EN 14607-6-2004 en Space engineering - Mechnical - Part 6 Pryotechnics《航天工程 机械 第6部分 烟火制造》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 14607-6:2004 Space engineering Mechanical Part 6: Pyrotechnics The European Standard EN 14607-6:2004 has the status of a British Standard ICS 49.140 BS EN 14607-6:2004 This British Standard was published under the authority of the Standards Policy and Strategy

2、 Committee on 19 April 2005 BSI 19 April 2005 ISBN 0 580 45751 6 National foreword This British Standard is the official English language version of EN 14607-6:2004. The UK participation in its preparation was entrusted to Technical Committee ACE/68, Space systems and operations, which has the respo

3、nsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “In

4、ternational Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a

5、 British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internation

6、al and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments is

7、sued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14607-6 August 2004 ICS 49.140 English version Space engineering - Mechnical - Part 6: Pryotechnics Ingnierie spatiale - Mcanique - Partie 6: Pyrotechnie Raumfahrttechnik - Mechanik - Teil 6: Pyrotechn

8、ik This European Standard was approved by CEN on 27 June 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref

9、erences concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member

10、into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

11、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All ri

12、ghts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14607-6:2004: EEN 14607-6:2004 (E) 2 Contents page Foreword .4 1 Scope5 2 Normative references5 3 Terms, definitions and abbreviated terms6 3.1 Terms and definitions .6 3.2 Abbreviated terms.7

13、4 Requirements.10 4.1 General .10 4.1.1 Overview.10 4.1.2 Application .10 4.1.3 Stability of properties10 4.1.4 Subsystem performance 10 4.1.5 Response time .10 4.2 Mission .10 4.3 Functionality 11 4.4 Constraints.11 4.4.1 Survival and operational conditions .11 4.4.2 Actuators and components11 4.4.

14、3 Mechanical constraints.12 4.4.4 Electrical constraints 12 4.5 Interface13 4.5.1 Functional 13 4.5.2 Internal13 4.5.3 External 13 4.6 Design.13 4.6.1 Prevention of unintentional function.13 4.6.2 Protection.14 4.6.3 Monitoring 14 4.6.4 Avoidance of single-point failures.14 4.6.5 Mechanical design.1

15、4 4.6.6 Electrical design15 4.6.7 Thermal design 17 4.6.8 Specific elements 17 4.7 Verification .21 4.7.1 General .21 4.7.2 Methods21 4.7.3 Essential confirmation21 4.7.4 Routing tests21 4.7.5 End-to-end tests 21 4.7.6 Operators .21 4.7.7 Subsystem testing.21 4.8 Production and manufacturing 21 4.8.

16、1 Elements.21 4.8.2 Transport and handling 22 4.8.3 Facilities .22 4.8.4 Electrostatic charge 22 4.8.5 Pyrotechnics installation, test and replacement22 4.8.6 Special-purpose aids 22 4.8.7 Pyrotechnics hardware tracking23 4.9 In-service23 4.9.1 Launch facilities 23 EN 14607-6:2004 (E) 3 4.9.2 Inform

17、ation feedback 23 4.9.3 Launch site procedures 23 4.9.4 Commands .24 4.9.5 Monitoring 24 4.9.6 Recovery.24 4.9.7 Disposal of flight equipment 24 4.9.8 Final activities24 4.10 Data exchange .24 4.10.1 General .24 4.10.2 Assembly, integration and verification records.25 4.11 Product assurance 25 4.11.

