1、BSI Standards PublicationBS EN 15683-2:2013Glass in building Thermallytoughened soda lime silicatechannel shaped safety glassPart 2: Evaluation of conformity/ProductstandardBS EN 15683-2:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15683-2:2013.The UK pa
2、rticipation in its preparation was entrusted to TechnicalCommittee B/520/1, Basic and transformed glass products.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Us
3、ers are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 80206 5ICS 81.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of
4、theStandards Policy and Strategy Committee on 31 December 2013.Amendments issued since publicationDate Text affectedBS EN 15683-2:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15683-2 December 2013 ICS 81.040.20 English Version Glass in building - Thermally toughened soda lime silicate ch
5、annel shaped safety glass - Part 2: Evaluation of conformity/Product standard Verre dans la construction - Verre de silicate sodo-calcique profil de scurit tremp thermiquement - Partie 2 : Evaluation de la conformit/Norme de produit Glas im Bauwesen - Thermisch vorgespanntes Kalknatron-Profilbau-Sic
6、herheitsglas - Teil 2: Konformittsbewertung/Produktnorm This European Standard was approved by CEN on 30 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
7、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language
8、 made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E
9、stonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR S
10、TANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15683-2:2013 EBS EN 15683-2:2013EN 1
11、5683-2:2013 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 6 4 Requirements . 6 4.1 Product description . 6 4.2 Conformity with the definition of thermally toughened soda lime silicate channel shaped safety glass 7 4.3 Determination of the performances of
12、 characteristics 7 4.3.1 Characteristics of thermally toughened soda lime silicate channel shaped safety glass . 7 4.3.2 Determination of characteristics of thermally toughened soda lime silicate channel shaped safety glass products 8 4.4 Durability 10 4.5 Dangerous substances . 11 5 Evaluation of c
13、onformity . 11 5.1 General 11 5.2 Initial type testing of the product (see 5.1, b) 11 5.2.1 General 11 5.2.2 Initial type testing of thermally toughened soda lime silicate channel shaped safety glass 13 5.2.3 Initial type testing of characteristics performances . 15 5.3 Factory production control an
14、d inspection of samples in accordance with a prescribed test plan (see 5.1, a) 1) and 2) 15 5.4 Initial inspection of factory and of factory production control (see 5.1, a) 2) . 16 5.5 Continuous surveillance and assessment of the factory production control (see 5.1, a) 3) . 16 6 Marking and labelli
15、ng 17 6.1 General 17 6.2 Product marking 17 6.3 Product characteristics . 17 6.4 “Characteristic/performance identification paper“ 17 Annex A (normative) Factory production control 18 A.1 Factory production control requirements . 18 A.1.1 General 18 A.1.2 Organisation . 18 A.1.3 Control system . 18
16、A.2 Marking . 19 A.3 Inspection and testing tables of thermally toughened soda lime silicate channel shaped safety glass production 19 A.3.1 Information to the Table A.1 . 19 A.3.2 Product control 20 A.3.3 Use of proxy testing 20 Annex B (informative) Tests for factory production control . 24 B.1 Fr
17、agmentation test 24 B.1.1 Requirements . 24 B.1.2 Test method 24 Annex C (informative) Provisions for voluntary involvement of third party(ies) 25 C.1 General 25 C.2 Voluntary tasks for third parties 25 BS EN 15683-2:2013EN 15683-2:2013 (E) 3 C.3 Marking and labelling 25 Annex ZA (normative) Clauses
18、 of this European Standard addressing the provisions of EU Construction Products Directive . 26 ZA.1 Scope and relevant characteristics . 26 ZA.2 Procedure(s) for the attestation of conformity of thermally toughened soda lime silicate channel shaped safety glass products . 28 ZA.2.1 System(s) of att
19、estation of conformity 28 ZA.2.2 EC Certificate and Declaration of Conformity 31 ZA.3 CE marking and labelling 32 Bibliography 35 BS EN 15683-2:2013EN 15683-2:2013 (E) 4 Foreword This document (EN 15683-2:2013) has been prepared by Technical Committee CEN/TC 129 “Glass in Building”, the secretariat
20、of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at the latest by June 2014. Attention is drawn to the poss
21、ibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade
22、Association, and supports essential requirements of EU Directives. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 15683 is composed of the following parts: EN 15683-1, Glass in building Thermally toughened soda lime silicate channel sh
23、aped safety glass Part 1: Definition and description EN 15683-2, Glass in building Thermally toughened soda lime silicate channel shaped safety glass Part 2: Evaluation of conformity/Product standard According to the CEN-CENELEC Internal Regulations, the national standards organizations of the follo
24、wing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N
25、orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15683-2:2013EN 15683-2:2013 (E) 5 1 Scope This European Standard covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate cha
26、nnel shaped safety glass for use in buildings. This also includes requirements subject to regulation. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cit
27、ed applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building Security glazing Testing and classification of resistance against manual attack EN 410, Glass in building Determination of luminous and solar characteristic
28、s of glazing EN 572-1, Glass in building Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties EN 572-7, Glass in building Basic soda lime silicate glass products Part 7: Wired or unwired channel shaped glass EN 673, Glass in building Determinat
29、ion of thermal transmittance (U value) Calculation method EN 1063, Glass in building Security glazing Testing and classification of resistance against bullet attack EN 1096-1, Glass in building Coated glass Part 1: Definitions and classification EN 1096-2, Glass in building Coated glass Part 2: Requ
