EN 15037-3-2009 en Precast concrete products - Beam-and-block floor systems - Part 3 Clay blocks (Incorporates Amendment A1 2011)《预制混凝土产品 梁 第3部分 粘土砌块块式地板系统》.pdf

1、BS EN15037-3:2009ICS 91.100.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPrecast concreteproducts Beam-and-block floor systemsPart 3: Clay blocks+A1:2011National forewordThis British Standard is the UK implementation of EN 15037-3:2009+A1:2011. It supersede

2、s BS EN 15037-3:2009, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“ tags.The UK participa

3、tion in its preparation was entrusted to Technical Committee B/524, Precast concrete products.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsib

4、le for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 15037-3:2009+A1:2011This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2009 BSI 2011Amendments/corrigenda issued sinc

5、e publicationDate Comments 31 May 2011 Implementation of CEN amendment A1 2011ISBN 978 0 580 71796 3EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15037-3:2009+A1 February 2011 ICS 91.100.30 Supersedes EN 15037-3:2009English Version Precast concrete products - Beam-and-block floor systems - Pa

6、rt 3: Clay blocks Produits prfabriqus en bton - Systmes de planchers poutrelles et entrevous - Partie 3: Entrevous en terre cuiteBetonfertigteile - Balkendecken mit Zwischenbauteilen - Teil 3: Keramische Zwischenbauteile This European Standard was approved by CEN on 25 January 2009 and includes Amen

7、dment 1 approved by CEN on 10 January 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

8、such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

9、own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, It

10、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-10

11、00 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15037-3:2009+A1:2011: EEN 15037-3:2009+A1:2011 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004 Common rules for precast concrete pro

12、ducts, at least for the first three digits. When a clause of EN 13369:2004 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword 4Introduction .61 Scope 72 Normative references 73 Terms and definitions .84

13、Requirements 114.1 Material requirements 114.2 Production requirements . 114.3 Finished product requirements . 114.3.1 Geometrical properties 114.3.2 Surface characteristics 144.3.3 Mechanical resistance 154.3.4 Resistance and reaction to fire . 164.3.5 Acoustic properties 164.3.6 Thermal properties

14、 . 174.3.7 Durability . 174.3.8 Other requirements. 175 Test methods . 185.1 Measuring of dimensions and surface characteristics 185.1.1 Block dimensions . 185.1.2 Width and depth of the nib 195.1.3 Thickness of the top flange of resisting and semi-resisting blocks . 205.1.4 Percentage of voids of t

15、he top flange of resisting blocks . 205.1.5 Flatness of the underside 205.1.6 Straightness of the nib edges . 205.1.7 Surface characteristics 205.2 Mechanical strength . 205.2.1 Resistance to concentrated loads 205.2.2 Bending strength 225.2.3 Longitudinal compression test for resisting and semi-res

16、isting clay blocks 245.2.4 Transverse testing of resisting and semi-resisting clay blocks 266 Evaluation of conformity 276.1 General . 276.2 Initial type tests . 286.3 Factory production control 286.3.1 General . 286.3.2 Finished product test . 287 Marking 288 Technical documentation 28Annex A (norm

17、ative) Sampling for initial type testing and for independent testing of consignments 29A.1 General . 29A.2 Sampling procedure . 29BS EN 15037-3:2009+A1:2011EN 15037-3:2009+A1:2011 (E) 3 A.2.1 Random sampling . 29A.2.2 Representative sampling 29A.2.3 Dividing the sample . 30A.2.4 Number of blocks req

18、uired per test . 30Annex B (normative) Inspection schemes for clay blocks . 31Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 33ZA.1 Scope and relevant characteristics . 33ZA.2 Procedure for attestation of conformity of c

19、lay blocks for beam-and-block floor systems . 35ZA.2.1 System of attestation of conformity 35ZA.2.2 EC Certificate and Declaration of conformity . 35ZA.3 CE marking and labelling 36ZA.3.1 General . 36ZA.3.2 Simplified label 37ZA.3.3 Information to be provided with the CE marking . 38Bibliography 40B

20、S EN 15037-3:2009+A1:2011EN 15037-3:2009+A1:2011 (E) 4 Foreword This document (EN 15037-3:2009+A1:2011) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR. This document was examined by and agreed with a joint working party appo

21、inted by the Liaison Group CEN/TC 229 CEN/TC 250, particularly for its compatibility with structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflicting nationa

22、l standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Am

23、endment 1, approved by CEN on 2011-01-10. This document supersedes EN 15037-3:2009. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trad

24、e Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. European standard for beam-and-block floor system is made of 5 parts: EN 15037-1, Precast concrete products Beam-and-blo

25、ck floor systems Part 1: Beams; EN 15037-2, Precast concrete products Beam-and-block floor systems Part 2: Concrete blocks; EN 15037-3, Precast concrete products Beam-and-block floor systems Part 3: Clay blocks; !EN 15037-4“, Precast concrete products Beam-and-block floor systems Part 4: Polystyrene

