EN 15701-2016 en Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods《塑料-建筑设备和工业装置用隔热产品用热塑性套.pdf

1、BS EN 15701:2016Plastics Thermoplasticjackets for insulation productsfor building equipmentand industrial installations Requirements and testmethodsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 15701:2016 BRITISH STANDARDNational forewordThis British Standard

2、 is the UK implementation of EN 15701:2016.It supersedes BS EN 15701:2009 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/21, Testing of plastics.A list of organizations represented on this committee can be obtained on request to its secretary.This

3、 publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 88367 5 ICS 83.140.99 Compliance with a British Standard cannot confer

4、immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 15701:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15

5、701 November 2016 ICS 83.140.99 Supersedes EN 15701:2009English Version Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods Plastiques - Enveloppes thermoplastiques pour isolants destins au btiment et aux instal

6、lations industrielles - Exigences et mthodes dessai Kunststoffe - Ummantelungen aus thermoplastischen Kunststoffen fr Dmmstoffe fr die Haustechnik und fr betriebstechnische Anlagen - Anforderungen und Prfungen This European Standard was approved by CEN on 20 August 2016. CEN members are bound to com

7、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELE

8、C Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the s

9、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

10、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2

11、016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15701:2016 EBS EN 15701:2016EN 15701:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Requirements . 5 4.1 Requireme

12、nts for the material composition of the jackets . 5 4.2 Requirements for vinyl chloride (VC) residual monomer content . 5 4.3 Technical and mechanical requirements . 5 4.3.1 General 5 4.3.2 Technical and mechanical requirements for film for linear applications 5 4.3.3 Technical and mechanical requir

13、ements for the initial material for mouldings 6 4.3.4 Technical and mechanical requirements for the mouldings . 6 4.3.5 Other requirements for film for linear applications and for the initial material for mouldings 7 4.4 Reaction to fire . 7 4.5 Release of dangerous substances 7 4.6 Durability of re

14、action to fire against ageing/degradation . 7 5 Test methods 7 5.1 Chemical testing 7 5.1.1 VC residual monomer content 7 5.2 Mechanical testing 8 5.2.1 Film thickness 8 5.2.2 Tensile-impact strength 8 5.3 Reaction to fire test 8 5.4 Scope of fire classification 8 6 Marking, labelling and packaging

15、. 8 7 Assessment and verification of constancy of performance (AVCP) 9 7.1 General 9 7.2 Type Testing 9 7.2.1 General 9 7.2.2 Test reports . 9 7.3 Factory production control (FPC) 10 7.3.1 General . 10 7.3.2 Requirements 10 7.3.3 Product specific requirements 12 7.3.4 Initial inspection of factory a

16、nd of FPC 13 7.3.5 Continuous surveillance of FPC . 13 7.3.6 Procedure for modifications 14 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No. 305/2011 . 15 Bibliography . 19 BS EN 15701:2016EN 15701:2016 (E) 3 European foreword This document (EN 15701:2016) has b

17、een prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards sha

18、ll be withdrawn at the latest by August 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15701:2009. This document h

19、as been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Regulation n 305/2011. For relationship with EU Regulation n 305/2011, see informative Annex ZA, which is an integral part of this document. Acc

20、ording to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, German

21、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15701:2016EN 15701:2016 (E) 4 1 Scope This European Standard specifies the requireme

22、nts for thermoplastic jackets for insulation products for building equipment and industrial installations and the test methods to be used. The European Standard does not apply to systems in which the jackets have already been securely fixed over the whole surface of an insulating material in situ. 2

23、 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendm

24、ents) applies. EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests EN 15715, Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products

25、 EN ISO 6401, Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401) EN ISO 8256, Plastics - Determination of tensile-impact strength (ISO 8256) EN ISO 11925-2, Reaction to fire tests - Ignitability of products subjected to direct i

26、mpingement of flame - Part 2: Single-flame source test (ISO 11925-2) ISO 4593, Plastics Film and sheeting Determination of thickness by mechanical scanning 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 film plastic sheeting generally suppli

27、ed in the form of a roll 3.2 moulding single or multi-part, three-dimensional product which is made by thermoforming of a plastic film or board and which is made up of cut and machined film/boards EXAMPLE Elbows, branches, covers, valve coatings, special parts. 3.3 laminate combination of two or mor

28、e materials that are bonded together during manufacture to produce a single item or product SOURCE: EN ISO 9229:2007, 2.3.13 3.4 linear application use of jackets on insulation on straight sections of pipe BS EN 15701:2016EN 15701:2016 (E) 5 3.5 board rectangular solid product generally supplied in

29、slabs 3.6 thermoplastic, noun plastic that has thermoplastic properties SOURCE: EN ISO 472:2013, 2.1178 3.7 thermoplastic, adjective capable of being softened repeatedly by heating and hardened by cooling through a temperature range characteristic of the plastic and, in the softened state, of being

30、shaped by flow repeatedly into articles by moulding, extrusion or forming SOURCE: EN ISO 472:2013, 2.1177 3.8 jackets rigid, semi-rigid, frequently preformed sheet material that provides mechanical and/or environmental protection or a decorative finish to thermal insulation SOURCE: EN ISO 9229:2007,

