1、BRITISH STANDARD Specification for installations inside buildings conveying water for human consumption - Part 1: General The European Standard EN 806-1:2000, with incorporation of amendment A1:2001, has the status of a British Standard ICs 91.140.60 BS EN 806-1:2000 Incorporating Amendment No. 1 NO
2、 COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 806-1:2000 been prepared under the direction of the Sector Amd.No. Committee for Builing and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 November 2000 13472 O BS
3、I17January2002 National foreword Date Comments 17 January 2002 Indicated by a sideline This British Standard is the official English language version of EN 806-1:2000, including amendment A1:2001. The UK participation in its preparation was entrusted by Technical Committee W504, Water supply, to Sub
4、committee W504/2, Internal systems and components, which has the responsibility to: - aid enquirers to understand the text; - present to the responsible European committee any enquiries on the - monitor related international and European developments and promulgate interpretation, or proposals for c
5、hange, and keep the UK interests informed; them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in
6、the BSI Standards Catalogue under the section entitled ?International Standards Correspondence Index?, or by using the ?Find? facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are
7、responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 32, an inside back cover and a back cover. The BSI cop
8、yright notice displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment. ISBN O 580 36706 1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 806-1 September 2000 + AI Auciust 2001 ICs 91.140.60 English versi
9、on Specifications for installations inside buildings conveying water for human consumption - Part 1 : General (includes amendment AI :2001) Spcifications techniques relatives aux installations pour leau destine la consommation humaine lintrieur des btiments - Partie 1: Gnralits (inclut lamendement A
10、I :2001) Technische Regeln fr Trinkwasser-Installationen - Teil 1: Allgemeines (enhlt nderung A1:2001) This European Standard was approved by CEN on 20 January 2000. Amendment A1:2001 was approved by CEN on 29 June 2001. CEN members are bound to comply with the CENKENELEC Internal Regulations which
11、stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standa
12、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standa
13、rds bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALI
14、SATION Central Secretariat: rue de Stassart. 36 8-1050 Brussels O 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 806-1:2000 + A1:2001 E Page 2 EN 806-1 :2000 Contents Page . 3 . 4 2 Normative references 4 3 . 5 4 5 5 Terms an
15、d definitions . 6 Annex A (informative) Examples for the use of graphic symbols . 31 Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Competence and duties for design, construction and operation . Graphic symbols and abbreviations . . . . . .
16、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 EN 806-1 :2000 Foreword This European Standard has been prepared by Technical Committee CEN/TC 164, ”Water supply”, the
17、secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2001, and conflicting national standards shall be withdrawn at the latest by March 2001. Annex A of thi
18、s European Standard is informative. NOTE This is the first part of the European Standard EN 806 consisting of 5 parts as follows : EN 806-1, General EN 806-2, Design EN 806-3, Pipe sizing EN 806-4, Installation EN 806-5, Operation and maintenance According to the CENKENELEC Internal Regulations, the
19、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingd
20、om. Foreword to amendment AI This amendment EN 806-1 :2000/A1:2001 to the EN 806-1 :2000 has been prepared by Technical Committee CEN/TC 164 Water supply, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an i
21、dentical text or by endorsement, at the latest by February 2002, and conflicting national standards shall be withdrawn at the latest by December 2004. According to the CENKENLEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European
22、 Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 4 EN 806-1 :2000 1 Scope This European Standard specifies requirements for and gives rec
23、ommendations on the design, installation, alteration, testing, maintenance and operation of potable water installations within buildings and, for certain purposes, pipework outside buildings but within the premises (see Figure 1). It covers the system of pipes, fittings and connected appliances inst
24、alled for supplying potable water. If there is a private drinking water supply within the property boundary, the scope of this standard also covers the pipe system from the point of entry from that private water supply. The sphere of application ends at the downstream end of the potable water instal
25、lation at which point must be an air gap, (e. g. at a kitchen tap) or a protection device, (e. g. at a hose union tap). 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriat
26、e places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication
27、 referred to applies. EN 805: 1999, Wafer supply - Requiremenfs for sysfems and componenfs oufside buildings. EN 171 7: 1999, Profecfion againsf pollufion of pofable wafer in drinking wafer insfallafions and general requiremenfs of devices fo prevenf pollufion by backflow. EN 6061 7-2, Graphical sym
28、bols for diagrams - Par 2: Symbol elemenfs, qualifying symbols and ofher symbols having general applicafion. EN 6061 7-4, Graphical symbols for diagrams - Par 4: Basic passive componenfs. EN 6061 7-6, Graphical symbols for diagrams - Par 6: Producfion and conversion of elecfrical energy. prEN 806-2:
29、 1996, Specificafions for insfallafions inside buildings conveying wafer for human consumpfion - Par 2: Design. prEN 806-3: 1997, Specificafions for insfallafions inside buildings conveying wafer for human consumpfion - Par 3: Pipe sizing. IS0 4063, Welding, and allied processes - Nomenclafure of pr
30、ocesses and reference numbers. IS0 6412-1, Technical drawings - Simplified represenfafion of pipelines - Par 1: General rules and orthogonal represenfafion. IS0 1461 7-3, Graphical symbols for diagrams - Par 3: Connecfions and relafed devices. IS0 1461 7-4, Graphical symbols for diagrams - Par 4: Ac
31、fuafors and relafed devices. IS0 1461 7-5, Graphical symbols for diagrams - Par 5: Measuremenf and confrol devices. IS0 1461 7-21, Graphical symbols for diagrams - Par 21: Basic mechanical componenfs. IS0 1461 7-22, Graphical symbols for diagrams - Par 22: Valves and dampers. Page 5 EN 806-1 :2000 3
32、 Objectives The main objectives are to ensure that: - the deterioration in water quality within the installation is avoided; - the required flow of water and pressure is available at the draw-off points and at the connection points of appliances (e. g. water heaters, washing machines); - the potable
33、 water meets the standards for physical, chemical and microbiological quality at the draw-off points; - all parts of the installation do not cause danger to health and do not damage property within calculated lifetimes: - the maintenance of the installation meets the functional requirements at all t
34、imes during its lifetime; - sound levels are kept to a practicable minimum; - contamination of the public water supply, undue consumption, leakage and misuse is avoided. 4 Competence and duties for design, construction and operation 4.1 Designer The design shall be carried out by competent persons,
35、e. g. persons with relevant experience, qualifications1) , knowledge of regulations and safety requirements. 4.2 Installer The work for construction, alteration and maintenance shall be carried out by competent installers in accordance with qualification required by national or local regulations. 4.
