation (Regulation (
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1