1、BS EN 15060:2006ICS 87.040,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPaints and varnishes Guide for theclassification andselection of coatingsystems for wood basedmaterials in furniturefor interior useThis British Standardwas published underthe authority o
2、f theStandards Policy andStrategy Committee on 31 BSI 2008ISBN 978 0 580 55270 0Amendments/corrigenda issued since publicationDate CommentsBS EN 15060:2006National forewordThis British Standard is the UK implementation of EN 15060-1:2006.The UK participation in its preparation was entrusted to Techn
3、icalCommittee STI/28, Paint systems for non-metallic substrates.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.C
4、ompliance with a British Standard cannot confer immunityfrom legal obligations.December 2008BS EN 15060:2006EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15060August 2006ICS 87.040English VersionPaints and varnishes - Guide for the classification and selectionof coating systems for wood based ma
5、terials in furniture forinterior usePeintures et vernis - Guide de classification et de slectiondes systmes de peinture pour matriaux base de boisdans le mobilier dintrieurBeschichtungsstoffe - Leitfaden fr die Einteilung undAuswahl von Beschichtungssystemen fr Holzmbel imInnenbereichThis European S
6、tandard was approved by CEN on 26 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning s
7、uch nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language a
8、nd notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net
9、herlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation i
10、n any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15060:2006: EBS EN 15060:2006EN 15060-1:2006 (E) 2 Contents Page Foreword4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Classification and designation.7 4.1 Wet properties of each co
11、at of the coating system .7 4.2 Details of build .8 4.3 Application system9 4.4 Drying and curing 10 4.5 Surface to be coated .12 4.6 Appearance 13 5 Properties of coating systems .14 6 Details to intended use and function.16 Annex A (Informative) Examples of completed tables.17 Bibliography 27 BS E
12、N 15060:2006EN 15060-1:2006 (E) 3 Tables Table 1 Wet properties of each coat of the coating system 7 Table 2 Details of build8 Table 3 Application system.9 Table 4 Drying and curing.10 Table 5 Surface to be coated and support 12 Table 6 Appearance .13 Table 7 Properties of coating systems 14 Table 8
13、 Details to intended use and function .16 Table A.1 Wet properties of each coat of the coating system 18 Table A.2 Details of build 19 Table A.3 Application system.20 Table A.4 Drying and curing .21 Table A.5 Surface to be coated and support.23 Table A.6 Appearance .23 Table A.7 Properties of coatin
14、g systems 24 Table A.8 Details to intended use and function26 BS EN 15060:2006EN 15060-1:2006 (E) 4 Foreword This document (EN 15060:2006) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the st
15、atus of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of
16、the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove
17、nia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15060:2006EN 15060-1:2006 (E) 5 Introduction The purpose of this guide is to provide a tool for both a furniture manufacturer and paint and varnish manufacturer, when trying to define the product needed by the furniture manufacturer and/or of
18、fered by the paint and varnish manufacturer. This guide is a working document to be completed jointly by a furniture manufacturer and his or her supplier and may be used in the following two ways: When used by a furniture manufacturer: The furniture manufacturer can define the coating system he or s
19、he needs, by defining what kind of furniture he or she makes, kind of surface to finish, etc. This is achieved by putting a cross in the table in clause 6 of this guide: details of intended use and function, i.e. he or she needs a paint to finish a working surface in the domestic furniture he or she
20、 manufactures. Then, the manufacturer can define the properties of the coating system he or she needs (e.g. resistance to cold liquids). Of course, he or she can be helped by the paint manufacturer in this definition. When defining the properties and their values, European Standards should be used,
