EN 15632-1-2014 en District heating pipes - Pre-insulated flexible pipe systems - Part 1 Classification general requirements and test methods (Incorporates Amendment A1 2014)《区域供暖管.pdf

1、BSEN15632-1:2009ICS23.040.01NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAWBRITISHSTANDARDDistrictheatingpipesP re-insulatedflexiblepipesystemsPart1:Classification,generalrequirementsandtestmethodsBS EN 15632-1:2009 +A1:2014BS EN 15632-1:2009+A1:2014ISBN 978 0 580 83311 3Amendments/corr

2、igenda issued since publicationDate Comments31 January 2015 Implementation of CEN amendment A1:2014This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2009 The British Standards Institution 2015. Published by BSI Standards Limited 201

3、5National forewordThis British Standard is the UK implementation of EN 15632-1:2009+A1:2014. It supersedes BS EN 15632-1:2009, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of

4、the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee RHE/9, Insulated underground pipelines.A list of organizations represented on this committee can be obtained on request to its secretary.The

5、publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15632-1:2009+A1 December 2014 IC

6、S 23.040.01 Supersedes EN 15632-1:2009English Version District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods Tuyaux de chauffage urbain - Systmes de tuyaux flexibles prisols - Partie 1: Classification, prescriptions gnrales et mth

7、odes dessai Fernwrmerohre - Werkmig gedmmte flexible Rohrsysteme - Teil 1: Klassifikation, allgemeine Anforderungen und Prfungen This European Standard was approved by CEN on 5 December 2008 and includes Amendment 1 approved by CEN on 8 November 2014. CEN members are bound to comply with the CEN/CEN

8、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

9、or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the of

10、ficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

11、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights o

12、f exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15632-1:2009+A1:2014 EEN 15632-1:2009+A1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Classification . 12 5 Requirements 12 5.1

13、Thermal insulation properties . 12 5.2 Flexibility . 12 5.3 Resistance to external actions 13 5.4 Insulation Layer 13 5.4.1 Compressive creep . 13 5.4.2 Water absorption at elevated temperatures . 13 5.5 Casing 13 5.5.1 UV stability 13 5.5.2 Thermal stability . 13 5.5.3 Stress crack resistance 13 5.

14、5.4 Use of rework material . 14 5.6 Surveillance systems . 14 6 Test methods . 14 6.1 General . 14 6.2 Flexibility . 14 6.3 Compressive creep . 15 6.3.1 General . 15 6.3.2 Principles of testing . 16 6.3.3 Test apparatus 16 6.3.4 Test sample . 17 6.3.5 Test procedure 18 6.3.6 Calculation and expressi

15、on of results 18 7 Marking 20 7.1 General marking aspects . 20 7.2 Minimum marking information 20 8 Manufacturers information . 20 Annex A (normative) !Thermal conductivity of pre-insulated pipes Test procedure“ . 21 A.1 General . 21 A.2 Requirements 21 A.2.1 Test specimen . 21 A.2.2 Operating tempe

16、rature . 21 A.2.3 Types of apparatus . 21 A.3 Apparatus 21 A.3.1 Guarded end apparatus . 21 BS EN 15632-1:2009+A1:2014EN 15632-1:2009+A1:2014 (E)EN 15632-1:2009+A1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Classification . 12

17、5 Requirements 12 5.1 Thermal insulation properties . 12 5.2 Flexibility . 12 5.3 Resistance to external actions 13 5.4 Insulation Layer 13 5.4.1 Compressive creep . 13 5.4.2 Water absorption at elevated temperatures . 13 5.5 Casing 13 5.5.1 UV stability 13 5.5.2 Thermal stability . 13 5.5.3 Stress

18、crack resistance 13 5.5.4 Use of rework material . 14 5.6 Surveillance systems . 14 6 Test methods . 14 6.1 General . 14 6.2 Flexibility . 14 6.3 Compressive creep . 15 6.3.1 General . 15 6.3.2 Principles of testing . 16 6.3.3 Test apparatus 16 6.3.4 Test sample . 17 6.3.5 Test procedure 18 6.3.6 Ca

19、lculation and expression of results 18 7 Marking 20 7.1 General marking aspects . 20 7.2 Minimum marking information 20 8 Manufacturers information . 20 Annex A (normative) !Thermal conductivity of pre-insulated pipes Test procedure“ . 21 A.1 General . 21 A.2 Requirements 21 A.2.1 Test specimen . 21

20、 A.2.2 Operating temperature . 21 A.2.3 Types of apparatus . 21 A.3 Apparatus 21 A.3.1 Guarded end apparatus . 21 EN 15632-1:2009+A1:2014 (E) 3 A.3.2 Calibrated end apparatus . 22 A.3.3 Dimensions 22 A.3.4 Heater pipe surface temperature . 22 A.4 Test specimens 22 A.4.1 Conditioning 22 A.4.2 Surface

21、 temperature measurement . 22 A.4.3 Location of temperature sensors 22 A.5 Procedure . 22 A.5.1 Test length . 22 A.5.2 Diameter and dimension measurement 22 A.5.3 Thickness of casing 23 A.5.4 Ambient requirements 23 A.5.5 Test pipe temperature . 24 A.5.6 Power supply . 24 A.5.7 Axial heat loss . 24

