EN 15715-2009 en Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products《绝热产品 防火试验用安装和固定说明书 工厂制品》.pdf

1、BS EN 15715:2009ICS 13.220.50; 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts Instructions formounting and fixingfor reaction to firetesting Factorymade productsThis British Standard was published under the authority of the S

2、tandards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 59264 5Amendments/corrigenda issued since publicationDate CommentsBS EN 15715:2009National forewordThis British Standard is the UK implementation of EN 15715:2009. The UK participation in its preparation was entrusted to

3、 TechnicalCommittee B/540, Energy performance of materials components andbuildings.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its co

4、rrect application. Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 15715:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15715 November 2009 ICS 91.100.60 English Version Thermal insulation products - Instructions for mounting and fixing for reaction to

5、 fire testing - Factory made products Produits isolants thermiques - Instructions de montage et de fixations pour lessai de raction au feu - Produits isolants thermiques manufacturs Wrmedmmstoffe - Einbau- und Befestigungsbedingungen fr die Prfung des Brandverhaltens - Werkmig hergestellte Wrmedmmst

6、offe This European Standard was approved by CEN on 29 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi

7、cal references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE

8、N member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, I

9、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1

10、000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15715:2009: EBS EN 15715:2009EN 15715:2009 (E) 2 Contents Page Foreword 5 1 Scope 9 2 Normative references 9 3 Terms, definitions and abbreviated terms 9 3.1 Terms a

11、nd definitions .9 3.2 Abbreviated terms used in this European Standard . 10 4 Principle . 10 5 Instructions for mounting and fixing of test specimens 11 5.1 General . 11 5.2 Product and installation parameters 11 5.3 Mounting and fixing 12 5.3.1 Ignitability, EN ISO 11925-2 Exposure to thermal attac

12、k 12 5.3.2 Single Burning Item (SBI), EN 13823 12 5.4 Validity of test results for product groups (Field of application) 18 6 Instructions for mounting and fixing of products in standardised assemblies simulating end-use application(s) 18 6.1 General . 18 6.2 Product and installation parameters 19 6

13、.3 Mounting and fixing 20 6.3.1 Ignitability, EN ISO 11925-2 . 20 6.3.2 Single Burning Item (SBI) (EN 13823) . 20 6.4 Validity of test result for a product group (Field of application) . 25 Annex A (normative) Product specific details . 26 A.1 General . 26 A.2 Mineral wool (MW) 26 A.3 Expanded polys

14、tyrene (EPS) . 34 A.4 Extruded polystyrene foam (XPS) . 39 A.5 Polyurethane and polyisocyanurate (PUR/PIR) . 44 A.6 Phenolic Foam (PF) 50 A.7 Cellular Glass (CG) . 56 A.8 Wood Wool (WW) 63 A.9 Expanded perlite (EPB) 67 A.10 Expanded cork (ICB) 70 A.11 Wood fibre (WF) 73 A.12 Flexible elastomeric foa

15、m (FEF) 76 A.13 Calcium silicate (CS) 82 Thickness . 84 Exposure to thermal attack . 85 Size and positioning of test specimen 85 Fixing of test specimen . 85 A.14 Polyethylene foam (PEF) 88 Bibliography . 94 Tables Table 1 Product parameters . 11 BS EN 15715:2009EN 15715:2009 (E) 3 Table 2 Installat

16、ion parameters 12 Table 3 Thermal insulation product parameters in standardised assemblies 19 Table 4 Installation parameters of standardised assemblies 19 Table 5 Standard test configurations of standardised assemblies 21 Table A.1 Product parameters for MW flat products, when tested as placed on t

17、he market or in standard test configuration of assemblies . 26 Table A.2 Installation parameters for MW flat products, as placed on the market 29 Table A.3 Product parameters for MW pipe insulation products, as placed on the market . 30 Table A.4 Installation parameters for MW pipe insulation produc

18、ts, as placed on the market 31 Table A.5 Installation parameters for MW flat products in standard test configuration of assemblies, simulating end-use applications 32 Table A.6 Product parameters for EPS flat products, when tested as placed on the market or in standard test configuration of assembli

19、es . 34 Table A.7 Installation parameters for EPS flat products as placed on the market 35 Table A.8 Product parameters for EPS pipe insulation products, as placed on the market 36 Table A.9 Installation parameters for EPS pipe insulation products, as placed on the market . 37 Table A.10 Installatio

20、n parameters for EPS flat products in standard test configuration of assemblies, simulating end-use applications 38 Table A.11 Product parameters for XPS flat products when tested as placed on the market or in standard test configuration of assemblies . 39 Table A.12 Installation parameters for XPS

21、flat products as placed on the market . 40 Table A.13 Product parameters for XPS pipe insulation products, as placed on the market . 41 Table A.14 Installation parameters for XPS pipe insulation products, as placed on the market . 42 Table A.15 Installation parameters for XPS flat products in standa

22、rd test configuration of assemblies, simulating end-use applications 43 Table A.16 Product parameters for PUR/PIR flat products when tested as placed on the market or in standard test configuration of assemblies. 44 Table A.17 Installation parameters for PUR/PIR flat products, as placed on the marke

23、t 45 Table A.18 Product parameters for PUR/PIR pipe insulation products, as placed on the market . 46 Table A.19 Installation parameters for PUR/PIR - pipe insulation products, as placed on the market. 47 Table A.20 Installation parameters for PUR/ PIR flat products in standard test configuration of

