EN 15101-1-2013 en Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1 Specification for the products before installation《建筑物隔热.pdf

1、BSI Standards PublicationBS EN 15101-1:2013Thermal insulation productsfor buildings In-situ formedloose fill cellulose (LFCI)productsPart 1: Specification for the products beforeinstallationBS EN 15101-1:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15101

2、-1:2013. The UK participation in its preparation was entrusted to TechnicalCommittee PRI/72, Rigid cellular materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contr

3、act. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 77758 5 ICS 91.100.60 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the a

4、uthority of the Standards Policy and Strategy Committee on 31 October 2013.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 15101-1:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15101-1 September 2013 ICS 91.100.60 English Version Thermal insulation products for buildi

5、ngs - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation Produits isolants thermiques destins aux applications du btiment - Isolation thermique forme en place base de cellulose (LFCI) - Partie 1 : Spcification des produits en vrac avant l

6、a mise en oeuvre Wrmedmmstoffe fr Gebude - An der Verwendungsstelle hergestellter Wrmedammstoff aus Zellulosefllstoff (LFCI) - Teil 1: Spezifikation fr die Produkte vor dem Einbau This European Standard was approved by CEN on 8 August 2013. CEN members are bound to comply with the CEN/CENELEC Intern

7、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any C

8、EN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official vers

9、ions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

10、Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitat

11、ion in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15101-1:2013: EBS EN 15101-1:2013EN 15101-1:2013 (E) 2 Contents Page Foreword . 5 1 Scope 6 2 Normative references . 6 3 Terms, definitions, symbols and abbreviations 7 3.1 Terms and definitions 7 3.2 Symbols 8

12、 3.3 Abbreviations . 9 4 Requirements . 9 4.1 General . 9 4.2 For all applications . 9 4.2.1 Thermal resistance and thermal conductivity 9 4.2.2 Settlement 10 4.2.3 Reaction to fire . 10 4.2.4 Durability 10 4.3 For specific applications 11 4.3.1 General . 11 4.3.2 Short-term water absorption 11 4.3.

13、3 Water vapour diffusion resistance factor 11 4.3.4 Dangerous substances 11 4.3.5 Corrosion resistance of the insulation material on certain metals 11 4.3.6 Mould fungi resistance 11 4.3.7 Airflow resistivity . 12 4.3.8 Continuous Glowing Combustion . 12 4.3.9 Sound absorption. 12 4.3.10 Reaction to

14、 fire of product in standardised assemblies simulating end-use applications . 12 5 Test methods 13 5.1 Sampling . 13 5.2 Conditioning . 13 5.3 Testing 13 5.3.1 General . 13 5.3.2 Thermal resistance and thermal conductivity 15 6 Designation code . 15 7 Evaluation of conformity 16 7.1 General . 16 7.2

15、 Initial type testing . 16 7.3 Factory production control 16 8 Marking and labelling . 16 Annex A (normative) Determination of declared thermal resistance and thermal conductivity 17 A.1 General . 17 A.2 Input data 17 A.3 Declared values of thermal resistance and thermal conductivity 17 Annex B (nor

16、mative) Laboratory methods for the determination of settlement 19 B.1 Blown LFCI for ventilated attics (open blow) determination of settlement under cyclic humidity 19 B.1.1 Principle 19 B.1.2 Apparatus . 19 B.1.3 Test specimens 19 B.1.4 Test procedure . 19 BS EN 15101-1:2013EN 15101-1:2013 (E) 3 B.

17、1.5 Test report 21 B.2 Blown LFCI in timber and steel framed walls determination of settlement under vibrations 21 B.2.1 Principle 21 B.2.2 Apparatus . 21 B.2.3 Test specimen 23 B.2.4 Procedure . 23 B.2.5 Calculation and expression of test results 24 B.2.6 Accuracy of measurements . 24 B.2.7 Test re

18、port 24 B.3 Blown LFCI for ventilated attics determination of settlement under impact excitation and under increased temperature and moisture (informative and for FPC only) 25 B.3.1 Principle 25 B.3.2 Apparatus . 25 B.3.3 Test specimens 26 B.3.4 Test procedure . 27 B.3.5 Calculations and expression

19、of results . 27 B.3.6 Test report 28 Annex C (normative) Testing for reaction to fire of products . 30 C.1 Scope 30 C.1.1 General . 30 C.1.2 Product and installation parameters . 30 C.1.3 Ignitability (EN ISO 11925-2) 31 C.1.4 Single Burning Item SBI (EN 13823) for loose-fill cellulose insulation pr

20、oducts 32 Annex D (normative) Specimen preparation method for the water absorption test . 36 D.1 Principle 36 D.2 Conditioning . 36 D.3 Procedure . 36 Annex E (normative) Method of test for corrosion resistance 37 E.1 Principle 37 E.2 Conditioning . 37 E.3 Reagents and materials . 37 E.4 Apparatus .

