EN 14964-2006 en Rigid underlays for discontinuous roofing - Definitions and characteristics《非连续屋顶盖法用硬质衬垫物 定义和特征》.pdf

1、BRITISH STANDARDBS EN 14964:2006Rigid underlays for discontinuous roofing Definitions and characteristicsThe European Standard EN 14964:2006 has the status of a British StandardICS 91.060.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g

2、51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14964:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2006ISBN 0 580 49538 8National forewordThis British Standard was pu

3、blished by BSI. It is the UK implementation of EN 14964:2006.The UK participation in its preparation was entrusted by Technical Committee B/542, Roofing and cladding products for discontinuous laying, to Subcommittee B/542/1, Slating and tiling.A list of organizations represented on B/542/1 can be o

4、btained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No.

5、Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14964October 2006ICS 91.060.20English VersionRigid underlays for discontinuous roofing - Definitions andcharacteristicsEcrans rigides de sous-toiture pour pose en discontinu -Dfinitions et caractristiquesUnterdeckplatten fr Dachdeckungen

6、 - Definitionen undEigenschaftenThis European Standard was approved by CEN on 28 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date

7、lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the respo

8、nsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland,

9、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-10

10、50 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14964:2006: EEN 14964:2006 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Product characteristics and tes

11、t methods7 4.1 General7 4.2 Dimensions and tolerances (dimensional variation) .7 4.3 Application-related characteristics8 4.3.1 Mechanical resistance.8 4.3.2 Reaction to fire.9 4.3.3 Water impermeability 10 4.3.4 Water vapour permeability10 4.3.5 Durability 10 4.3.6 Thermal resistance 11 4.3.7 Airbo

12、rne sound insulation 11 5 Evaluation of conformity.11 5.1 General11 5.2 Initial type testing 12 5.3 Factory production control (FPC) 12 5.3.1 General12 5.3.2 Frequency of testing .12 6 Marking, labelling and packaging 12 Annex A (normative) Rules for factory production control 14 Annex ZA (informati

13、ve) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive15 ZA.1 Scope and relevant characteristics .15 ZA.2 Procedure for the attestation of conformity of rigid underlays for discontinuous roofing.17 ZA.2.1 Systems of attestation of conformity 17 ZA.2

14、.2 EC Certificate and Declaration of conformity.20 ZA.3 CE conformity marking .21 Bibliography 24 EN 14964:2006 (E) 3 Foreword This document (EN 14964:2006) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinuous laying and products for wall cladding”, the secre

15、tariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by July 2008. This document has

16、been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard i

17、s a product specification for rigid underlays of the type defined in Clause 3 of this European Standard and commonly used in a number of applications for roofing used in buildings. Underlays of the type specified in this European Standard are deemed to be construction products in accordance with Art

18、icle 1 of the Construction Products Directive (CPD). The general test method standards referred to in this product specification fall within the scope of CEN/TC 128 unless otherwise stated in this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizati

19、ons of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia

20、, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14964:2006 (E) 4 Introduction Article 2 of the CPD requires that construction products be fit for intended use, that is to say that the products shall have the characteristics enabling the works incorporating such products to satisfy the

21、Essential Requirements referred to in Article 3 of the CPD. The harmonized characteristics specified by this European Standard are derived from Mandate M/122 “Roof coverings, rooflights, roof windows and ancillary products”. It contains also voluntary characteristics. Annex ZA indicates which charac

22、teristics of this European Standard are harmonized. The test methods referred to in this European Standard relate to the use of rigid underlays in roofing. EN 14964:2006 (E) 5 1 Scope This European Standard specifies the technical requirements for factory made flat or profiled sheets (wood-based, fi

23、bre cement flat sheets or corrugated bituminous sheets or other materials which can be characterised as one of these materials) that are used as underlays in pitched roof constructions with discontinuously laid coverings (e.g. tiles, slates). This European Standard also establishes methods of inspec

24、tion and testing as well as criteria for evaluation of conformity. This European Standard does not include rigid underlays which have a stiffening function or a load bearing function. 2 Normative references The following referenced documents are indispensable for the application of this document. Fo

25、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 300, Oriented Strand Boards (OSB) Definitions, classification and specifications EN 312, Particleboards Specifications EN 324-1, Wood-based

26、 panels Determination of dimensions of boards Part 1: Determination of thickness, width and length EN 324-2, Wood-based panels Determination of dimensions of boards Part 2: Determination of squareness and edge straightness EN 534:2006 Corrugated bitumen sheets Product specification and test methods

27、EN 622-2, Fibreboards Specifications Part 2: Requirements for hardboards EN 622-3, Fibreboards Specifications Part 3: Requirements for medium boards EN 622-4, Fibreboards Specifications Part 4: Requirements for softboards EN 622-5, Fibreboards Specifications Part 5: Requirements for dry process boar

28、ds (MDF) EN 636, Plywood Specifications EN 12467:2004, Fibre cement flat sheets Product specifications and test methods EN 12524:2000, Building materials and products Hygrothermal properties Tabulated design values EN 12664, Thermal performance of building materials and products Determination of the

29、rmal resistance by means of guarded hot plate and heat flow meter methods Dry and moist products of medium and low thermal resistance EN 13501-1:2002, Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN 13986:2004,

30、Wood-based panels for use in construction Characteristics, evaluation of conformity and marking EN 14279, Laminated Veneer Lumber (LVL) Definitions, classification and specifications EN 14964:2006 (E) 6 EN ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Par

