1、BRITISH STANDARDBS EN 14449:2005Glass in building Laminated glass and laminated safety glass Evaluation of conformity/ProductstandardThe European Standard EN 14449:2005 has the status of a British StandardICS 81.040.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g5
2、4g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14449:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 February 2006 BSI 10 February 2006ISBN 0 580 46084 3Natio
3、nal forewordThis British Standard is the official English language version of EN 14449:2005.The UK participation in its preparation was entrusted by Technical Committee B/520, Glass and glazing in building, to Subcommittee B/520/1, Glass and glazing in building Basic and transformed glass products,
4、which has the responsibility to:A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the s
5、ection entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.
6、Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor re
7、lated international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 52, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the doc
8、ument was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14449May 2005ICS 81.040.20English versionGlass in building - Laminated glass and laminated safety glass -Evaluation of conformity/Product standardVerre dans la constructio
9、n - Verre feuillet et verre feuilletde scurit - Evaluation de la conformit/Norme de produitGlas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Konformittsbewertung/ProduktnormThis European Standard was approved by CEN on 3 March 2005.CEN members are bound to comply with the CEN/CENELEC Inte
10、rnal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.
11、This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are th
12、e national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.
13、EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14449:2005: EEN 14449:2005
14、(E) 2Contents Page Foreword. 31 Scope 42 Normative references . 43 Terms and definitions. 54 Requirements 64.1 Product description 64.2 Conformity with the definition of laminated glass and laminated safety glass . 64.3 Determination of the characteristics performances. 74.4 Durability 104.5 Dangero
15、us substances. 105 Evaluation of conformity 115.1 General. 115.2 Initial type testing of the product (see 5.1, b) 115.3 Factory production control (FPC) and inspection of samples in accordance with a prescribed test plan (see 5.1, a1 and 2) 135.4 Initial inspection of factory and of factory producti
16、on control (see 5.1, a3). 135.5 Continuous surveillance and assessment of the factory production control (see 5.1, a3) 146 Marking and/or labelling. 156.1 General. 156.2 Product marking 156.3 Product characteristics 156.4 “Characteristics/performance identification paper” . 15Annex A (normative) Fac
17、tory production control 16Annex B (informative) Tests for ensuring conformity 28Annex C (informative) Laminated safety glass: Mechanical resistance tests 33Annex D (informative) Criteria for deciding if a change within an assembly requires a new initial type test. 36Annex E (informative) Provisions
18、for voluntary involvement of third party(ies) . 38Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive. 39Bibliography . 52EN 14449:2005 (E)3Foreword This European Standard (EN 14449:2005) has been prepared by Technical Committee CE
19、N/TC 129 “Glass in building”, the secretariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at th
20、e latest by January 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral par
21、t of this document. No existing European Standard is superseded. This European Standard stands alone. This European Standard contains other aspects of importance of trade. This European Standard includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organi
22、zations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slo
23、venia, Spain, Sweden, Switzerland and United Kingdom. EN 14449:2005 (E)41 Scope This European Standard covers the evaluation of conformity and the factory production control of laminated glass and laminated safety glass for use in buildings. NOTE 1 This also includes requirements subject to regulati
24、on. NOTE 2 For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, onl
25、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 410, Glass in building - Determination of luminous a
26、nd solar characteristics of glazing EN 572-1, Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties EN 673, Glass in building Determination of thermal transmittance (U value) Calculation methodEN 1063, Glass in building - Sec
27、urity glazing - Testing and classification of resistance against bullet attack EN 1748-1-1, Glass in building - Special basic products - Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties EN 1748-2-1, Glass in building - Special basic products - Glass ceramics
28、 - Part 2-1: Definition and general physical and mechanical properties EN 1863-1, Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description EN 12150-1, Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and descripti
29、on EN 12337-1, Glass in building - Chemically strengthened soda lime silicate glass Part 1: Definition and description EN 12600, Glass in building - Pendulum test - Impact test method and classification for flat glass EN 12758, Glass in building - Glazing and airborne sound insulation - Product desc
30、riptions and determination of properties EN 12898, Glass in building - Determination of the emissivityEN 13024-1, Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description EN 13501-1, Fire classification of construction products and building elements - Pa
