1、BRITISH STANDARDBS EN 15088:2005Aluminium and aluminium alloys Structural products for construction works Technical conditions for inspection and deliveryThe European Standard EN 15088:2005 has the status of a British StandardICS 77.150.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g
2、44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15088:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 25 January 2006 BSI 25 January 2006ISBN
3、 0 580 46933 6National forewordThis British Standard is the official English language version of EN 15088:2005.The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys, which has the responsibility to: A list of organizations represented on t
4、his committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using
5、 the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from
6、 legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Su
7、mmary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 29 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORM
8、E EUROPENNEEUROPISCHE NORMEN 15088December 2005ICS 77.150.10English VersionAluminium and aluminium alloys - Structural products forconstruction works - Technical conditions for inspection anddeliveryAluminium et alliages daluminium - Produits pourapplications de structure pour construction - Conditi
9、onstechniques de contrle et de livraisonAluminium und Aluminiumlegierungen - Erzeugnisse frTragwerksanwendungen - Technische LieferbedingungenThis European Standard was approved by CEN on 12 May 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condit
10、ions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three offi
11、cial versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Bel
12、gium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT
13、 EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15088:2005: EEN 15088:2005 (E) 2 Contents Page Foreword 3 Introduction
14、4 1 Scope .5 2 Normative references .5 3 Terms and definitions.7 4 Requirements 9 4.1 Ordering Information 9 4.2 Selection of alloy and temper 9 4.3 Product requirements.9 5 Evaluation of conformity 12 5.1 General 12 5.2 Testing .12 5.3 Factory production control (FPC)14 5.4 One-off products, protot
15、ypes and products produced in very small quantities16 6 Marking, labelling and packaging17 Annex A (normative) Fatigue testing and design of extruded, rolled or forged products 18 A.1 General 18 A.2 Fatigue testing of the constituent material (extruded, rolled or forged products).18 A.3 Test piece f
16、or fatigue testing .19 A.4 Design code.19 Annex B (normative) Bendability.20 B.1 General 20 B.2 Bendability classes.21 B.3 Assignment to standardized tempers of semi-finished products .22 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products D
17、irective CPD EU Directive 89/106/EEC24 ZA.1 Scope and relevant characteristics .24 ZA.2 Procedures for the attestation of conformity of structural metallic construction products .25 ZA.3 CE marking and labelling .27 Bibliography.29 EN 15088:2005 (E) 3 Foreword This document (EN 15088:2005) has been
18、prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting n
19、ational standards shall be withdrawn at the latest by June 2006. This document has been prepared under the mandate M 120 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Construction Products Directive CPD 89/106/EEC. For rela
20、tionship with EU Construction Products Directive CPD, see informative Annex ZA, which is an integral part of this document and which it becomes a harmonized European Standard. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 14 “General Support“ to prepare the fol
21、lowing standard : EN 15088 “Aluminium and aluminium alloys Structural products for construction works Technical conditions for inspection and delivery“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Euro
22、pean Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 15088:2005
23、 (E) 4 Introduction This European Standard is an “umbrella“ standard which gives the regulatory requirements to enable manufacturers or their agents to affix CE marking, in accordance with Directive 89/106/EEC (Construction Products Directive CPD) to products within the scope of this European Standa
24、rd. It is intended to be used in conjunction with other referenced material/ product standards (see Figure 1). A manufacturer who has no knowledge of its final destination may sell a product to a stockist. It is the responsibility of the manufacturer, that the product complies with the conditions of
25、 CE marking for the stated intended use included as part of the CE marking. If the stockist resells the product for another intended use or changes the product in a way, he in effect becomes a new manufacturer. Consequently, he becomes responsible for the appropriate CE marking of the product that h
26、e places on the market. Therefore, irrespective of current terminology in terms of regulatory marking there will only ever be two parties, the seller (the manufacturer) and the buyer (the purchaser). Products CE marked in accordance with this harmonized European Standard can be presumed to have the
27、performances stated with the CE marking. This does not replace the responsibility on the designer to ensure that the final structural product made of aluminium as a whole is correctly designed and its components meet the necessary performance values depending on the design, especially in view of fat
28、igue design. Figure 1 Relationship between standards EN 15088:2005 (E) 5 1 Scope This European Standard specifies requirements for semi-finished products and castings of aluminium and aluminium alloys for load-bearing structural construction works (Construction works covers building and civil engine
29、ering works). It also specifies requirements for evaluation of conformity and the test methods to be used. It does not apply to products after machining or joining operations (e.g. bolting, welding of elements), which can be found in other European Standards, e.g. prEN 1090-1. 2 Normative references
30、 The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 485-1, Aluminium and aluminium alloys Sheet,
31、strip and plate Part 1: Technical conditions for inspection and delivery. EN 485-2, Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical properties. EN 485-3, Aluminium and aluminium alloys Sheet, strip and plate Part 3: Tolerances on dimensions and form for hot-rolled products.
