EN 15651-2-2012 6250 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2 Sealants for glazing《建筑物和行人专用区连接用非结构密封剂 玻璃密封剂》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15651-2:2012Sealants for non-structuraluse in joints in buildings andpedestrian walkwaysPart 2: Sealants for glazingCopyright European Committee for Standardization Provide

2、d by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15651-2:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15651-2:2012.It supersedes BS EN 15651-2:2010 which is withdrawn.The UK participa

3、tion in its preparation was entrusted to TechnicalCommittee B/547, Sealants for building and construction.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are

4、 responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 76843 9ICS 91.100.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStan

5、dards Policy and Strategy Committee on 30 September 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15651-2:2012EU

6、ROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15651-2 September 2012 ICS 91.100.50 Supersedes EN 15651-2:2010English Version Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing Mastics pour joints pour des usages non structuraux dans les

7、 constructions immobilires et pour chemins pitonniers - Partie 2: Mastics pour vitrage Fugendichtstoffe fr nicht tragende Anwendungen in Gebuden und Fugngerwegen - Teil 2: Fugendichtstoffe fr Verglasungen This European Standard was approved by CEN on 10 August 2012. CEN members are bound to comply w

8、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Man

9、agement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same s

10、tatus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma

11、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All right

12、s of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-2:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15651

13、-2:2012EN 15651-2:2012 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .54 Requirements .54.1 Identification requirements and test methods 54.1.1 Short description of the sealant .54.1.2 Thermogravimetric test .64.1.3 Specific Gravity test 64.1.4 Hardness (indentat

14、ion) test (Shore Hardness) .64.2 Conditioning, test procedure and substrates .64.3 Performance requirements .74.3.1 General 74.3.2 Sealants for glazing elements in cold climates 84.3.3 Resistance to flow .94.3.4 Resistance to water and UV 94.3.5 Resistance to compression 94.4 Release of dangerous su

15、bstances 104.5 Reaction to fire 104.5.1 General . 104.5.2 Mounting and fixing conditions for test samples 105 Durability . 126 Sampling 127 Evaluation of conformity 127.1 General . 127.2 Initial type testing . 127.3 Factory production control 128 Marking and labelling . 12Annex A (informative) Examp

16、le on the frequency of tests for factory production control 13Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive . 14ZA.1 Scope and relevant characteristics 14ZA.2 Procedure for attestation of conformity of non-structural elastic

17、sealants used for sealing glazing 16ZA.2.1 Systems of attestation of conformity . 16ZA.2.2 EC certificate of conformity and EC declaration of conformity . 18ZA.3 CE marking and labelling . 19ZA.3.1 General . 19ZA.3.2 CE marking on the packaging . 20ZA.3.3 CE marking in the accompanying commercial do

18、cuments . 20Bibliography . 23Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15651-2:2012EN 15651-2:2012 3 Foreword This document (EN 15651-2:2012) has been prepared by Tec

19、hnical Committee CEN/TC 349 “Sealants for joints in building construction”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2013, and conflicting n

20、ational standards shall be withdrawn at the latest by June 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document superse

21、des EN 15651-2:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of

22、this document. This document is one part of the product European Standards within the framework series of EN 15651 on Sealants for non-structural use in joints in buildings and pedestrian walkways, as follows: Part 1: Sealants for facade elements, Part 2: Sealants for glazing (this document), Part 3

23、: Sealants for sanitary joints, Part 4: Sealants for pedestrian walkways, Part 5: Evaluation of conformity and marking. The following significant technical changes have been implemented in this new edition: an Annex ZA has been added; the clause on reaction to fire was improved. According to the CEN

24、/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungar

25、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo rep

26、roduction or networking permitted without license from IHS-,-,-BS EN 15651-2:2012EN 15651-2:2012 4 1 Scope This European Standard specifies definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications. It covers glazing joints from 7

27、 horizontal. Main areas of application are: glass to glass; glass to frame; glass to porous substrates. Excluding aquariums, structural bonding/glazing, inner and outer seal to manufacture insulated glazing units, horizontal glazing (below 7), organic glass (e.g. polycarbonate, PMMA, etc.). 2 Normat

28、ive references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) a

29、pplies. EN 13238, Reaction to fire tests for building products Conditioning procedures and general rules for selection of substrates EN 13501-1:2007+A1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 15651-5:2012, S