21、but if they do not exist, another reference document can be used (i.e. International or National standards, etc). The surface to be coated has to be defined as in clause 4.5, as well as the appearance needed (see 4.6). The application system has to be defined (see 4.3) and the drying and curing proc
22、ess (see 4.4) that the furniture manufacturer intends to use for each of the coats. For this information, the paint and varnish manufacturer can recommend to the furniture manufacturer another application method, etc. With all this data, the paint and varnish manufacturer is able to provide the name
23、 of his or her products (for each coat of the coating system: primer, stain, undercoat, filler, and topcoat, if all are needed) and their wet properties. Those are the products that the paint and varnish manufacturer is offering to the furniture manufacture to satisfy what he or she needs. When used
24、 by a paint and varnish manufacturer: A paint and varnish manufacturer can offer a product to a furniture manufacturer by fulfilling this guide from the beginning: For Table 1, the paint and varnish manufacturer will start by writing the name and characteristics of their products and then will conti
25、nue with their performances and a description of the application systems, and so on, to end at the last point. This is useful information provided by a paint and varnish manufacturer to a furniture manufacturer: those products, when combined and applied on a surface as defined, make a coating system
26、 with those properties, suitable for this kind of furniture and this kind of surface, etc. BS EN 15060:2006EN 15060-1:2006 (E) 6 1 Scope This document provides guidance for the information to be provided by a furniture manufacturer to paint and varnish suppliers and the information to be provided by
27、 a paint and varnish supplier to furniture manufacturers, in order to assist in the selection of coating materials and coating systems for wood-based material in furniture for interior use. This standard should be a reference document to be used with the test methods and specifications of the differ
28、ent types of furniture. NOTE For the purpose of this guide, wood-based materials with modified surfaces are included in this document (laminates, etc.) 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi
29、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13721, Furniture Assessment of the surface reflectance EN 13722, Furniture Assessment of the surface gloss EN ISO 4618:2006, Paints and varnishes Terms and definitions (IS
30、O 4618:2006) 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN ISO 4618:2006 apply. BS EN 15060:2006EN 15060-1:2006 (E) 7 4 Classification and designation 4.1 Wet properties of each coat of the coating system Fill in the blanks with the adequat
31、e information, when appropriate. See examples in Annex A (informative). Table 1 Wet properties of each coat of the coating system COAT UNITaREFERENCE DOCUMENTbPRIMERc STAIN UNDERCOAT FILLER TOP COAT Name Additional componentd Chemical nature of bindere Chemical nature of solventsf Non volatile conte
32、nt - delivery - application Solvent content: - organic - “non” organic Flashpoint: Pot lifeViscosity - delivery - application aWhen applicable.bThe supplier or manufacturer has to indicate according to which standard, legislation or reference document in general, the results are given. cPrimer = e.g
33、. putty, barrier coat, hydroground. dInformation has to be given for every component of each coat. eFor example: nitrocellulose, unsaturated polyester, saturated polyester, alkyd resin, acrylic resin. fFor example: water, volatile organic compounds, reactive organic solvent, solvent free. BS EN 1506
34、0:2006EN 15060-1:2006 (E) 8 4.2 Details of build Fill in the blanks with the adequate information, when appropriate. See examples in Annex A (informative). Table 2 Details of build COAT UNITa REFERENCE DOCUMENTbPRIMERc STAIN UNDERCOAT FILLER TOP COAT Layer thickness (dry) Application rate (wet):daWh
35、en applicable.bThe supplier or manufacturer has to indicate according to which standard, legislation or reference document in general, the results are given. cPrimer = e.g. putty, barrier coat, hydrogrund. dTheoretical application rate. Theoretical consumption without overspray but with evaporating
