EN 14450-2005 en Secure storage units - Requirements classification and methods of test for resistance to burglary - Secure safe cabinets《安全存储装置 防盗要求 分类和试验方法 保险柜》.pdf

1、BRITISH STANDARD BS EN 14450:2005 Secure storage units Requirements, classification and methods of test for resistance to burglary Secure safe cabinets The European Standard EN 14450:2005 has the status of a British Standard ICS 13.310 BS EN 14450:2005 This British Standard was published under the a

2、uthority of the Standards Policy and Strategy Committee on 18 April 2005 BSI 18 April 2005 ISBN 0 580 45856 3 National foreword This British Standard is the official English language version of EN 14450:2005. The UK participation in its preparation was entrusted to Technical Committee GW/2, Safes, w

3、hich has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the se

4、ction entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

5、 Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor r

6、elated international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 18, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the

7、 document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN14450 March2005 ICS13.310 Englishversion SecurestorageunitsRequirements,classificationandmethods oftestforresistancetoburglarySecuresafecabinets Unitsdestockageenlieu

8、xsrsPrescriptions, classificationetmthodesdetestpourlaresistance leffractionCompartimentdescurit WertbehltnisseAnforderungen,Klassifizierungund MethodenzurPrfungdesWiderstandesgegen EinbruchdiebstahlSicherheitsschrnke ThisEuropeanStandardwasapprovedbyCENon23September2004. CENmembersareboundtocomplyw

9、iththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStan

10、dardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRe

11、public,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRN

12、ORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN14450:2005:EEN 14450:2005 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope. 5 2 Normative references 5 3 Terms and definitions 5 4 Class

13、ification and requirements 6 5 Technical Documentation . 7 6 Test specimen 8 7 Tool attack test. 8 8 Anchoring strength test 13 9 Test report 13 10 Marking . 14 Annex A (normative). 15 Bibliography 18 EN 14450:2005 (E) 3 Foreword This document (EN 14450:2004) has been prepared by the Technical Commi

14、ttee CEN /TC 263 “Secure storage of cash, valuables and data media“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2005, and conflicting nation

15、al standards shall be withdrawn at the latest by September 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fran

16、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14450:2005 (E) 4 Introduction Tests are made and the results used to classify resistance to burgla

17、ry. The resulting resistance classification may be used for designing security systems with the provision that, depending on the criminal, the conditions at the place of the crime and the availability of tools, considerably longer times are likely to occur in real burglary attacks than in a test. Th

18、ere is no requirement under this standard to test for resistance to fraudulent access. The standard covers products meant for purposes where the security resistance required is less than that of EN 1143-1. Manual tests are included whose results and repeatability is dependent on the skill of the tes

19、ting team. EN 14450:2005 (E) 5 1 Scope This document establishes the basis for testing and classifying secure safe cabinets. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For und

20、ated references, the latest edition of the referenced document (including any amendments) applies. EN 1300, Secure storage units Classification for high security locks according to their resistance to unauthorised opening 3 Terms and definitions For the purpose of this document, the following terms

21、and definitions apply. 3.1 secure safe cabinet storage unit which protects its content against burglary and when closed has at least one internal side 1 m length. The interior of a secure safe cabinet is accessed through a lockable door or lid 3.2 free-standing unit secure safe cabinet whose protect

22、ion against burglary depends only upon the materials and construction of its primary manufacture and not upon materials added or attached during installation 3.3 wall unit secure safe cabinet for installation into a wall and whose protection against burglary is partly dependent upon the wall(s) and

23、the materials added during installation 3.4 floor unit secure safe cabinet for installation into a floor and whose protection against burglary is partly dependent upon materials added during installation 3.5 working time time spent during testing during which one or more tools are used to create a c

24、hange in the test specimen 3.6 gross time time from when a test is started to when the test is complete or abandoned 3.7 encasement material added at installation to protect and anchor wall units and floor units 3.8 tool point, TP numerical value assigned to test tool 3.9 security units, SU numerica

25、l value expressing resistance against burglary attack EN 14450:2005 (E) 6 4 Classification and requirements 4.1 Classification Secure safe cabinets are classified to a resistance level according to Table 1. Table 1 Requirements for classification of security safe cabinets S1 S2Minimum resistance for

26、 access 2,00 SU 5,00 SU to the interiorLimit to number and type of 40 TP 60 TP tools used for testing Minimum strength 20 kN 30 kN per anchoring hole Minimum locking One lock to One lock to EN 1300 EN 1300 Gross attack time is limited as described in 7.2.4b. 4.2 Requirements 4.2.1 There shall be no

27、holes through the protection material other than those for locks, cables or anchoring. One cable hole is allowed, this shall not exceed 100 mm 2 . 4.2.2 A free-standing unit with a mass less than 1000 kg shall have at least two holes by which it can be anchored. These holes shall both be in the face

28、 through which it is to be anchored. The anchoring assembly for each anchoring hole shall sustain the minimum anchoring strength given in Table 1. 4.2.3 Secure safe cabinets shall be provided with operating and installation instructions, including instructions in respect of the locks and anchoring.