24、 assemblies, simulating end-use applications 48 Table A.21 Product parameters for PF flat products, when tested as placed on the market or in standard test configuration of assemblies . 50 Table A.22 Installation parameters for PF flat products, as placed on the market 51 Table A.23 Product paramete

25、rs for PF pipe insulation products, as placed on the market . 52 Table A.24 Installation parameters for PF pipe insulation products, as placed on the market 53 Table A.25 Installation parameters for PF flat products in standard test configuration of assemblies, simulating end-use applications 54 Tab

26、le A.26 Product parameters for CG flat products when tested as placed on the market or in standard test configuration of assemblies . 56 Table A.27 Installation parameters for CG flat products, as placed on the market . 58 Table A.28 Product parameters for CG pipe insulation productsa, as placed on

27、the market . 59 Table A.29 Installation parameters for CG- linear pipe thermal insulation . 60 Table A.30 Installation parameters for CG flat products, in standard test configuration of assemblies simulating end-use applications 61 Table A.31 Product parameters for WW flat products, when tested as p

28、laced on the market or in standard test configuration of assemblies . 63 Table A.31 (continued) . 64 Table A.32 Installation parameters WW flat products, as placed on the market 65 BS EN 15715:2009EN 15715:2009 (E) 4 Table A.33 Installation parameters for WW flat products in standard test configurat

29、ion of assemblies simulating end-use applications . 66 Table A.34 Product parameters for EPB flat products, when tested as placed on the market or in standard test configuration of assemblies 67 Table A.35 Installation parameters for EPB flat products, as placed on the market . 68 Table A.36 Install

30、ation parameters for EPB flat products in standard test configuration of assemblies simulating end-use applications . 69 Table A.37 Product parameters for ICB flat products, when tested as placed on the market or in standard test configuration of assemblies 70 Table A. 38 Installation parameters for

31、 ICB flat products, as placed on the market . 71 Table A.39 Installation parameters for ICB flat products in standard test configuration of assemblies simulating end-use applications . 72 Table A.40 Product parameters for WF flat products, when tested as placed on the market or in standard test conf

32、iguration of assemblies 73 Table A.41 Installation parameters for WF flat products, as placed on the market . 74 Table A.42 Installation parameters for WF flat products, in standard test configuration of assemblies simulating end-use applications . 75 Table A.43 Product parameters for FEF flat produ

33、cts, when tested as placed on the market or in standard test configuration of assemblies 76 Table A.44 Installation parameters for FEF flat products, as placed on the market . 77 Table A.45 Product parameters for FEF pipe insulation products, as placed on the market 78 Table A.46 Installation parame

34、ters for FEF pipe insulation products, as placed on the market . 79 Table A.47 Installation parameters for FEF for flat products in standard test configuration of assemblies simulating end-use applications . 80 Table A.48 Product parameters for CS flat products when tested as placed on the market or

35、 in standard test configuration of assemblies 82 Table A.49 Installation Parameters for CS flat products as placed on the market . 83 Table A.50 Product parameters for CS pipe insulation products, as placed on the market 84 Table A.51 Installation parameters for CS pipe insulation products, as place

36、d on the market 85 Table A.52 Installation parameters for CS flat products in standard test configuration of assemblies simulating end-use applications . 86 Table A.53 Product parameters for PEF, flat products when tested as placed on the market or in standard test configuration of assemblies 88 Tab

37、le A.54 Installation parameters for PEF flat products, as placed on the market 89 Table A.55 Product parameters for PEF pipe insulation products as placed on the market . 90 Table A.56 Installation parameters for PEF pipe insulation products as placed on the market . 91 Table A.57 Installation param

38、eters for PEF for flat products in standard test configuration of assemblies simulating end-use applications . 92 Figures Figure 1 Installation of specimen according to EN 13823 15 Figure 2 Principle of positioning of minimum mechanical fixings 16 Figure 3 Joint arrangement for a product tested unco

39、vered (front view) . 16 Figure 4 Schematic drawings of the mounting of the test specimens in the SBI in the case of 25 mm insulation thickness . 17 Figure 5 Fixing corrugated steel sheet (New figure is being drawn) . 24 BS EN 15715:2009EN 15715:2009 (E) 5 Foreword This document (EN 15715:2009) has b

40、een prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and co

41、nflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This doc

42、ument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this document

43、. In pursuance of the mandate M/103 given to CEN by the European Commission and the European Free Trade Association, CEN/TC 88 had prepared a package of European Standards which was published in 2001. The aspect of instructions for mounting and fixing for reaction to fire testing not treated at that

44、 time is now being dealt within this European Standard. This European Standard supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of t

45、he Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard provides instructions for mounting and fixing for reaction to fire testing procedure for factory made thermal insulation products in building, bui

46、lding equipment and industrial installations. CEN/TC 88 have proposed to set the date of withdrawal (dow) of national standards which conflict with this European Standard 21 months after availability. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the foll

47、owing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo

48、venia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15715:2009EN 15715:2009 (E) 6 The moment this European Standard will have passed the CEN Formal Vote, subsequent alignments will have to be included in the relevant standards EN 13162 to EN 13171 as amendment: Clause Title Alignment4.2.

49、xxa)Reaction to fire Addition to Title: of the product as placed on the market New text: Reaction to fire classification of the product, as placed on the market, shall be determined in accordance with EN 13501-1 and the basic Mounting and Fixing rules given in EN 15715:2009. NOTE 1 This classification is compulsory and always included in the