EN 9300-013-2013 en Aerospace series - LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 013 Reference process d.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 9300-013:2013Aerospace series LOTARLOng Term Archiving andRetrieval of digital technicalproduct documentation such as3D, CAD and PDM dataPart 013: Reference process descrip

2、tionArchival StorageBS EN 9300-013:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 9300-013:2013.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/1, International and European Aerospace Policy andProcesses.A list of organizati

3、ons represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 97

4、8 0 580 55803 0ICS 01.110; 35.240.30; 35.240.60; 49.020Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate Tex

5、t affectedBS EN 9300-013:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 9300-013 January 2013 ICS 01.110; 35.240.30; 35.240.60; 49.020 English Version Aerospace series - LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 0

6、13: Reference process description Archival Storage Srie arospatiale - LOTAR - Archivage Long Terme et rcupration des donnes techniques produits numriques, telles que CAD, 3D et PDM - Partie 013: Description du processus de rfrence Stockage darchive Luft- und Raumfahrt - LOTAR - Langzeitarchivierung

7、und Bereitstellung digitaler technischer Produktdokumentationen, beispielsweise 3D, CAD und PDM Daten - Teil 013: Referenzprozessbescheibung Speicherung This European Standard was approved by CEN on 24 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which sti

8、pulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European

9、 Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are th

10、e national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani

11、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means res

12、erved worldwide for CEN national Members. Ref. No. EN 9300-013:2013: EBS EN 9300-013:2013EN 9300-013:2013 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviations 5 4 Applicability 5 5 Archival storage .6 6 Detailed process steps descri

13、ption .7 6.1 General 7 6.2 AIP transfer to main storage .7 6.3 Initiate digital time signature process .7 6.4 Set digital time signature 7 6.5 Store to media 8 6.6 Storage assurance .8 6.7 Update Descriptive Information .8 6.8 Update meta database .9 6.9 Confirm the archiving 9 6.10 Generate confirm

14、ation report .9 6.11 Receive confirmation (by the administrator) 9 6.12 Receive confirmation (by the producer) . 10 6.13 Disaster Recovery. 10 6.14 Error handling for archival storage . 10 6.15 Manual edition of Descriptive Information (by the producer) 10 6.16 Manual edition of Descriptive Informat

15、ion (by the administrator) . 11 7 Support process steps . 11 7.1 Preservation Planning 11 7.2 Guarantee quality of archive . 11 7.3 Administration . 11 7.4 Data Management . 11 8 Data descriptions 12 8.1 General . 12 8.2 Involved roles 12 8.3 Involved data . 12 Bibliography . 15 Figure Figure 1 Arch

16、ival Storage .6 BS EN 9300-013:2013EN 9300-013:2013 (E) 3 Foreword This document (EN 9300-013:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, th

17、is Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the

18、 latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all su

19、ch patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Mace

20、donia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 9300-013:2013EN 9300-013:2013 (E) 4 Introduction This European

21、Standard was prepared jointly by ASD-STAN and the PROSTEP iViP Association. The PROSTEP iViP Association is an international non-profit association in Europe. For establishing leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from leading industries, system

22、vendors and research institutions. Its product and process data standardization activities at European and worldwide levels are well known and accepted. The PROSTEP iViP Association sees this standard and the related parts as a milestone of product data technology. Users should note that all standar

23、ds undergo revision from time to time and that any reference made herein to any other standard implies its latest edition, unless otherwise stated. BS EN 9300-013:2013EN 9300-013:2013 (E) 5 1 Scope This European Standard provides a detailed description for the recommended process of the Archival Inf

24、ormation Package within the archive as overviewed in EN 9300-010. The main focus lies in the secure process, which implies the setting of digital signatures, disaster recovery and update of archive meta database. 2 Normative references The following documents, in whole or in part, are normatively re

25、ferenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 9300-003, Aerospace series LOTAR LOng Term Archiving and Retrieval o

26、f digital technical product documentation such as 3D, CAD and PDM data Part 003: Fundamentals and concepts EN 9300-007, Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 007: Terms and References 1)EN 9300-010, Aeros

27、pace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 010: Overview Data Flow 1)ISO 14721:2003, Space data and information transfer systems Open archival information system Reference model OAIS 3 Terms, definitions and abbrev

28、iations For the purposes of this standard, the terms, definitions and abbreviations given in EN 9300-007 shall apply. 4 Applicability This EN 9300-013 is applicable to new 3-D product data records and may be applicable to existing 3D product data records, on current and earlier products, produced us

29、ing previous regulations, standards and procedures. The current version is focused on product data as defined in the domain specific parts. 1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). BS EN 9300-013:2013EN 9300-013:2013 (E) 6 5 Archival storag