31、 2.5.2 4 Requirements 4.1 Requirements for the material composition of the jackets Thermoplastic materials within the meaning of this standard are homogenous plastics, composite structures (laminates) of different plastics and composite structures of plastics and other materials including primers wh

32、ere the percentage by mass of the plastic film shall be at least 80 %. 4.2 Requirements for vinyl chloride (VC) residual monomer content Only plastic film shall be used that has a VC residual monomer content not exceeding 0,000 1 % by mass. The test shall be carried out according to 5.1.1. 4.3 Techn

33、ical and mechanical requirements 4.3.1 General With regard to the technical and mechanical requirements, a distinction is made between: a) film in linear applications; b) plastic film or boards as initial materials for mouldings or finished mouldings made from them. 4.3.2 Technical and mechanical re

34、quirements for film for linear applications 4.3.2.1 Film thickness The tolerances given in Table 1 relative to the nominal thickness shall be maintained in at least 95 % of all measurements. BS EN 15701:2016EN 15701:2016 (E) 6 Table 1 Tolerances relative to the nominal thickness Nominal thickness m

35、Tolerance % 200 10 201 to 400 7 400 5 The test shall be carried out according to 5.2.1. 4.3.2.2 Tensile-impact strength The tensile-impact strength shall be at least 300 kJ/m2. The test shall be carried out according to 5.2.2. 4.3.2.3 Width The permissible tolerance of the actual width from the nomi

36、nal width shall be 1 mm. The tolerance shall be maintained in at least 95 % of all width measurements. 4.3.2.4 Roll run length For nominal run lengths up to 50 m, the tolerance shall be 0,5 m. The tolerance shall be maintained in at least 95 % of all run length measurements. 4.3.3 Technical and mech

37、anical requirements for the initial material for mouldings The initial material for mouldings shall have a tensile-impact strength of at least 300 kJ/m2. 4.3.4 Technical and mechanical requirements for the mouldings 4.3.4.1 Moulding thickness The Material thickness min of the mouldings shall meet th

38、e requirements of Table 2. BS EN 15701:2016EN 15701:2016 (E) 7 Table 2 Material thickness min Moulding Material thickness min Elbows Branches End pieces 0,15 mm Valve coatings 0,2 mm Special parts no specification 4.3.4.2 Overlapping The design of the mouldings shall allow an overlap of at least 10

39、mm during assembly. 4.3.5 Other requirements for film for linear applications and for the initial material for mouldings For thermal calculations, the values given in Table 3 shall be made available by the manufacturer either as general calculation values based on the literature or as explicit measu

40、red values. Table 3 Values to be made available Physical variable Symbol Unit Emissivity Thermal conductivity W/mK 4.4 Reaction to fire Where required, the reaction to fire of the jackets shall be determined according to 5.3 and 5.4. Moulded parts used for assembling the jackets are not subject to t

41、esting. 4.5 Release of dangerous substances National regulations on dangerous substances may require verification and declaration on release, and sometimes content, when construction products covered by this standard are placed on those markets. In the absence of European harmonized test methods, ve

42、rification and declaration on release/content should be done taking into account national provisions in the place of use. NOTE An informative database covering European and national provisions on dangerous substances is available at the Construction website on EUROPA accessed through: https:/ec.euro

43、pa.eu/growth/tools-databases/cp-ds_en/. 4.6 Durability of reaction to fire against ageing/degradation The reaction to fire performance of thermoplastic jackets does not change with time. 5 Test methods 5.1 Chemical testing 5.1.1 VC residual monomer content The residual content of monomer vinyl chlor

44、ide shall be determined according to EN ISO 6401. BS EN 15701:2016EN 15701:2016 (E) 8 5.2 Mechanical testing 5.2.1 Film thickness The test shall be carried out according to ISO 4593. In addition, random measurements shall be taken and recorded. 5.2.2 Tensile-impact strength The test shall be carried

45、 out according to EN ISO 8256. 5.3 Reaction to fire test The requirements of EN 13501-1:2007+A1:2009, Table 3 “Classes of reaction to fire performance for linear pipe thermal insulation products” apply as the classification criteria of the jackets. The reaction to fire test of the jackets shall be c

46、arried out linearly according to EN 15715 on mineral wool A1Lor A2Lpipe sections with an insulation thickness of 30 mm. When testing according to EN ISO 11925-2, the jackets shall be subject only to surface flame impingement. The film shall be fastened to the pipe sections with rivets. For the test,

47、 the film shall be aligned with the closing seam in the direction of the back plate. 5.4 Scope of fire classification Provided that the jacketing is installed tightly on the insulation product, the classification applies to installation: by fixing with plastic push in rivets; by fixing with solvent-

48、based adhesive; on any type of CE-marked insulation product with any insulation thickness. 6 Marking, labelling and packaging Each packaging unit shall be clearly marked by the manufacturer with the following information, either directly on the packaging, with an enclosed notice or with an adhesive

49、label: a) name of the manufacturer or supplier; b) trade name of the product; c) dimensions of the product; d) quantity of the contents; e) batch number and/or date of production; f) number of this European Standard, i.e. EN 15701. BS EN 15701:2016EN 15701:2016 (E) 9 7 Assessment and verification of constancy of performance (AVCP) 7.1 General The compliance of Thermoplastic jackets with the requirements of this standard and with performances declared by the manufacturer in the Declaration of performance (DoP) shall be demonstr