EN 14519-2005 en Solid softwood panelling and cladding - Machined profiles with tongue and groove《实心软木板和涂覆层 带舌状物和凹槽的机械轮廓》.pdf

1、BRITISH STANDARDBS EN 14519:2005Solid softwood panelling and cladding Softwood machined profiles with tongue and grooveThe European Standard EN 14519:2005 has the status of a British StandardICS 79.080g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g4

2、0g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14519:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 15 February 2006 BSI 15 February 2006ISBN 0 580 47679 0National forewordThis

3、British Standard is the official English language version of EN 14519:2005.The UK participation in its preparation was entrusted to Technical Committee B/543, Round and sawn timber, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to i

4、ts secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic

5、Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understa

6、nd the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front

7、 cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14519December 20

8、05ICS 79.080English VersionSolid softwood panelling and cladding - Machined profiles withtongue and grooveLambris et bardages en bois massif rsineux - Profilsusins avec rainure et languetteInnen- und Auenbekleidungen aus massivem Nadelholz -Profilholz mit Nut und FederThis European Standard was appr

9、oved by CEN on 21 November 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

10、standards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified

11、to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No

12、rway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any

13、 means reservedworldwide for CEN national Members.Ref. No. EN 14519:2005: EEN 14519:2005 (E) 2 Contents Page Foreword 3 Introduction4 1 Scope .5 2 Normative references .5 3 Terms and definitions.6 4 Symbols and abbreviations6 5 Requirements 6 5.1 General 6 5.2 Appearance and finishing 7 5.2.1 Genera

14、l 7 5.2.2 Grading classes 7 5.2.3 Free grade11 5.3 Moisture content .11 5.4 Geometrical characteristics .11 5.4.1 General 11 5.4.2 Profiles.11 5.4.3 Dimensions and tolerances11 5.5 Technical specifications.14 6 Sampling14 7 Designation .14 Annex A (normative) Principles for the classification of the

15、 free class.16 Annex B (informative) Examples of dimensions17 Annex C (informative) Sampling in case of dispute.20 Bibliography.21 EN 14519:2005 (E) 3 Foreword This European Standard (EN 14519:2005) has been prepared by Technical Committee CEN/TC 175 “Round and sawn timber”, the secretariat of which

16、 is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006 This standard is one of a series of s

17、tandards concerning solid wood panelling and wood flooring (including parquet). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia

18、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14519:2005 (E) 4 Introduction In this standard the characteristics of solid softwoo

19、d panelling and cladding are described on the basis of individual elements. EN 14519:2005 (E) 5 1 Scope This European Standard specifies the characteristics of solid wood panelling and cladding with tongue and groove machined from the following most common European species of softwood: spruce/fir, p

20、ine, larch, European Douglas Fir and maritime pine. Products are intended for interior or exterior use. NOTE Products sold in the European Economic Area should comply with prEN 14915. 2 Normative references The following referenced documents are indispensable for the application of this European Sta

21、ndard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 844-3:1995, Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber EN 844-4:1997, Round and sawn timb

22、er Terminology Part 4: Terms relating to structure content EN 844-5:1997, Round and sawn timber Terminology Part 5: Terms relating to dimensions of round timber EN 844-6:1997, Round and sawn timber Terminology Part 6: Terms relating to dimensions of sawn timber EN 844-7:1997, Round and sawn timber T

23、erminology Part 7: Terms relating to anatomical structure of timber EN 844-8:1997, Round and sawn timber Terminology Part 8: Terms relating to features of round timber EN 844-9:1997, Round and sawn timber Terminology Part 9: Terms relating to features of sawn timber EN 844-10:1998, Round and sawn ti

24、mber Terminology Part 10: Terms relating to stain and fungal attack EN 844-11: Round and sawn timber Terminology Part 11: Terms relating to degrade by insects EN 844-12:2000, Round and sawn timber - Terminology - Part 12: Additional terms and general index EN 1309-1:1997, Round and sawn timber Metho

25、d of measurement of dimensions Part 1: Sawn timber EN 1310:1997, Round and sawn timber - Method of measurement of features EN 13183-1, Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method EN 13183-2, Moisture content of a piece of sawn timber - Part 2: Estimation by

26、electrical resistance method EN 13647, Wood and parquet flooring and wood panelling and cladding Determination of geometrical characteristics EN 13756:2002, Wood flooring Terminology EN 14519:2005 (E) 6 3 Terms and definitions For the purposes of this European Standard, the terms and definitions giv

27、en in EN 13756:2002, EN 844-3:1995, EN 844-4 to EN 844-9:1997, EN 844-10 to EN 844-11:1998, EN 844-12:2000 and EN 1309-1:1997 and the following apply. 3.1 panelling and cladding with tongue and groove tongued and grooved boards of solid wood which have been machined on the face and two edges and hav

28、e been finished hit and/or missed on the back. The ends of the boards may be endmatched with tongue and groove 3.2 panelling rigid or semi-rigid elements of solid wood mainly for interior use 3.3 cladding rigid or semi-rigid elements of solid wood mainly for exterior use 3.4 face visible surface of

29、an element NOTE includes edges and chamfers 4 Symbols and abbreviations Symbols and abbreviations used in this European Standard are given in Figure 1, in Tables 3 and 4 and Tables B.1, B.2, B.3 and B.4. 5 Requirements 5.1 General The softwood species shall be selected with regard to the appearance

30、expected, the suitability for the intended purpose and the general characteristics of the species itself. All requirements apply at the time of production, unless the manufacturer states otherwise. EN 14519:2005 (E) 7 5.2 Appearance and finishing 5.2.1 General Grading applies to the face only, unles