30、e See Figure 1. Figure 1 Archival Storage The process includes the setting of digital time signatures, generation of additional Descriptive Information (DI) for AIPs (meta data for the archive), the physical storage of the data within the archive and error checking as well as the steps needed disast

31、er recovery of the stored data. Each company should meet the general recommendations for an archive system and its security, as for example described in ISO 14721:2003 (OAIS). These general recommendations are out of scope. The sub process shall be certified. Process Steps Store to Media, Storage as

32、surance, Update meta-database and Disaster Recovery cover administrative aspects of the archive and its software. The steps are out of scope for the process description and this standard. They are shown for completeness. If needed by the community, the preservation of the Descriptive Information of

33、the Archive will be described in the recommended practices of the part 13. Input data: AIP DI Output data: Process control data BS EN 9300-013:2013EN 9300-013:2013 (E) 7 6 Detailed process steps description 6.1 General Input and output data described in this standard represent the minimal requiremen

34、ts for the fulfilment of the process steps. Additional data may be added, but must match at a minimum the requirements for the information package. (See EN 9300-003, Section 5.3.2.1 “Definition of the core model”). 6.2 AIP transfer to main storage The Archive transfers the AIP from the working envir

35、onment to the physical storage environment. Input data: AIP Output data: AIP 6.3 Initiate digital time signature process The administrator initiates the digital time signature process. Output data: Request for authentication Request for time stamp Secret key 6.4 Set digital time signature The archiv

36、e sets a digital (time) signature according to the applicable digital signature law. This assures the data integrity, readability and exchangeability during the retention period, and may be used as evidence when identifying the provenance of the information. NOTE A digital time signature is any uniq

37、ue set of letters, characters, symbols or code attached to a digital document with the intention of identifying the sender. At the lower end of the e-signature security scale are formats such as email signatures and the simple attachment of signature images. Higher up the scale we find more secure f

38、ormats such as pin numbers. At the upper end of the scale are formats using more complex technologies combining mathematical processes, encryption and controlled systems. Input data: Request for authentication Request for time stamp Secret key AIP Support information Output data: AIP Digital signatu

39、re information BS EN 9300-013:2013EN 9300-013:2013 (E) 8 6.5 Store to media The Archive stores the AIP physically onto a medium according to meet the requirements of long term archiving and the availability of the stored data. Input data: AIP Support information Output data: Storage information 6.6

40、Storage assurance The storage assurance function validates the successful transfer of the AIP to the staging area. For digital submissions, these mechanisms might include Cyclic Redundancy Checks (CRCs) or checksums associated with each data file, or the use of system log files to record and identif

41、y any file transfer or media read/write errors. Input data: Storage information Output data: In any case: Statistics If assurance is successful: Results If assurance fails: Error report 6.7 Update Descriptive Information The archive updates the set of descriptive information regarding the storage as

42、surance and digital time signature information. Input data: Results Digital time signature information DI Output data: If update is successful: DI If update fails: Error report BS EN 9300-013:2013EN 9300-013:2013 (E) 9 6.8 Update meta database The archive generates a new entry within the archives me

43、ta database. The new entry contains the descriptive information, in addition for example, the reference information, which defines the storage location. Input data: DI Support information Output data: If update is successful: Meta database update report Meta database update information (Including th

44、e Descriptive Information) If update fails: Error report 6.9 Confirm the archiving The archive confirms the archiving process after the update of the meta database. Input data: Meta database update report Output data: Confirmation information 6.10 Generate confirmation report The archive generates a

45、 confirmation report which includes the feedback information for the consumer/ administrator according to the archiving/removal procedures. Input data: Confirmation information Output data: Archiving confirmation report 6.11 Receive confirmation (by the administrator) The administrator receives the

46、archives confirmation report. Input data: Confirmation report (for archiving) Output data: BS EN 9300-013:2013EN 9300-013:2013 (E) 10 6.12 Receive confirmation (by the producer) The producer receives the archives confirmation report. Input data: Confirmation report (for archiving) Output data: 6.13

47、Disaster Recovery The archive duplicates the AIPs and stores the duplicate in a physically separate facility. Input data: If disaster recovery is successful: AIP Meta database update information Output data: If disaster recovery fails Error report 6.14 Error handling for archival storage Within this

48、 process the Administrator has to perform error fixing procedures for the storage of archiving information packages, the update of meta database and the preparation for disaster recovery. Input data: Error report Output data: Process control data 6.15 Manual edition of Descriptive Information (by th

49、e producer) The Producer shall have the ability to edit and attach several descriptions to the AIPs. The additional Descriptive Information could be, for example, the end of production date for a product - this is not known at the date the data is stored. Input data: DI Output data: DI (completed by the producer) BS EN 9300-013:2013EN 9300-013:2013 (E) 11 6.16 Manual edition of Descriptive Information (by the administra