18、1 General .25 4.11.2 Design and verification .25 4.11.3 Dependability .25 4.11.4 Safety 26 4.11.5 Procurement.26 4.11.6 Assembly, integration and testing.27 4.11.7 Qualification.27 4.11.8 Acceptance.29 4.11.9 Post acceptance activities30 4.11.10 Control of pyrotechnics hardware.31 4.12 Deliverables3

19、1 4.12.1 General .31 4.12.2 Documentation.31 4.13 Use of the standard to define project requirements32 Bibliography33 Figures Figure 1 Typical pyrotechnic chain and associated items . 9 Tables Table 1 - Document requirements for pyrotechnic subsystem. 32 EN 14607-6:2004 (E) 4 Foreword This document

20、(EN 14607-6:2004) has been prepared by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. It

21、is based on a previous version 1 ) originally prepared by the ECSS Mechanical Engineering Standard Working Group, reviewed by the ECSS Technical Panel and approved by the ECSS Steering Board. The European Cooperation for Space Standardization (ECSS) is a cooperative effort of the European Space Agen

22、cy, National Space Agencies and European industry associations for the purpose of developing and maintaining common standards. This document is one of the series of space standards intended to be applied together for the management, engineering and product assurance in space projects and application

23、s. Requirements in this document are defined in terms of what shall be accomplished, rather than in terms of how to organize and perform the necessary work. This allows existing organizational structures and methods to be applied where they are effective, and for the structures and methods to evolve

24、 as necessary without rewriting the standards. EN 14607 Space engineering - Mechanical is published in 8 Parts: Part 1: Thermal control Part 2: Structural Part 3: Mechanisms Part 4: ECLS Part 5: Propulsion Part 5.1: Liquid and electric propulsion for spacecraft Part 5.2: Solid propulsion for spacecr

25、aft, solid and liquid propulsion for launchers Part 6: Pyrotechnics Part 7: Mechanical parts Part 8: Materials According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, C

26、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1 ) ECSS-E-30 Part 6A EN 14607-6:2004 (E) 5 1 Scope EN

27、14607 Part 6 of Space engineering - Mechanical defines the requirements for the discipline of pyrotechnics engineering. This part defines the standards to be applied for the use of pyrotechnics on all spacecraft and other space products including launch vehicles. It addresses the aspects of design,

28、analysis, verification, manufacturing, operations and safety. As any pyrotechnic item used for flight can function only once, it can never be fully tested before its crucial mission operation. The required confidence can only be established indirectly by the testing of identical items. Test results

29、and theoretical justification are essential for demonstration of fulfilment of the requirements. The requirement for repeatability shows that product assurance plays a crucial role in support of technical aspects. The failure or unintentional operation of a pyrotechnic item can be catastrophic for t

30、he whole mission and life threatening. Specific requirements can exist for the items associated with it. As all pyrotechnic functions are to be treated similarly, collective control needs to be applied in the manner of a subsystem. When viewed from the perspective of a specific project context, the

31、requirements defined in this document should be tailored to match the genuine requirements of a particular profile and circumstances of a project. NOTE Tailoring is a process by which individual requirements of specifications, standards and related documents are evaluated, and made applicable to a s

32、pecific project by selection, and in some exceptional cases, modification of existing or addition of new requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated r

33、eferences, the latest edition of the referenced document (including any amendments) applies. EN 13290-1:1999, Space project management General requirements Part 1: Policy and principles. EN 13290-5:2001, Space project management General requirements Part 5: Configuration management EN 13291-1:1999,

34、Space product assurance General requirements Part 1: Policy and principles. EN 13291-2:2003, Space product assurance General requirements Part 2: Quality assurance. EN 13291-3:2003, Space product assurance General requirements Part 3: Materials, mechanical parts and processes. EN 13701:2001, Space s

35、ystems Glossary of terms. EN 14093:2002, Space project management Organization and conduct of reviews. EN 14160:2001, Space engineering Software. EN 14607-2:2004, Space engineering Mechanical Part 2: Structural. EN 14724:2003, Space project management Tailoring of space standards. EN 14824:2003, Spa

36、ce engineering Testing. EN ISO 14620-1:2002, Space systems Safety requirements Part 1: System safety (ISO 14620-1:2002). ECSS-E-10A, Space engineering System engineering. EN 14607-6:2004 (E) 6 ECSS-E-20A, Space engineering Electrical and electronic. ECSS-Q-30, Space product assurance Dependability.

