EN 15501-2015 en Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Spe.pdf

1、BSI Standards PublicationBS EN 15501:2015Thermal insulation productsfor building equipment andindustrial installations Factory made expanded perlite(EP) and exfoliated vermiculite(EV) products SpecificationBS EN 15501:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementati

2、on of EN 15501:2015. It supersedes BS EN 15501:2013 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its

3、secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88446 7 ICS 91.100.60 Compliance with a British Standard

4、cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 15501:2015EUROPEAN STANDARD NORME EUROPENNE EUROPIS

5、CHE NORM EN 15501 December 2015 ICS 91.100.60 Supersedes EN 15501:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification Produits isolants thermiques pour lquipe

6、ment du btiment et les installations industrielles - Produits manufacturs en perlite expanse (EP) et base de vermiculite exfolie (EV) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Blhperlit (EP) u

7、nd expandiertem Vermiculit (EV) - Spezifikation This European Standard was approved by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alte

8、ration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language mad

9、e by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Eston

10、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDA

11、RDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15501:2015 EBS EN 15501:2015EN 15501:2015

12、 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 9 3.2 Symbols, units and abbrev

13、iated terms 9 3.2.1 Symbols and units . 9 3.2.2 Abbreviated terms . 10 4 Requirements 11 4.1 General . 11 4.2 For all applications 11 4.2.1 Thermal conductivity . 11 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 12 4.2.4 Reaction to fire 12 4.2.5 Durability characteristics . 13 4.3

14、For specific applications 13 4.3.1 General . 13 4.3.2 Maximum service temperature . 13 4.3.3 Minimum service temperature . 14 4.3.4 Compressive stress or compressive strength 14 4.3.5 Trace quantities of water soluble ions and the pH value 14 4.3.6 Water vapour diffusion resistance 15 4.3.7 Short-te

15、rm water absorption by partial immersion . 15 4.3.8 Release of dangerous substances . 15 4.3.9 Continuous glowing combustion 15 5 Test methods . 15 5.1 Sampling 15 5.2 Conditioning . 16 5.3 Testing 16 5.3.1 General . 16 5.3.2 Thermal conductivity . 18 5.3.3 Maximum service temperature . 18 5.3.4 Rea

16、ction to fire 19 6 Designation code 19 7 Assessment and Verification of the Constancy of Performance (AVCP) . 19 7.1 General . 19 7.2 Product Type Determination (PTD) 20 7.3 Factory Production Control (FPC) 20 8 Marking and labelling . 20 Annex A (normative) Factory production control . 21 BS EN 155

17、01:2015EN 15501:2015 (E) 3 Annex B (normative) Special conditions for the determination of organic content . 23 B.1 Principle . 23 B.2 Apparatus 23 B.3 Procedure 23 B.4 Calculation and expression of results . 23 B.5 Test report 23 Annex C (informative) Preparation of the test specimens to measure th

18、ermal conductivity . 24 C.1 Preparation of the test specimens to measure thermal conductivity . 24 C.2 Ageing . 24 Annex D (informative) Product specific details for mounting and fixing for reaction to fire testing . 25 Annex E (informative) Additional properties 30 E.1 General . 30 E.2 Coefficient

19、of thermal expansion 30 E.3 Apparent and true porosity 30 E.4 Air flow resistance 30 E.5 Creep in compression 30 E.6 Permeability to gases 30 E.7 Bending strength 30 E.8 Apparent density 30 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Prod

20、ucts Regulation . 32 ZA.1 Scope and relevant characteristics 32 ZA.2 Procedures for AVCP of factory made expanded perlite (EP) and exfoliated vermiculite (EV) products . 34 ZA.3 CE Marking and labelling . 41 Bibliography . 43 BS EN 15501:2015EN 15501:2015 (E) 4 European foreword This document (EN 15

21、501:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by J

22、une 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pate

23、nt rights. This document supersedes EN 15501:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 15501 a

24、re the following: a) an addition to the foreword; b) an addition in 3.2.2; c) a new 4.3.8; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European C

25、ommission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities,

26、who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the

27、 industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production control; Annex B (normative), Special conditions to be used for the determination of organic content; Annex C (informative), Preparation of the te

28、st specimens to measure thermal conductivity; BS EN 15501:2015EN 15501:2015 (E) 5 Annex D (informative), Product specific details for mounting and fixing for reaction to fire testing; NOTE This annex will be transferred to Annex A of EN 15715 when this document is being revised. Annex E (informative

29、), Additional properties; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment a

30、nd industrial installations, but this standard can be used in other areas, where appropriate. Other standards in the series include the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14

31、303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN

32、14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307,

33、 Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanura

34、te foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made poly

35、ethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factory made expanded

36、perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

37、Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15501:2015EN

38、15501:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made expanded perlite and exfoliated vermiculite products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately 0

39、C to + 1 100 C. Expanded perlite and exfoliated vermiculite products can be used below 0 C but special tests regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactur

40、ed in the form of boards, pipe sections, segments, prefabricated ware and special ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this European Standard are also used in prefabric

41、ated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that is achieved by a product to demonstrate fitness for purpose in a particular app

42、lication. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 C are not covered by this European Standard. This European Standard does not cover products intended to be used for

43、 the insulation of the building structure. The European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact transmission noise index. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and

44、 are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and width EN

45、 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products for building applications - Determination of squareness EN 825, Thermal insulating products for building applications - Determination of flatness EN 826, Thermal insulating pr

46、oducts for building applications - Determination of compression behaviour EN 1094-6, Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477) EN 1604, Thermal insulating products for building applications - Determination of dim

47、ensional stability under specified temperature and humidity conditions EN 1609, Thermal insulating products for building applications - Determination of short term water absorption by partial immersion BS EN 15501:2015EN 15501:2015 (E) 7 EN 12086, Thermal insulating products for building application

48、s - Determination of water vapour transmission properties EN 12667, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance EN 12939, Thermal performance of

49、 building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance EN 13172:2012, Thermal insulation products - Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating products for building equipment and industrial instal