30、ealants for non-structural use in joints in buildings and pedestrian walkways Part 5: Evaluation of conformity and marking EN ISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868) EN ISO 1183-1:2004, Plastics Methods for determining th

31、e density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) EN ISO 6927:2012, Buildings and civil engineering works Sealants Vocabulary (ISO 6927:2012) EN ISO 7389, Building construction Jointing products Determination of elastic recov

32、ery of sealants (ISO 7389) EN ISO 7390, Building construction Jointing products Determination of resistance to flow of sealants (ISO 7390) EN ISO 8339, Building construction Sealants Determination of tensile properties (Extension to break) (ISO 8339) EN ISO 8340, Building construction Sealants Deter

33、mination of tensile properties at maintained extension (ISO 8340) EN ISO 9046, Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046) EN ISO 9047, Building construction Jointing products Determination of adhesion/cohesion

34、properties of sealants at variable temperatures (ISO 9047) Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15651-2:2012EN 15651-2:2012 5 EN ISO 10563, Building construction

35、 Sealants Determination of change in mass and volume (ISO 10563) EN ISO 10590, Building construction Sealants Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590) EN ISO 10591, Building construction Sealants Determination of adhesion/cohesion p

36、roperties of sealants after immersion in water (ISO 10591) EN ISO 11358, Plastics Thermogravimetry (TG) of polymers General principles (ISO 11358) EN ISO 11431, Building construction Jointing products Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artific

37、ial light through glass (ISO 11431) EN ISO 11432, Building construction Sealants Determination of resistance to compression (ISO 11432) EN ISO 11600, Building construction Jointing products Classification and requirements for sealants (ISO 11600) EN ISO 11925-2, Reaction to fire tests Ignitability o

38、f products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2) ISO 13640, Building construction Jointing products Specifications for test substrates 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 6927:2012 and

39、the following apply. 3.1 non-reactive sealant mainly physical drying mechanism, without significant change in the molecular weight of the main polymer 3.2 reactive sealant mainly curing by chemical reaction, with significant increase of the molecular weight of the main polymer 3.3 cure irreversible

40、transformation of a sealant from a liquid or paste-like state into a hardened or rubber-like solid state 3.4 uncured/wet state of a sealant prior to the above transformation 4 Requirements 4.1 Identification requirements and test methods 4.1.1 Short description of the sealant The short description o

41、f the non-structural sealant for glazing elements shall include: brand name, type (general chemical family), opaque or translucent, waterborne or solvent based or solvent free, reactive or non-reactive, and one or multi-component (e.g. neutral cure, reactive silicone and one component, etc.). Copyri

42、ght European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 15651-2:2012EN 15651-2:2012 6 The primer shall be stated for the substrate concerned if relevant (name, chemical type, etc.). 4.1.

43、2 Thermogravimetric test The test shall be carried out in accordance with EN ISO 11358 on the uncured or wet sealant, between 35 C to 900 C, temperature slope 10 C/min, non-oxidative condition (e.g. nitrogen). A single sample shall be used for this test. A single specimen may be tested and there sha

44、ll be no significant difference between the reference curve and derivative (profile). In the case of multi-component sealant, each component shall be evaluated (if relevant). 4.1.3 Specific Gravity test The determination of the specific gravity shall be in accordance with EN ISO 1183-1:2004, on the

45、uncured or wet sealant, using Method A or Method B, depending on the type of sealant under test. The testing temperature shall be (23 2) C. At least three samples shall be tested. The method used and the mean value, recorded to two decimal places, shall be declared. The tolerance of the declared val

46、ues shall be within 5 %. 4.1.4 Hardness (indentation) test (Shore Hardness) The determination of the indentation hardness shall be in accordance with EN ISO 868. The test shall be performed on the cured or dried sealant. The exact conditions of test shall be defined by the manufacturer, i.e. thickne

47、ss, cure/drying times and temperature and relative humidity, specific hore type (A, D), test time, temperature, etc. At least three samples shall be tested and the five measurements taken per sample. The mean value and tolerances of all measurements, recorded to the nearest unit, shall be declared.

48、4.2 Conditioning, test procedure and substrates When determining the classification of a glazing sealant according to the requirements of this standard, the same conditioning procedure shall be used in all relevant test methods (use only Method A or Method B). For each test method, three test specimens for each substrate shall be tested. The same batch of sealant (and primer, if used) shall be used in all tests. The sam