1、BSI Standards PublicationBS EN 15208:2014Tanks for transport ofdangerous goods Sealedparcel delivery systems Working principles andinterface specificationsBS EN 15208:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15208:2014. Itsupersedes BS EN 15208:2007
2、which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee AUE/18, Tanks for the transport of dangerous goods.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the nece
3、ssaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 78581 8ICS 13.300; 23.020.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stand
4、ard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2014.Amendments issued since publicationDate Text affectedBS EN 15208:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15208 May 2014 ICS 23.020.20 Supersedes EN 15208:2007English Version Tanks for
5、transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications Citernes destines au transport de matires dangereuses -Systmes de livraison par cargaisons scelles - Principes de fonctionnement et spcification des interfaces Tanks fr die Befrderung gefh
6、rlicher Gter - Versiegelte Transportsysteme - Arbeitsgrundlagen und Schnittstellenfestlegungen This European Standard was approved by CEN on 20 March 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s
7、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,
8、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cr
9、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
10、 United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No
11、. EN 15208:2014 EBS EN 15208:2014EN 15208:2014 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Aims (functions) of SPDS 10 5 Functionality 10 6 Design characteristics . 14 7 Tests . 20 8 Marking 25 9 Installation, operating and maintenan
12、ce recommendations 25 Annex A (normative) DTMQ guide using smart card . 26 Annex B (normative) PID protocol . 65 Annex C (normative) Correspondence system 68 Annex D (informative) Mechanical endurance test apparatus 69 Bibliography . 70 BS EN 15208:2014EN 15208:2014 (E) 3 Foreword This document (EN
13、15208:2014) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
14、 November 2014 and conflicting national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such
15、patent rights. This document supersedes EN 15208:2007. According to edition EN 15208:2007 the following fundamental changes are given: Annex B revised; Annex D deleted; referred standards updated. This document forms part of a coherent standards programme comprising the following standards: EN 13616
16、, Overfill prevention devices for static tanks for liquid petroleum fuels EN 13922, Tanks for transport of dangerous goods Service equipment for tanks Overfill prevention systems for liquid fuels EN 14116, Tanks for transport of dangerous goods Digital interface for product recognition devices for l
17、iquid fuels EN 15207, Tanks for transport of dangerous goods Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage EN 15969-1, Tanks for transport of dangerous goods Digital interface for the data transfer between tank vehicle and
18、 with stationary facilities Part 1: Protocol specification Control, measurement and event data EN 15969-2, Tanks for transport of dangerous goods Digital interface for the data transfer between tank vehicle and with stationary facilities Part 2: Commercial and logistic data This document is applicab
19、le for tanks according to ADR 1. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav R
20、epublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15208:2014EN 15208:2014 (E) 4 Introduction Seale
21、d parcel delivery systems, the subject of this European Standard, provide information concerning the content and the status of each compartment, used to transfer liquid fuels from loading gantries to delivery points, and optionally, the delivered quantities. SPDS may be suitable for other applicatio
22、n, e.g. sealed transfer of products subject to duties. Sealed parcel delivery systems may be classified according to: the combination of functions implemented by the system; the way the functions are implemented (“type of function”). Sealed parcel delivery systems are not measuring instruments but t
23、hey may be ancillary devices as defined in OIML R 117 2. BS EN 15208:2014EN 15208:2014 (E) 5 1 Scope This European Standard is applicable to sealed parcel delivery systems used with transport tanks and specifies the performance requirements, critical safety aspects, data transfer methods between loa
24、ding gantries and transport tank, transport tank and delivery points, other optional communications and tests to provide functional and compatible systems. Sealed parcel delivery systems covered by this European Standard is for bottom loaded transport tanks. The systems specified by this European St
25、andard are suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR which have a vapour pressure not exceeding 110 kPa at 50 C and petrol, and which have no sub-classification as toxic or corrosive. 2 Normative references The following documents, in whole or i
26、n part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12266-1:2012, Industrial valves - Testing
27、of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements EN 12266-2, Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements EN 13082, Tanks for transport of dangerous go
28、ods - Service equipment for tanks - Vapour transfer valve EN 13083, Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading EN 13094, Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - De
29、sign and construction EN 13308, Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve EN 13314, Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover EN 13316, Tanks for transport of dangerous goods - Service equipment