31、rt 1: Classification using test data from reaction to fire testsEN 14449:2005 (E)5EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation servicesprEN 13501-5, Fire classification of construc
32、tion products and building elements - Part 5: Classification using test data from external fire exposure to roof testsEN 13541, Glass in building - Security glazing - Testing and classification of resistance against explosion pressureEN 14178-1, Glass in building Basic alkaline earth silicate glass
33、products - Part 1: Float glassprEN 14179-1, Glass in building - Heat soaked thermally toughened soda lime silicate safety glass Part 1: Definition and descriptionprEN 14321-1, Glass in building Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description EN ISO 12543
34、-1:1998, Glass in building Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998) EN ISO 12543-2:1998, Glass in building Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998) EN ISO 12543-3:1998,
35、 Glass in building Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998) EN ISO 12543-4:1998, Glass in building Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998) EN ISO 12543-5:1998, Glass in building Laminated glass
36、 and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998) EN ISO 12543-6:1998, Glass in building Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998)3 Terms and definitions For the purposes of this European Standard, the terms and definition
37、s given in EN ISO 12543:1998 Parts 1, 2, 3, 4, 5 and 6 and the following apply. 3.1 initial type testing determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardised, tabulated or general accep
38、ted values, standardised or recognised calculation methods, test reports when made available, ), in accordance with this European Standard that demonstrates compliance with this European Standard 3.2 test report document that covers the results of tests undertaken on a representative sample of the p
39、roduct from production or on a prototype design of the product 3.3 product description document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a product that complies with the standard. It includes specific reference(s) to characteristics that are modifi
40、ed by the production process 3.4 significant change variation in performance beyond the permitted tolerance for the characteristic EN 14449:2005 (E)64 Requirements 4.1 Product description For conformity purposes, the laminated/laminated safety glass manufacturer1is responsible for the preparation an
41、d maintenance of a product description. This description shall describe the product and/or product families. Disclosure of the product description shall be at the discretion of the laminated/laminated safety glass manufacturer or his agent except in the case of regulatory requirements. The descripti
42、on shall contain at least a normative part. The description may also contain an informative part, when the manufacturer foresees further development of the product. The normative part of the description shall contain the following minimum information: A reference to EN ISO 12543 Parts 1 to 6 and all
43、 other standards with which the manufacturer claims compliance; Component parts: Glass types and thicknesses (see 4.3.1.2), Plastics glazing sheet materials types and thicknesses, Interlayer types and thicknesses; The order of stacking of the components; Lamination process, e.g. folio, cast-in-place
44、, etc.; Coatings if present and their position relative to an interlayer.The interlayers may be listed either in full, i.e. chemical composition, or by a manufacturers code. The definition of product families shall be consistent with the normative part of the product description.The substitution of
45、materials and/or components shall maintain the conformity with the product description. The substituting materials and/or components can be added to the product family and also the product description when compliance has been demonstrated. 4.2 Conformity with the definition of laminated glass and la
46、minated safety glass 4.2.1 General Products shall conform with the manufacturers product description and fulfil the definition and requirements of laminated glass or laminated safety glass (see 4.2.2 and 4.2.3). 4.2.2 Conformity with definition of laminated glass Products shall fulfil the definition
47、 and requirements for laminated glass as defined in EN ISO 12543-3. 1The terms manufacturer and producer are understood as being synonyms (see CPD working document NB-CPD/02/019 issued 24 April 2002 page 1) EN 14449:2005 (E)74.2.3 Conformity with definition of laminated safety glass Products shall f
48、ulfil the definition and requirements for laminated safety glass as defined in EN ISO 12543-2. 4.3 Determination of the characteristics performances 4.3.1 Characteristics of laminated glass and laminated safety glass 4.3.1.1 General The characteristics of laminated glass and laminated safety glass a
49、re those of the glass panes used as components (see 4.3.1.2). 4.3.1.2 Characteristics of the glass panes used as components for the production of laminated and laminated safety glass The glass types given in Table 1 can be used for the manufacture of laminated glass and laminated safety glass. Table 1 - Glass types used as components for the production of laminated glass and laminated safety glass Glass type Reference Basic soda lime silicate glass products Special basic glass products: - Borosilicate glasses - Glass
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1