31、s otherwise specified. Machining requirements are covered in 5.4.4 and apply to all grades of all species. The measurement of features shall be in accordance with EN 1310. Concerning knots the general method given in 4.1.1 of EN 1310:1997 applies. The boards may be finished with surface coating. The

32、 grading shall be done before the coating. 5.2.2 Grading classes Grading and the features for spruce (Picea spp.) / fir (Abies spp.), scots pine (P.sylvestris), larch (Larix spp.) and European Douglas Fir (Pseudotsuga menziesii) are given in Table 1. Grading and the features for Maritime Pine (Pinus

33、 pinaster) are given in Table 2. Table 1 Grading classes of the wood species: Spruce (Picea spp.), fir (Abies spp.), scots pine (Pinus sylvestris), larch (Larix spp.) and European Douglas Fir (Pseudotsuga menziesii) Features a b c Grade A Grade B Knots Permitted: - black pin knots up to 5 mm if not

34、in clusters; - sound intergrown knots up to 10 % of width of the board + 30 mm; - partially intergrown knots, barkringed knots, splay knots and dead knots (not loose); Spruce/fir and larch: up to 10 % of width of the board +15 mm Scots pine and Douglas Fir: up to 10 % of width of the board +30 mm; -

35、 occasional small missing and damaged arris knots up to 20 % of the largest acceptable knot size provided coverage is not affected; - knot-plugs of the same wood species, up to the largest allowed knot size. Not permitted: - loose knots, knot-holes and unsound knots; Permitted: - black pin knots up

36、to 5 mm; - sound intergrown knots, partially intergrown knots, barkringed knots, splay knots, and dead knots up to 10 % of width of the board + 50 mm; - occasional loose knots, knot-holes and unsound knots up to 15 mm; - knot plugs of the same wood species. EN 14519:2005 (E) 8 Table 1 (continued) Fe

37、atures a b cGrade A Grade B Chipped Grain (machined damaged spots) Permitted with knots: up to 20 % of knot area; with other spots up to 20 % of the maximum knot size (one per m). Permitted with knots: up to 40 % of knot area; with other spots up to 40 % of the maximum knot size. Compression wood _

38、Deformation Permitted _ Permitted: subject to the tongue and groove providing a well-matched joint for the full length Resin pockets Permitted: - occasionally up to the size of 2 mm x 25 mm or equal in mm with a maximal width of 2 mm; - 1 resin pocket up to the size of 3 mm x 40 mm or equal in mm pe

39、r 1,5 m in length. Permitted: - up to the size of 2 mm x 35 mm or equal in mm unlimited ; - 3 resin pockets up to the width of 6 mm and a total length of 150 mm or equal in mm per 1,5 m in length. Fissures (shakes) Permitted: - hair fissures (barely visible); - end shakes not longer than width of th

40、e boards. end shakes: Boards with T+G at the end: Occasionally if not longer than of the width of the boards Not permitted: - fissures (shakes) through the full thickness with the exception of end shakes; - fissures extending from face to edge; - ring shakes; - fissures on the back side, continuing

41、for the full length of the board. Permitted: - face shakes going through (max. 1 mm wide) up to 300 mm in length; end shakes not longer than twice the width, occasionally permitted if boards have tongue and groove at the ends. Not permitted: - ring shakes. EN 14519:2005 (E) 9 Table 1 (continued) Fea

42、tures a b cGrade A Grade B Pith Permitted at 1/5 of length not more than 5 mm in width Permitted Colour face side: without any discolouration (discolouration on the reverse side is permitted) Permitted: slight discolouration as red and blue stain (discolouration on the reverse side is permitted) Fun

43、gal attack Not permitted Not permitted (exception: discolouration - see “colour“) Insect damage Not permitted Wane Permitted: on the reverse side if tongue and groove still exist intact. Permitted: at the reverse side if tongue and groove still exist intact on of length. Ingrown bark Permitted: occa

44、sional up to the size of 3 mm x 40 mm or equal in mm Permitted aNot more than 5 % of the quantity of the consignment is allowed to be in the next lower grade. Pieces not achieving the requirements of the B grade shall be classified into a free grade according to 5.2.3. bThe classification for appear

45、ance does not take into account features not visible when elements are assembled (e.g. chips or small loose knots on the tongue, local lack of the width on the tongue). cThe face comprises the whole visible surface of the strip when assembled. It therefore extends to the edges and in particular to t

46、he chamfers. Table 2 Grading classes : Maritime Pine (Pinus pinaster) Featuresa b c Grade 0 (SN)d Grade A (PN)d Grade B (NO)d Knots Permitted: knots 2 mm if not grouped together - Not permitted: other knots and loose knots. Permitted: sound and intergrown knots even slightly checked with a diameter

47、35 mm but not grouped together; black knots (except loose knots) or having lack of material on the face of a diameter 15 mm; Not permitted: loose knots, unsound knots, knots over limits permitted Permitted: knots without limitation in diameter; Not permitted: loose knots, unsound knots EN 14519:2005

48、 (E) 10 Table 2 (continued) Featuresa b c Grade 0 (SN)d Grade A (PN)d Grade B (NO)d Chipped grain (damage spots) Not permitted Permitted: with knots up to 20 % of knot area with other places up to 20 % of the maximum knot size (per meter). Permitted: with knots up to 40 % of knot area with other spo

49、ts up to 40 % of the maximum knot size. Compression wood Permitted Deformation Permitted: subject to the tongue and groove providing a well-matched joint on the full length Resin pockets Permitted: L 10 mm Permitted: L 70 mm Permitted: if not throughout the full thickness L: no limitation Fissures (Shakes) Not permitted Permitted: occasional, not traversing Pith Permitted:L 10 mm Permitted: L 70 mm Permitted: if not