26、 blocks; prEN 15037-5, Precast concrete products Beam-and-block floor systems Part 5: Lightweight blocks. This European Standard is one of a series of product standards for precast concrete products. For common aspects of concrete products, reference is made to EN 13369, from which also the relevant

27、 requirements of the EN 206-1 are taken. The references to EN 13369 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. !Eurocodes are taken as a common reference for design aspects. The installation of some structural precast concr

28、ete products is dealt with by EN 13670:2009 Execution of concrete structures. In all countries it can be accompanied by alternatives for national application.“ The program of standards for structural precast concrete products comprises the following standards, in some cases consisting on several par

29、ts: BS EN 15037-3:2009+A1:2011EN 15037-3:2009+A1:2011 (E) 5 EN 1168, Precast concrete products Hollow core slabs EN 12794, Precast concrete products Foundation piles EN 12843, Precast concrete products Masts and poles EN 13224, Precast concrete products Ribbed floor elements EN 13225, Precast concre

30、te products Linear structural elements EN 13693, Precast concrete products Special roof elements EN 13747, Precast concrete products Floor plates for floor systems EN 13978, Precast concrete products Precast concrete garages EN 14843, Precast concrete products Stairs EN 14844, Precast concrete produ

31、cts Box culverts EN 14991, Precast concrete products Foundation elements EN 14992, Precast concrete products Wall elements EN 15037-1, Precast concrete products Beam-and-block floor systems Part 1: Beams EN 15050, Precast concrete products Bridge elements EN 15258, Precast concrete products Retainin

32、g wall elements This European Standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1:2004 and EN 1992-1-2:2004). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design provisions

33、other than EN Eurocodes are used for mechanical strength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Eur

34、opean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and

35、United Kingdom. BS EN 15037-3:2009+A1:2011EN 15037-3:2009+A1:2011 (E) 6 Introduction The evaluation of conformity refers to the clay blocks which are supplied to the market and covers all the production operations carried out in the factory. For design rules, reference is made to EN 1992-1-1:2004. A

36、dditional complementary rules are provided where necessary. BS EN 15037-3:2009+A1:2011EN 15037-3:2009+A1:2011 (E) 7 1 Scope This European Standard deals with the requirements and the basic performance criteria for blocks made in clay, used in conjunction with precast concrete beams in compliance wit

37、h EN 15037-1, with or without cast-in-situ concrete for the construction of beam-and-block floor and roof systems. Examples of typology of floor and roof systems are given in Annex B of EN 15037-1:2008. 2 Normative references The following referenced documents are indispensable for the application o

38、f this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 771-1:2003, Specification for masonry units Part 1: Clay masonry units EN 772-3, Methods of test for masonry units Part

39、3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing EN 772-9, Methods of test for masonry units Part 9: Determination of volume and percentage of voids and net volume of clay calcium silicate masonry units by sand filling EN 772-13, Methods of test fo

40、r masonry units Part 13: Determination of net and gross dry density of masonry units (except for natural stone) EN 772-19, Methods of test for masonry units Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units EN 1745, Masonry and masonry products Methods

41、for determining design thermal values EN 12390-4:2000, Testing hardened concrete Part 4: Compressive strength Specification for testing machines EN 13369:2004, Common rules for precast concrete products !EN 13501-1“, Fire classification of construction products and building elements Part 1: Classifi

42、cation using data from reaction to fire tests EN 15037-1:2008, Precast concrete products Beam-and-block floor systems Part 1: Beams !deleted text“ EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO 717-2,

43、 Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation (ISO 717-2:1996) !EN ISO 10140-3, Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)“ !EN ISO 10140-5,

44、Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)“ BS EN 15037-3:2009+A1:2011EN 15037-3:2009+A1:2011 (E) 8 3 Terms and definitions For the purposes of this document, the following terms and definitions

45、apply. 3.1 low non-resisting or non-resisting block block with no mechanical function in the final floor system (designated LNR or NR) NOTE Its only mechanical function is that of formwork during the construction of the floor system. Floor systems built with !low non-resisting or non-resisting block

46、s“ always have a cast-in-situ structural topping. 3.2 semi-resisting block block participating in the transfer of loads to the beams (designated SR) NOTE In conjunction with a cast-in-situ concrete, it may contribute to the final strength of the system. However, its top flange alone cannot act as a

47、compression slab in the final floor system. Figure 1 Examples of semi-resisting clay blocks 3.3 resisting block block with the same functions as semi-resisting blocks but whose top flange can, under certain conditions, play a role as compression slab in the final floor system (designated RR) Figure

48、2 Example of resisting clay blocks 3.4 nib shape given to the block so that it will bear on the beam 3.5 longitudinal block block where the axis of the perforations are parallel to the beam BS EN 15037-3:2009+A1:2011EN 15037-3:2009+A1:2011 (E) 9 NOTE An example of a longitudinal block is given in Fi

49、gure 3. Key 1 web 6 depth of the nib 2 overall length 7 overall width 3 flange (top part of the block) 8 overall height 4 height to nib 9 direction of the beam 5 width of the nib Figure 3 Example of a longitudinal block NOTE The flange in the top part of the block may be partially opened. 3.6 transverse block block where the axis of the perforations are per