36、solvent, determination by weight. BS EN 15060:2006EN 15060-1:2006 (E) 9 4.3 Application system Fill in the blanks with the adequate information, when appropriate. See examples in Annex A (informative). Table 3 Application system COAT PROCESSaPRIMER STAIN UNDERCOAT FILLER TOP COAT Flatting Roller coa
37、ting Curtain coating air spray airless airmx hot spraying electrostatic Spray coating others dipping vacum powder coating Others others aIf necessary, special conditions can be written in the adequate case. BS EN 15060:2006EN 15060-1:2006 (E) 10 4.4 Drying and curing Fill in the blanks with the adeq
38、uate information, when appropriate. See examples in Annex A (informative). Enter only those parameters that are relevant. Table 4 Drying and curing COAT Undercoat Top coat PROCESSaPrimer Stain First SecondbFiller First SecondbTemperature (C) Speed (m/s) Manipulation Ambient (23C 2C and 50%5% R.H.) D
39、rying time Application other coat Temperature (C) Speed (m/s) Blocking Jet dryer Drying time Application other coat Temperature (C) Speed (m/s) Blocking Vertical oven Drying time Application other coat Temperature (C) Speed (m/s) Blocking Trolleys Drying time Application other coat Temperature (C) S
40、peed (m/min) Accelerated (more than (23 2) C warm temperature (more than 25C 2C) Infrared Drying time Manipulation BS EN 15060:2006EN 15060-1:2006 (E) 11 COAT Undercoat Top coat PROCESSaPrimer Stain First SecondbFiller First SecondbApplication other coat (previous sanding) Temperature (C) Speed (m/m
41、in) Manipulation Others (to be indicated) Drying time Application other coat Number of lamps Power/lamp (W/cm) Low press lamps Speed (m/s) Number of lamps Power/lamp (W/cm) High press lamps Speed (m/s) Number of lamps Power/lamp (W/cm) Galio lamps Speed (m/s) UV Others (to be indicated) EBC Others (
42、to be indicated) aIf necessary, special conditions can be written in the adequate gap. To fulfil as many gaps as necessary for every coat. bTo indicate if the application is after sanding or wet on wet. BS EN 15060:2006EN 15060-1:2006 (E) 12 4.5 Surface to be coated Fill in the blanks with the adequ
43、ate information, when appropriate. See examples in Annex A (informative). Table 5 Surface to be coated and support - Type of wood or veneer - Type of foil or laminate. Details of surface to be coateda - Type of board (if directly coated). Substrate Board (support of surface to be coated) aEnter only
44、 the applicable terms in each case. Use as many terms as necessary. Choose generally among: Substrate of the surface to be coated (for veneer and laminated, normally): chipboard, MDF, hardboard, plywood, solid wood, other (specify); Type of wood or veneer (for solid wood, veneer and plywood): Wood s
45、pecies according to the annex; Type of foil or laminate: foil (finish, base), urea-laminated, melamine-laminated, low press laminated, high press laminated, PVC, ABS; Type of board (for chipboard, fibreboard and others): chipboard (multilayer, OSB, homogeneous,.), fiber board (MDF, hardboard, low de
46、nsity board,.). BS EN 15060:2006EN 15060-1:2006 (E) 13 4.6 Appearance Fill in the blanks with the adequate information, when appropriate. See examples in Annex A (informative). Table 6 Appearance BUILD GLOSSa PORES STAIN REFLECTANCEbclear brushed patina stained open pored limed tinted halfopen pored
47、 semitransparent opaque close pored transparent textured others free of pores in pores aIn accordance with EN 13722.b If required, in accordance with EN 13721.BS EN 15060:2006EN 15060-1:2006 (E) 14 5 Properties of coating systems Fill in the blanks with the adequate information, when appropriate. Se
48、e examples in Annex A (informative). Table 7 Properties of coating systems Properties Unit Value Reference documenta5.1- Adhesion 5.2.-Impact resistance 5.3.- Abrasion resistance 5.4.-Scratch resistance 5.5.- light resistance (colour fastness) 5.6.- Metal marking 5.7.- Blocking resistance 5.8.- Mar
49、resistance 5.9 Surface resistance to cold liquidsb5.9.1 Acetic acid (10%) 5.9.2 Acetic acid (4,4%) 5.9.3 Acetone 5.9.4 Ammonia solution (10%) 5.9.5 Blackcurrant juice 5.9.6 Citric acid (10%) 5.9.7 Cleansing agent 5.9.8 Coffee (4g / 1l water) 5.9.9 Disinfectant 5.9.10 Endorsing ink 5.9.11 Ethanol, non denatured (96%) 5.9.12 Ethanol, non denatur
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1