22、A.5.8 Test period and stability . 24 A.6 Calculations - Thermal conductivity 24 Annex B (normative) !Calculation of the heat flow from the medium to the ambient loss of pre-insulated buried district heating pipes“ 26 B.1 General . 26 B.2 Calculations . 26 B.2.1 Single pipe system (SPS) . 26 B.2.2 Tw

23、in pipe system (TPS) 27 B.2.3 Radial thermal resistance of the surrounding soil 27 B.3 Declared values of the radial thermal resistance of buried pipe systems 27 Annex C (!informative“) Determination of design values for the radial thermal resistance 28 Annex D (informative) !Guideline for testing“

24、29 D.1 General . 29 D.2 Tests . 29 D.2.1 Type test (Qualification test) 29 D.2.2 Quality surveillance test . 30 D.2.3 Production test 30 Bibliography 31 BS EN 15632-1:2009+A1:2014EN 15632-1:2009+A1:2014 (E)EN 15632-1:2009+A1:2014 (E) 4 Foreword This document (EN 15632-1:2009+A1:2014) has been prepar

25、ed by Technical Committee CEN/TC 107 “Prefabricated district heating pipe systems”, the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicti

26、ng national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document sup

27、ersedes EN 15632-1:2009. This document includes Amendment 1 approved by CEN on 2014-11-08. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document is one of a series of standards which form several parts of EN 15632, District heating pipes P

28、re-insulated flexible pipe systems: Part 1: Classification, general requirements and test methods; Part 2: Bonded system with plastic service pipes; requirements and test methods; Part 3: Non bonded system with plastic service pipes; requirements and test methods; Part 4: Bonded system with metal se

29、rvice pipes; requirements and test methods. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former

30、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15632-1:2009+A1:2014EN 15632-1:2009+A

31、1:2014 (E)EN 15632-1:2009+A1:2014 (E) 4 Foreword This document (EN 15632-1:2009+A1:2014) has been prepared by Technical Committee CEN/TC 107 “Prefabricated district heating pipe systems”, the secretariat of which is held by DS. This European Standard shall be given the status of a national standard,

32、 either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/o

33、r CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15632-1:2009. This document includes Amendment 1 approved by CEN on 2014-11-08. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This

34、 document is one of a series of standards which form several parts of EN 15632, District heating pipes Pre-insulated flexible pipe systems: Part 1: Classification, general requirements and test methods; Part 2: Bonded system with plastic service pipes; requirements and test methods; Part 3: Non bond

35、ed system with plastic service pipes; requirements and test methods; Part 4: Bonded system with metal service pipes; requirements and test methods. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European

36、Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia

37、, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 15632-1:2009+A1:2014 (E) 5 Introduction Flexible pipe systems in district heating networks are of common technical usage. In order to assure quality including product-related lifetime, to assure safety in use, economical energy usage an

38、d to facilitate comparability in the market, CEN/TC 107 decided to set up standards for these products. BS EN 15632-1:2009+A1:2014EN 15632-1:2009+A1:2014 (E)EN 15632-1:2009+A1:2014 (E) 6 1 Scope This European Standard provides classification, general requirements and test methods for flexible, pre-i

39、nsulated, directly buried district heating pipe systems. It is intended to be used in conjunction with parts 2, 3, 4, and 5. Depending on the pipe assembly (see Table 4), this European Standard is valid for maximum operating temperatures of 95 C to 140 C and operating pressures of 6 bar to 25 bar. T

40、he pipe systems are designed for a lifetime of 30 years. For pipe systems with plastic service pipes, the respective temperature profiles are defined in EN 15632-2 and EN 15632-3. NOTE For the transport of other liquids, for example potable water, additional requirements may be applicable. 2 Normati

41、ve references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !EN 253:2009+A1:2013“, District hea

42、ting pipes Preinsulated bonded pipe systems for directly buried hot water networks Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene EN 489, District heating pipes Preinsulated bonded pipe systems for directly buried hot water networks Joint assemb

43、ly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene EN 728, Plastics piping and ducting systems Polyolefin pipes and fittings Determination of oxidation induction time EN 744, Plastics piping and ducting systems Thermoplastics pipes Test method for resistance

44、 to external blows by the round-the-clock method EN 1605, Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep E

45、N 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medi

46、um thermal resistance EN 13941, Design and installation of preinsulated bonded pipe systems for district heating EN 14419:2003, District heating pipes Pre-insulated bonded pipe systems for directly buried hot water networks Surveillance systems EN 60811-4-1:2004, Insulating and sheathing of electric

47、 and optical cables Common test methods Part 4-1: Methods specific to polyethylene and polypropylene compounds Resistance to environmental stress cracking Measurement of the melt flow index Carbon black and/or mineral filler content measurement in BS EN 15632-1:2009+A1:2014EN 15632-1:2009+A1:2014 (E

48、)EN 15632-1:2009+A1:2014 (E) 6 1 Scope This European Standard provides classification, general requirements and test methods for flexible, pre-insulated, directly buried district heating pipe systems. It is intended to be used in conjunction with parts 2, 3, 4, and 5. Depending on the pipe assembly

49、(see Table 4), this European Standard is valid for maximum operating temperatures of 95 C to 140 C and operating pressures of 6 bar to 25 bar. The pipe systems are designed for a lifetime of 30 years. For pipe systems with plastic service pipes, the respective temperature profiles are defined in EN 15632-2 and EN 15632-3. NOTE For the transport of other liquids, for example potable water, additional requirements may be applicable. 2 Normative references The following referenced documents are indispensable for the app