36、3 Water supplier The data necessary for design and construction (e. g. supply pressure, the supply flow rates and the water quality analysis at the point of delivery) shall be determined before commencement of work: the information should be made available by the water supplier (or the operator of a
37、 private or separate water supply). 4.4 Operator The owner/occupier is responsible for ensuring the safe operation and maintenance of the potable water installation and should be provided with the necessary information. 5 Terms and definitions For the purposes of this European Standard, the followin
38、g terms and definitions apply. 5.1 potable water for the purpose of this specification, potable water shall be suitable for human consumption and conform with the relevant regulations based on ECC directives The water may also be used for washing, cooking and sanitary purposes (at temperatures up to
39、 95 OC to allow for malfunctions). 1) European regulations to be prepared. Page 6 EN 806-1 :2000 5.2 non-potable water the collective definition for all kinds of water other than potable water 5.3 potable water installations for the principal representation see annex A 5.3.1 service pipe the water p
40、ipe which supplies water from the local main to the potable water installation 5.3.2 supply Pipe the water pipe which conducts water from the supply stop valve to connection draw off points and connection points of appliances 5.3.3 water meter assembly the water meter assembly comprises the water me
41、ter and associated fittings 5.3.4 distributing pipe distributing pipe means any pipe (other than an overflow pipe or a flush pipe) conveying water from a storage cistern, or from a hot water appliance supplied from a feed cistern, and under pressure from that cistern 5.3.5 header pipe the horizontal
42、 pipe between the supply stop valve and the rising pipe 5.3.6 rising (falling) pipe the part of the pipe (supply or distributing pipe) which leads from floor to floor and from which the floor service pipes or dead-legs branch off 5.3.7 floor service pipe the pipe which branches off from the rising (
43、falling) pipe within a floor and from which dead-legs branch 5.3.8 dead-leg the pipe which is leading to a draw-off point 5.3.9 return pipe a pipe in a hot potable water circuit in which water returns to the boiler or to the hot water storage vessel 5.3.1 O firefighting pipe firefighting supply pipe
44、s with extinguishing devices (e. g. hydrants, sprinklers and water curtains) 5.4 valves 5.4.1 ferrule a device for connecting a service pipe to the local main. The device may contain a service stop valve 5.4.2 service stop valve the water suppliers stop valve, which is the first valve in the service
45、 pipe after or included in the ferrule Page 7 EN 806-1 :2000 5.4.3 supply stop valve the first stop valve in the premises which controls the downstream supply and may be included in a water meter assembly 5.4.4 servicing valve that valve intended to facilitate maintenance or servicing of a water fit
46、ting or appliance 5.4.5 flow reducing valve a device for reducing the flow by narrowing the cross-section 5.4.6 d raw-off point those points in the potable water installation from which water can be drawn 5.4.7 tap a valve with an air gap from which water is drawn 5.4.8 drain tap a tap fitted to dra
47、in the contents of the potable water installation or of parts of it 5.4.9 protection unit a unit to protect the quality of potable water (see EN 1717:1999) 5.4.1 O safety device a device which operates when dangerous physical operating conditions occur, e. g. excess pressure or temperature 5.4.1 1 a
48、djustable control valve a valve for regulating flow, pressure or temperature 5.5 measuring device a device for measuring parameters e. g. pressure, temperature or volume 5.6 appliance, equipment a device in which the potable water is used and/or is modified e. g. water heater, chemical dosing unit,
49、coff ee-machine, W C 5.7 prefabricated unit a unit comprising assemblies of pipes, fittings, valves, equipment etc., which is assembled off-site and is transported in complete units to the place of installation 5.8 h yd rau I i c def i n it i o ns 5.8.1 flow rate The quotient of the volume of water which is flowing and the time 5.8.2 vel oc ty the quotient of flow rate and internal cross-section Page 8 EN 806-1 :2000 5.8.3 direction of flow the direction of flow during normal operation 5.8.4 service pressure (SP) the internal pressure at the point of conne
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1