29、EN 14450:2005 (E) 7 5 Technical Documentation 5.1 General The technical documentation shall contain the following information: 5.2 Date of issue and the name of the manufacturer (or the name and status of the applicant requesting testing) shall be on each page; 5.3 Statement of the type and model nu

30、mber of secure safe cabinet, e.g. free-standing unit, wall unit or floor unit;. 5.4 Drawings of the test specimen and documents giving the following: a) weight, outside and inside dimensions, and the manufacturing tolerances of the dimensions; b) horizontal and vertical cross-sections; c) the quanti

31、ty, layout and features of locks, boltwork and relocking devices; d) the quantity, pitch and position of door bolts, their dimensions (e.g. cross-section), throw and engagement and their type (e.g. moving or fixed); e) the location and design of any local areas of special protection material; f) pur

32、pose, position and dimensions of any holes which pass through the protection material with details of any associated special protection; g) details of optional features, e.g. time locking and time delay locking; h) specification of the materials of construction. 5.5 Operating and installation instru

33、ctions, including instructions in respect of the locks and anchoring 5.6 In addition to 5.2, 5.3 and 5.4, for wall units and floor units the following information shall be provided: a) details of the recommended procedure for installation; b) drawing showing the recommended plane of door or lid in r

34、elation to the surface of the wall or floor into the unit is to be installed; c) details of encasement materials (see 3.7); d) recommendation for the proportion of the body to be encased and the thickness of the encasement; identification of any areas of the body which are not protected by material

35、added at installation;5.7List of all locks that may be fitted, giving the manufacturer and model number; 5.8 Details of any materials or device(s) intended to generate gas, smoke, soot, etc., in the event of physical attack or which could generate harmful substances during testing. EN 14450:2005 (E)

36、 8 6 Test specimen 6.1 The test specimen shall be a complete secure safe cabinet. Optional features which could decrease resistance time shall be present in the test specimen. Optional features which could increase resistance time shall either not be present or shall be made inoperative. 6.2 Wall un

37、its and floor units shall be encased according to the recommended procedure for installation (see 5.6.), using a supporting angle steel frame as illustrated in Figure A.1. 6.3 Cable entrance specified in the documentation shall be present in the test specimen. 6.4 When a range of different size secu

38、re safe cabinets is submitted for testing, the testing laboratory shall specify which sizes are to be tested. More than one size may be tested. 7 Tool attack test 7.1 Tool attacks 7.1.1 Tool list EN 14450:2005 (E) 9 Table 2 Permitted tools, coefficients (SU/min) and tool points (TP) Tool Maximum ove

39、rall Coefficient Tool Pointssize/amount/power SU/min TP Non-tools String, wire, adhesive tape 5 m 1 0 Chalk, marking pens 2 pieces 1 0 Measuring tape 3 m 1 0 Steel rule 300 mm 1 0 Self tapping screws 12 mm 1 0 Electric torch 1 torch 1 0 Hammer 0,2 kg 300 mm length 1 0Small tools Wedges made fof wood

40、 or plastic 200 mm by 80 mm by 40 mm 1 10 Cold chisel, flat or pointed 30 mm blade width, 250 mm length 1 10 Wood chisel 40 mm blade width, 350 mm length 1 10 Screwdriver 10 mm bit, 260 mm length 1 10 Pliers 200 mm length 1 10 Pinchers 240 mm length 1 10 Spanner 180 mm length 1 10 Allen key 120 mm l

41、ength 1 10 Crowbar 300 mm length 1 10 Hacksaw 330 mm blade length 1 10 Punch 250 mm length 1 10 Knife 120 mm length 1 10Large tools Hammer 1,5 kg head 400 mm length 2 10 Crowbar 710 mm length 2 30 Angle grinder 800 W input power, wheel diameter 125 mm 2 30(1,6mm thickness 2,5 mm) Screwdriver 16 mm b

42、it, 375 mm length 2 30 Electric drill without 500 W input power, percussion action HSS drill bit, diameter 10 mm 2 30250 mm length Additional tool accessories Additional hacksaw blade 330 mm blade length 0 10 Additional HSS drill bit 10 mm diameter, 250 mm length 0 10 Additional abrasive wheel or di

43、sc 125 mm diameter (no diamond disc) (1.6 mm thickness 2,5 mm) 0 10EN 14450:2005 (E) 10 7.1.2 Tool attack procedure 7.1.2.1 Free-standing units shall be anchored according to the recommended procedure for installation (see 5.5). 7.1.2.2 Tool attack tests are timed and shall use only the tools listed

44、 in Table 2. The number and types of tool which can used in any one test is limited according to the tool unit values specified in Table 1, e.g. to a maximum of 40 TP for a level S 1 secure safe cabinet and to a maximum of 60 TP for a level S 2 secure safe cabinet. Table 2 gives the tool points for

45、each permitted tool. 7.1.2.3 The tools and programme of attack used during testing shall be those most likely, in the opinion of the testing team, to result in the lowest security units. 7.1.2.4 The testing team shall comprise: a) a team leader responsible for the conduct of the test and whose funct

46、ion is to plan, direct and supervise testing; b) time keeper(s) responsible for both timekeeping and the compiling of a test record; c) testing operatives whose function is to carry out the tool attacks against the test specimen as directed by the test leader. NOTE 1 The team leader may be the timek

47、eeper. NOTE 2 Testing should be carried out according to the current state of knowledge. To ensure maximum consistency of test results, testing laboratories shall have EN ISO/IEC 17 025 accreditation and shall participate in audits, co-operative tests and experience-sharing events and other relevant

48、 training. 7.1.2.5 In any one test only one test operative is to perform work on the test specimen. A second operative is allowed to ensure safe working conditions, but is not allowed to work simultaneously on the test specimen. 7.1.2.6 Prior to starting a test, the team leader and the test operative shall agree a plan for the test and shall bring together near the test specimen all of the tools to be used. They shall ensure these tools are ready for immediate and effective use. Set-up times are included in the tool points and shall no