32、EN 485-4, Aluminium and aluminium alloys Sheet, strip and plate Part 4: Tolerances on shape and dimensions for cold-rolled products. EN 515, Aluminium and aluminium alloys - Wrought products - Temper designations. EN 573-3, Aluminium and aluminium alloys Chemical composition and form of wrought prod
33、ucts Part 3: Chemical composition. EN 586-1, Aluminium and aluminium alloys Forgings Part 1: Technical conditions for inspection and delivery. EN 586-2, Aluminium and aluminium alloys Forgings Part 2: Mechanical properties and additional property requirements. EN 586-3, Aluminium and aluminium alloy
34、s Forgings Part 3: Tolerances on dimensions and form. EN 754-1, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 1: Technical conditions for inspection and delivery. EN 754-2, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 2: Mechanical properties. EN 754-3, Aluminium
35、 and aluminium alloys Cold drawn rod/bar and tube Part 3: Round bars, tolerances on dimensions and form. EN 754-4, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 4: Square bars, tolerances on dimensions and form. EN 754-5, Aluminium and aluminium alloys Cold drawn rod/bar and tube P
36、art 5: Rectangular bars, tolerances on dimensions and form. EN 754-6, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 6: Hexagonal bars, tolerances on dimensions and form. EN 15088:2005 (E) 6 EN 754-7, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 7: Seamless tubes,
37、 tolerances on dimensions and form. EN 754-8, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 8: Porthole tubes, tolerances on dimensions and form. EN 755-1, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 1: Technical conditions for inspection and delivery. E
38、N 755-2, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 2: Mechanical properties. EN 755-3, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 3: Round bars, tolerances on dimensions and form. EN 755-4, Aluminium and aluminium alloys Extruded rod/bar, tu
39、be and profiles Part 4: Square bars, tolerances on dimensions and form. EN 755-5, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 5: Rectangular bars, tolerances on dimensions and form. EN 755-6, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 6: Hexag
40、onal bars, tolerances on dimensions and form. EN 755-7, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 7: Seamless tubes, tolerances on dimensions and form. EN 755-8, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 8: Porthole tubes, tolerances on dim
41、ensions and form. EN 755-9, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 9: Profiles, tolerances on dimensions and form. prEN 1090-3, Technical requirements for the execution of aluminium structures. EN 1301-1, Aluminium and aluminium alloys Drawn wire Part 1: Technical co
42、nditions for inspection and delivery. EN 1301-2, Aluminium and aluminium alloys Drawn wire Part 2: Mechanical properties. EN 1301-3, Aluminium and aluminium alloys Drawn wire Part 3: Tolerances on dimensions. EN 1386, Aluminium and aluminium alloys Tread plate Specifications. EN 1396, Aluminium and
43、aluminium alloys Coil coated sheet and strip for general applications Specifications. EN 1559-1, Founding Technical conditions of delivery Part 1: General. EN 1559-4, Founding Technical conditions of delivery Part 4: Additional requirements for aluminium alloy castings. EN 1592-1, Aluminium and alum
44、inium alloys HF seam welded tubes Part 1: Technical conditions for inspection and delivery. EN 1592-2, Aluminium and aluminium alloys HF seam welded tubes Part 2: Mechanical properties. EN 1592-3, Aluminium and aluminium alloys HF seam welded tubes Part 3: Tolerances on dimensions and form for circu
45、lar tubes. EN 15088:2005 (E) 7 EN 1592-4, Aluminium and aluminium alloys HF seam welded tubes Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes. EN 1706, Aluminium and aluminium alloys Castings Chemical composition and mechanical properties. prEN 1999-1-1, Eurocode 9
46、: Design of aluminium structures Part 1-1: General rules prEN 1999-1-3, Eurocode 9: Design of aluminium structures Part 1-3: Additional rules for structures susceptible to fatigue. prEN 1999-1-4, Eurocode 9: Design of aluminium structures Part 1-4: Supplementary rules for trapezoidal sheeting. EN 10
47、204, Metallic products Types of inspection documents. EN 12020-1, Aluminium and aluminium alloys Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Part 1: Technical conditions for inspection and delivery. EN 12020-2, Aluminium and aluminium alloys Extruded precision profiles in alloys
48、EN AW-6060 and EN AW-6063 Part 2: Tolerances on dimensions and form. EN 12258-1:1998, Aluminium and aluminium alloys Terms and definitions Part 1: General terms. EN 13920-1, Aluminium and aluminium alloys Scrap Part 1: General requirements, sampling and tests. EN ISO 1519, Paints and varnishes Bend
49、test (cylindrical mandrel) (ISO 1519:2002). EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000). ISO 8062, Castings System of dimensional tolerances and machining allowances. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 12258-1:1998 and the following apply. 3.1 casting unwrought product at or near finished sh
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1