31、t 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO 12572, Hygrothermal performance of building materials and

32、 products Determination of water vapour transmission properties (ISO 12572:2001) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 rigid underlay factory made flat or profiled sheets: wood-based panels, fibre cement sheets, corrugated bitumen s

33、heets or sheets of other materials. NOTE They are used as underlay to coverings of pitched roofs (e.g. tiles, slates). They can be laid overlapping, one sheet covering the other (OL) or interlocking, sheets side by side (IL) 3.1.1 wood-based panel solid wood panel, laminated veneer lumber (LVL), ply

34、wood, oriented strand board (OSB), resin-bonded particleboard, cement-bonded particleboard, fibreboard or wood fibre insulation board 3.1.2 fibre cement flat sheet sheets consisting essentially of cement or a calcium silicate formed by a chemical reaction of a siliceous and a calcareous material, re

35、inforced by organic and/or inorganic fibres. NOTE Fibre cement sheets can be pressed or un-pressed 3.1.3 corrugated bitumen sheet profiled sheet consisting of an intimate and homogeneous mixture of organic and/or inorganic fibres and bitumen. NOTE The surface may be natural coloured, spun-dyed, coat

36、ed, granulised or mineralised 3.2 sampling procedure used to draw or constitute a sample 3.3 sample sheet from which a test piece is taken 3.3.1 test piece part of the sample from which test specimens are taken 3.3.2 test specimen piece of accurate dimensions taken from the test piece EN 14964:2006

37、(E) 7 3.4 manufacturers declared value (MDV) value declared by the manufacturer accompanied by a declared tolerance 4 Product characteristics and test methods 4.1 General Rigid underlays based on wood, fibre cement or made of corrugated bitumen sheets have to meet the requirements as given in 4.3 an

38、d shall be tested accordingly. Rigid underlays made of other materials shall be grouped into one of the different materials (wood-based, fibre cement, corrugated bitumen sheets) and all tests shall be carried out according to the respective material group. Factory production control and verification

39、 of manufacturers stated values shall be carried out in accordance with Annex A. 4.2 Dimensions and tolerances (dimensional variation) The tolerances on dimensions of the products described in this European Standard are to be classified as follows: Type OL: rigid underlays laid overlapping; Type IL:

40、 rigid underlays laid interlocking. The tolerances for wood-based panels, fibre cement flat sheets and the corrugated bitumen sheets for type OL shall comply with the relevant applicable product standards as listed in Clause 2. Dimensions and tolerances of wood-based panels shall be determined in ac

41、cordance with EN 324-1 and EN 324-2. Dimensions and tolerances of fibre cement flat sheets shall be determined in accordance with EN 12467. Dimensions and tolerances of corrugated bitumen sheets shall be determined in accordance with EN 534. If a product is not based on one of these materials, the t

42、olerances for type OL are given in Table 1. For all products type IL the values of tolerances are given in Table 2. EN 14964:2006 (E) 8 Table 1 Type OL: Tolerances for rigid underlays laid overlapping Characteristic Tolerance Length 5 mm Width 1 % Straightness or squareness aDeviation: 4 mm/m length

43、 Flat products 1 mm Thickness Corrugated products 10 % Height of corrugations 1 % Pitch of corrugations 1 % aEither one may be declared. Table 2 Type IL: Tolerances for rigid underlays laid interlocking Characteristic Tolerance Length 5 mm Width 3 mm, max 1/3 of interlocking Thickness + 3 mm/ -1 mm

44、Squareness 2 mm/mStraightness 1,5 mm/m, max. 1/3 of interlocking 4.3 Application-related characteristics 4.3.1 Mechanical resistance 4.3.1.1 General The mechanical resistance of products used as rigid underlays (under the scope of this European Standard) is characterized through bending strength. 4.

45、3.1.2 Corrugated bitumen sheets The bending under downward load shall be determined in accordance with EN 534:2006, 7.2.1, with the following modifications: the distance between the tubes (Figure 8/key 2) shall be 400 mm instead of 620 mm; the distance between the three supports (Figure 8/key 5) sha

46、ll be modified in the proportion of 400/620: e.g. 210 mm instead of 325 mm, 200 mm instead of 310 mm; EN 14964:2006 (E) 9 instead of square tube (Figure 8/key 2), rectangular tubes of 100 mm width and 40 mm height shall be used; the minimum load for a deflection of 1/200 of a span of 400 mm shall be

47、 500 N/m2. 4.3.1.3 Fibre cement products The bending strength shall be determined in accordance with EN 12467. The product shall comply with at least category D as given in EN 12467:2004. Un-pressed sheets have to fulfil at least class 3, pressed sheets at least class 4 according to EN 12467:2004. 4

48、.3.1.4 Wood based panels The bending strength for wood based panels (required to be at least suitable for general purpose uses in humid conditions) shall be at least the limit value for the following boards: HB.H according to EN 622-2; MBL.H according to EN 622-3; MBH.H according to EN 622-3; SB.H a

49、ccording to EN 622-4; MDF.RWH according to EN 622-5; Laminated veneer lumber LVL/2 according to EN 14279; OSB/3 and OSB/4 according to EN 300; Particleboard P5 according to EN 312; Plywood C2 according to EN 636. 4.3.1.5 Other materials The mechanical resistance of products for use as rigid underlays shall be determined in accordance with the product standards of corrugated bitumen sheets, fibre cement sheets or wood based panels and all tests shall be carried out accordi