37、ESA SCC 3401/052, Connectors, electrical, circular, bayonet coupling, scoop-proof, removable crimp contacts. ESA SCC 3401/056, Connectors, electrical, circular, triple-start sel-locking coupling, scoop-proof, removable crimp contacts. MIL-STD-1576 Issue 31/7/84, Electro-explosive Sub-system Safety R

38、equirements. ST/SG/AC 10/1 Rev. 7, UNO Transport of Dangerous Goods. References to sources of approved lists, procedures and processes can be found in the bibliography. 3 Terms, definitions and abbreviated terms 3.1 Terms and definitions For the purposes of this document, the terms and definitions g

39、iven in EN 13701:2001 and the following apply. 3.1.1 cartridge explosive device designed to produce pressure for performing a mechanical function, i.e. operating a cartridge actuated device such as a pin-puller or cable cutter NOTE 1 A cartridge is called an initiator if it is the first or only expl

40、osive element in an explosive chain. NOTE 2 Electrically actuated cartridges are EEDs. 3.1.2 charge quantity of explosive loaded in a cartridge, detonator, or separate container for use in a pyrotechnic device 3.1.3 detonator initiator for high order detonating explosives NOTE Detonators used in spa

41、ce vehicles are generally EEDs, i.e. electrically actuated. 3.1.4 electro-explosive device (EED) explosive initiator that is electrically actuated NOTE 1 The EED is the explosive element used to operate a cartridge actuated device, to initiate an explosive charge, or to ignite a deflagrating materia

42、l. NOTE 2 Detonators, initiators and cartridges when electrically actuated are EEDs. 3.1.5 initiator first element in an explosive chain that, upon receipt of the proper mechanical or electrical impulse, produces a deflagrating or detonating action NOTE 1 The deflagrating or detonating action is tra

43、nsmitted to the following elements in the chain. NOTE 2 Initiators can be mechanically actuated, percussion primers, or electrically actuated (EEDs). EN 14607-6:2004 (E) 7 3.1.6 lifetime period over which any of the subsystem properties are required to be within defined limits 3.1.7 pyrotechnic actu

44、ator mechanism that converts the products of explosion into useful mechanical work 3.1.8 pyrotechnic chain all the elements necessary to supply, operate, support, protect and monitor a pyrotechnic function NOTE 1 Software, support equipment, integration, test and launch site facilities and procedure

45、s are included in the pyrotechnic chain. NOTE 2 The schematic of a typical pyrotechnic chain is shown in Figure 1. 3.1.9 pyrotechnic component any discrete item containing explosive substance, that is permanently changed as a result of operation 3.1.10 pyrotechnic function any function that uses ene

46、rgy released from explosive substances for its mechanical operation 3.1.11 pyrotechnic subsystem collection of all the pyrotechnic chains on the spacecraft or launcher system, and any on-board computers, launch operation equipment, ground support and test equipment and all software associated with p

47、yrotechnic functions NOTE Pyrotechnic subsystem is referred to as “the subsystem” throughout this document. 3.1.12 secondary characteristic any characteristic, other than its primary function, affecting the capability of an item to meet requirements 3.1.13 sequential firing application of the firing

48、 pulses to redundant initiators separated in time 3.1.14 simultaneous firing application of the firing pulse to both redundant initiators at the same instant 3.1.15 sympathetic firing firing of the second of two redundant pyrotechnic devices due to the output of the first 3.2 Abbreviated terms The f

49、ollowing abbreviated terms are defined and used within this document. Abbreviation Meaning AIV assembly integration verification DPA destructive physical analysis EED electro-explosive device EGSE electrical ground support equipment EN 14607-6:2004 (E) 8 EMC electromagnetic compatibility ESD electrostatic discharge MGSE mechanical ground support equipment UNO United Nations Organisation TBI through-bulkhead initiator RF radio frequenc