21、 37 E.5 Procedure . 38 E.6 Classification of the results . 38 E.7 Report . 38 Annex F (normative) Method for determining mould fungi resistance . 39 F.1 Scope 39 F.2 Significance and use 39 F.3 Apparatus . 39 F.4 Reagents and materials . 39 F.4.1 Water . 39 F.4.2 Inoculum . 40 F.5 Specimens 40 F.5.1

22、 Viability control specimens . 40 F.5.2 Comparative material . 40 F.5.3 Test specimens 40 F.6 Procedure . 40 F.6.1 Spore suspension 40 F.6.2 Inoculation of test specimens, comparative material and control specimens 41 F.6.3 Incubation . 41 F.7 Test analysis . 41 F.7.1 General . 41 F.7.2 Validation 4

23、2 F.7.3 Classification 42 F.8 Report . 42 F.9 Precision and bias 42 BS EN 15101-1:2013EN 15101-1:2013 (E) 4 Annex G (normative) Specimen preparation method for the airflow resistance test . 43 G.1 Principle 43 G.2 Procedure . 43 Annex H (normative) Specimen preparation method for thermal resistance

24、and thermal conductivity test . 44 H.1 Principle 44 H.2 Procedure . 44 H.2.1 Horizontal applications, loft and floors . 44 H.2.2 Cavity insulation, frame constructions and cavity walls 45 Annex I (normative) Factory production control . 47 Annex J (normative) Testing for reaction to fire of products

25、 in standardised assemblies simulating end-use application(s) . 50 J.1 Scope 50 J.2 Product and installation parameters . 50 J.3 Mounting and fixing . 51 J.3.1 Ignitability (EN ISO 11925-2) 51 J.3.2 Single Burning Item SBI (EN 13823) 51 J.4 Field of application . 54 Annex K (normative) An example of

26、 a performance chart 56 Annex ZA (informative) Clause of this European Standard addressing the provisions of the EU Construction Products Directive . 57 ZA.1 Scope and relevant characteristics . 57 ZA.2 Procedure for attestation of conformity of in situ formed loose-fill cellulose . 59 ZA.2.1 System

27、(s) of attestation of conformity 59 ZA.2.2 EC Certificate and Declaration of conformity . 61 ZA.3 CE marking and labelling . 62 Bibliography 64 BS EN 15101-1:2013EN 15101-1:2013 (E) 5 Foreword This document (EN 15101-1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating mate

28、rials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by Mar

29、ch 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European

30、Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of two parts which form a package. The first part i

31、s the harmonised part satisfying the mandate and the CPD and is the basis for the CE marking covering the products, which are placed on the market. The second part, which is the non-harmonised part, covers the installation checks for the installed products. This European Standard is one of a series

32、for mineral wool, expanded clay, expanded perlite, exfoliated vermiculite, polyurethane/polyisocyanurate, cellulose, bound expanded polystyrene and expanded polystyrene in-situ formed insulation products used in buildings, but this standard may be used in other areas where appropriate. The reduction

33、 in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries a

34、re bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, P

35、ortugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15101-1:2013EN 15101-1:2013 (E) 6 1 Scope This European Standard specifies requirements for loose-fill cellulose insulation (LFCI) products for the thermal and/or sound insulation of buildings when

36、 installed into walls, floors, galleries, roofs and ceilings. This European Standard is a specification for the loose-fill cellulose insulation (LFCI) products before installation. This European Standard describes the product characteristics and includes procedures for testing, marking and labelling

37、 and the rules for evaluation of conformity. Products covered by this European Standard may also be used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. Products with a declared thermal conductivity

38、at 10 C greater than 0,060 W/(m K) or a declared thermal resistance lower than 0,25 m2 K/W are not covered by this European Standard. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular applicatio

39、n. The required levels are to be found in local regulations or non-conflicting standards. This European Standard does not cover factory made cellulose products placed on the market as bats, mats or boards intended to be used for the insulation of buildings or loose-fill cellulose products for the in

40、sulation of building equipment and industrial installations. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the l

41、atest edition of the referenced document (including any amendments) applies. EN 312, Particleboards - Specifications EN 508-1, Roofing products from metal sheet Specification for self-supporting products of steel, aluminium or stainless steel sheet Part 1: Steel EN 520, Gypsum plasterboards Definiti

42、ons, requirements and test methods EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12086:2013, Thermal insulation products for building applications Determination of water vapour transmission properties EN 12667, The

43、rmal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 13172:2012, Thermal insulating products Evaluation of conformity EN 13238, Reaction to fire tests for bu

44、ilding products Conditioning procedures and general rules for selection of substrates EN 13501-1, Fire classification of construction products and building elements Part 1 Classification using data from reaction to fire tests EN 13823:2010, Reaction to fire tests for building products Building produ

45、cts excluding floorings exposed to the thermal attack by a single burning item BS EN 15101-1:2013EN 15101-1:2013 (E) 7 EN 29053, Acoustics Materials for acoustical applications Determination of airflow resistance (ISO 9053) EN ISO 354:2003, Acoustics Measurement of sound absorption in a reverberatio

46、n room (ISO 354:2003) EN ISO 10456 Building materials and products Hygrothermal properties Tabulated design values and procedures for determining declared and design thermal values (ISO 10456) EN ISO 11654, Acoustics Sound absorbers for use in buildings Rating of sound absorption (ISO 11654) EN ISO

47、11925-2, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2) ISO 12491, Statistical methods for quality control of building materials and components 3 Terms, definitions, symbols and abbreviations 3.1 Terms

48、and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 open blow applications all applications except cavity applications 3.1.2 declared insulation thickness: “open blow” applications installed insulation thickness minus the thickness loss according to th

49、e settlement class of the product 3.1.3 declared insulation thickness: cavity applications identical with the thickness of the cavity 3.1.4 floor horizontal division between two storeys, over a crawl space or a floor directly on the ground 3.1.5 frame construction walls with wood or metal studs, sloping roof with insulation between and above rafters, as well as stud girders and internal and external insulation on solid masonry construction 3.1.6 settlement decrease of installed insulation thickness in lofts or heig