30、irements and test methods for class A, B and S coatings EN 12600, Glass in building Pendulum test Impact test method and classification for flat glass EN 12758, Glass in building Glazing and airborne sound insulation Product descriptions and determination of properties EN 12898, Glass in building De
31、termination of the emissivity EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13501-2, Fire classification of construction products and building elements Part 2: Classification using data from fire resist
32、ance tests, excluding ventilation services EN 13501-5, Fire classification of construction products and building elements Part 5: Classification using data from external fire exposure to roofs tests EN 13541, Glass in building Security glazing Testing and classification of resistance against explosi
33、on pressure EN 15683-1:2013, Glass in building Thermally toughened soda lime silicate channel shaped safety glass Part 1: Definition and description BS EN 15683-2:2013EN 15683-2:2013 (E) 6 3 Terms and definitions For the purpose of this document, the terms and definitions given in EN 15683-1:2013 an
34、d the following apply. 3.1 initial type testing determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardised, tabulated or general accepted values, standardised or recognised calculation method
35、s, test reports when made available, ), in accordance with this document that demonstrates compliance with this document 3.2 test report document that covers the results of tests undertaken on a representative sample of the product from production or on a prototype design of the product 3.3 product
36、description document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a product that complies with the standard and which includes specific reference(s) to characteristics that are modified by the production process 3.4 significant change variation in perf
37、ormance beyond the permitted tolerance for the characteristic 3.5 plank length of channel shaped glass 4 Requirements 4.1 Product description For conformity purposes, the thermally toughened soda lime silicate channel shaped glass manufacturer is responsible for the preparation and maintenance of th
38、e product description. This description shall describe the product and/or product families. Disclosure of the product description shall be at the discretion of the thermally toughened glass manufacturer or his agent except in the case of regulatory requirements. The description shall contain at leas
39、t a normative part. The description may also contain an informative part, when the manufacturer foresees further development of the product. The normative part of the description shall contain the following minimum information: a reference to EN 15683-1 and EN 15683-2 and all other standards with wh
40、ich the manufacturer claims compliance; the spectrophotometric properties and durability of coated glass, i.e. coated glass that conforms with EN 1096-1 and EN 1096-2, when those properties are changed, intentionally or unintentionally, by the thermal toughening process. The definition of product fa
41、milies shall be consistent with the normative part of the product description. BS EN 15683-2:2013EN 15683-2:2013 (E) 7 The substitution of materials shall maintain the conformity with the product description. The substituting material can be added to the product family and also the product descripti
42、on when compliance has been demonstrated. 4.2 Conformity with the definition of thermally toughened soda lime silicate channel shaped safety glass Products shall conform to the definition and fulfil the requirements of thermally toughened soda lime silicate channel shaped safety glass as defined in
43、EN 15683-1. 4.3 Determination of the performances of characteristics 4.3.1 Characteristics of thermally toughened soda lime silicate channel shaped safety glass 4.3.1.1 General The characteristics of thermally toughened soda lime silicate channel shaped safety glass are those of the glass substrate
44、(see 4.3.1.2). 4.3.1.2 Characteristics of channel shaped glass used for thermally toughened soda lime silicate channel shaped safety glass Planks shall be made of unwired channel shaped glass products according to EN 572-1 and EN 572-7. The panes may be coated according to EN 1096-1 and EN 1096-2, a
45、nd/or enamelled according to EN 15683-1. For the characteristics listed in Table 1, for thermally toughened soda lime silicate channel shaped safety glass, generally accepted values or calculated values shall be used. Since the majority of the characteristics of Table 1 are not changed significantly
46、 by the thermal toughening process they shall be used for thermally toughened soda lime silicate channel shaped safety glass. The exceptions shall be the characteristic bending strength fg,k and the resistance against sudden temperature changes and temperature differentials. BS EN 15683-2:2013EN 156
47、83-2:2013 (E) 8 Table 1 Information on the characteristics of basic channel shaped glass, according to EN 572-1, used for the production of thermally toughened soda lime silicate channel shaped safety glass Characteristic Symbol Unit - Density - Hardness (knoop hardness in accordance with ISO 9358)
48、- Youngs modulus - Poissons ratio - Characteristic bending strength - Resistance against sudden temperature changes and temperature differentials - Specific heat capacity - Coefficient of linear expansion - Thermal conductivity (for U-value) - Mean refractive index to visible radiation - Emissivity
49、- Light transmittance - Solar direct transmittance - Total energy transmittance HK0,1/20 E fg,k c n veg kg/m GPa Pa Dimensionless Pa K J/(kgK) K-1W/(mK) Dimensionless Dimensionless Dimensionless Dimensionless Dimensionless If some coatings, i.e. coated glass conforming with the EN 1096 series, when thermally toughened change their radiometric properties the manufacturer shall refer to the following for the determination of the appropriate characteristics, etc.: 4.3.2.12 for the emiss
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1