30、 for tanks - Pressure balanced footvalve EN 13317, Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly EN 13616, Overfill prevention devices for static tanks for liquid petroleum fuels EN 13922, Tanks for transport of dangerous goods - Service equipment for
31、tanks - Overfill prevention systems for liquid fuels EN 14025, Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction EN 14116, Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels EN 14564, Tanks for tran
32、sport of dangerous goods - Terminology BS EN 15208:2014EN 15208:2014 (E) 6 EN 14595, Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and Vacuum Breather Vent EN 14596, Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief val
33、ve EN ISO 3166-1, Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1) ISO/IEC 7816-1, Identification cards - Integrated circuit cards - Part 1: Cards with contacts - Physical characteristics ISO/IEC 7816-2, Identification cards - Integrated
34、circuit cards - Part 2: Cards with contacts - Dimensions and location of the contacts ISO/IEC 7816-3:2006, Identification cards - Integrated circuit cards - Part 3: Cards with contacts - Electrical interface and transmission protocols ISO/IEC 7816-4:2013, Identification cards - Integrated circuit ca
35、rds - Part 4: Organization, security and commands for interchange 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 access port port through which it is possible to access to cargo and/or to change the physical characteristics of the parcel 3.2
36、 bottom loading according to EN 14564 3.3 cargo product contained within a parcel 3.4 clingage quantity of product that remains adhering to the parcels internal surfaces after a complete delivery 3.5 compartment vessel closed by a foot valve, vapour transfer valve and a manhole cover assembly 3.6 de
37、livery complete operation performed at a station to discharge products from one or more compartments into one or more tanks including a start and a finish phase 3.7 depot terminal site of the products to be loaded onto the tank vehicles and the location of the loading facilities BS EN 15208:2014EN 1
38、5208:2014 (E) 7 3.8 depot session time period covering the complete loading of the tank vehicle, starting at the beginning of the loading procedure and ending with the final loading or transfer operation 3.9 device for the transfer of measured quantities DTMQ all the equipment contained within a sys
39、tem that permits the secure transfer of metrological data between the loading rack, the tank vehicle and the delivery or transfer station 3.10 empty parcel parcel in which no product is present except clingage 3.11 equipment port port through which only access to cargo is possible 3.12 frustrated de
40、livery delivery of a parcel which does not result in an empty parcel 3.13 guaranteed cargo sum of measured quantities transferred into a sealed parcel under guaranteed routing where parcel emptiness has been previously automatically identified Note 1 to entry: In this case, the cargo within a parcel
41、 is equal to the guaranteed cargo. 3.14 guaranteed delivered volume volume of product passing a port of a parcel enabling the parcel to be empty (transferring point) 3.15 guaranteed routing routing that is satisfactorily completed under routing control 3.16 guaranteed transport transportation of a g
42、uaranteed cargo or a minimum guaranteed cargo or an automatically detected empty parcel 3.17 maximum guaranteed volume fill capacity of a compartment which corresponds to 97 % of the compartments total capacity 3.18 maximum sealable quantity maximum volume of product which can be guaranteed by the p
43、arcel 3.19 measured quantity routed product quantity as routed into a parcel which has been measured by an approved metering system 3.20 measurement cycle time period between the connection and the disconnection of a loading arm onto a parcel BS EN 15208:2014EN 15208:2014 (E) 8 3.21 measurement numb
44、er non-repeating sequence number (incrementing from 1) assigned to each measurement cycle when a measured quantity routed is available 3.22 metrological data data that includes product quantities and is used for metrological purposes 3.23 minimum guaranteed cargo sum of measured quantities transferr
45、ed into a sealed parcel under guaranteed routing Note 1 to entry: The cargo within a parcel may be greater than its minimum guaranteed cargo. 3.24 monitored port port whose closed position is checked automatically 3.25 non-guaranteed cargo condition of a guaranteed cargo or a minimum guaranteed carg
46、o once the parcel has been unsealed 3.26 operational port port which permits cargo transfer to or from the parcel in normal operation and through which it is not possible to change the physical characteristics of the parcel 3.27 parcel compartment(s) and all associated pipes and equipment, including
47、 its ports Note 1 to entry: This here defined term “parcel” should not be confused with the term in the packaging practice. 3.28 permanently closed port port which can only be opened by destroying it 3.29 port any inlet or outlet connection or hole in a parcel 3.30 return facility facility dedicated
48、 to the handling of product returns Note 1 to entry: This facility may include means to measure the returned volume. 3.31 returns undelivered product left in the parcel 3.32 routing transfer of a measured product quantity into a parcel BS EN 15208:2014EN 15208:2014 (E) 9 3.33 routing control control
49、 method used to ensure that the total measured quantity is transferred into the parcel 3.34 sealed parcel one whose ports are monitored closed by either mechanical or electronic devices or are permanently closed 3.35 sealed parcel delivery SPD process where a measured quantity of product is loaded into a parcel which is then sealed, controlled during transportation and discharged without the need for further measurement 3.36 sealed parcel delivery system SPDS instrumentation system that controls the seal status of a parcel 3
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1