1、BS EN 15743:2010ICS 91.100.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSupersulfated cement C omposition,specifications andconformity criteriaBS EN 15743:2010 +A1:2015BS EN 15743:2010+A1:2015ISBN 978 0 580 86696 8Amendments/corrigenda issued since publicat
2、ionDate Comments31 May 2015 Implementation of CEN amendment A1:2015This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2010. The British Standards Institution 2015. Published by BSI Standards Limited 2015National forewordThis British Sta
3、ndard is the UK implementation of EN 15743:2010+A1:2015. It supersedes BS EN 15743:2010 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text al
4、tered by CEN amendment A1 is indicated by .The UK participation in its preparation was entrusted by Technical Committee B/516, Cement and lime, to Subcommittee B/516/6, Cementspecifications.A list of organizations represented on this committee can be obtained on request to its secretary.This publica
5、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15743:2010+A1 April 2015 ICS 91.100.10
6、Supersedes EN 15743:2010English Version Supersulfated cement - Composition, specifications and conformity criteria Ciment sursulfat - Composition, spcifications et critres de conformit Sulfathttenzement - Zusammensetzung, Anforderungen und Konformittskriterien This European Standard was approved by
7、CEN on 11 December 2009 and includes Amendment 1 approved by CEN on 24 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
8、and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th
9、e responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugos
10、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN
11、DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15743:2010+A1:2015 EEN 15743:2010+A1:2015 (E) 2 Contents Page For
12、eword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Supersulfated cement .8 5 Constituents .8 5.1 Main constituents 8 5.1.1 Granulated blastfurnace slag (S) .8 5.1.2 Calcium sulfate (Cs) 8 5.2 Additional constituents .8 5.2.1 Portland cement clinker (K) 8 5.2.2 Ot
13、her additional constituents (A) .8 5.3 Additives .9 6 Composition and notation 9 7 Mechanical, physical, chemical and durability requirements 10 7.1 Mechanical requirements . 10 7.1.1 Standard strength . 10 7.1.2 Early strength 10 7.2 Physical requirements . 11 7.2.1 Initial setting time . 11 7.2.2
14、Soundness . 11 7.2.3 Heat of hydration 11 7.3 Chemical requirements 11 7.4 Durability requirements . 11 7.4.1 General . 11 7.4.2 Sulfate resistance . 12 7.5 Dangerous substances 12 8 Standard designation . 12 9 Conformity criteria 12 9.1 General requirements . 12 9.2 Conformity criteria for mechanic
15、al, physical and chemical properties and evaluation procedure 14 9.2.1 General . 14 9.2.2 Statistical conformity criteria 14 9.2.3 Single result conformity criteria 16 9.3 Conformity criteria for cement composition 17 9.4 Conformity criteria for properties of the cement constituents 17 Annex A (info
16、rmative) Precautions related to the use of supersulfated cement 18 A.1 Blending with other binders 18 A.2 Use of additions in concrete 18 A.3 Effects of weather, striking and curing 18 A.4 Heat treatment . 18 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the
17、EU Construction Products Regulation . 19 BS EN 15743:2010+A1:2015EN 15743:2010+A1:2015 (E)EN 15743:2010+A1:2015 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Supersulfated cement .8 5 Constituents .8 5.1 Main constituents 8 5.1.1 Granu
18、lated blastfurnace slag (S) .8 5.1.2 Calcium sulfate (Cs) 8 5.2 Additional constituents .8 5.2.1 Portland cement clinker (K) 8 5.2.2 Other additional constituents (A) .8 5.3 Additives .9 6 Composition and notation 9 7 Mechanical, physical, chemical and durability requirements 10 7.1 Mechanical requi
19、rements . 10 7.1.1 Standard strength . 10 7.1.2 Early strength 10 7.2 Physical requirements . 11 7.2.1 Initial setting time . 11 7.2.2 Soundness . 11 7.2.3 Heat of hydration 11 7.3 Chemical requirements 11 7.4 Durability requirements . 11 7.4.1 General . 11 7.4.2 Sulfate resistance . 12 7.5 Dangerou
20、s substances 12 8 Standard designation . 12 9 Conformity criteria 12 9.1 General requirements . 12 9.2 Conformity criteria for mechanical, physical and chemical properties and evaluation procedure 14 9.2.1 General . 14 9.2.2 Statistical conformity criteria 14 9.2.3 Single result conformity criteria
21、16 9.3 Conformity criteria for cement composition 17 9.4 Conformity criteria for properties of the cement constituents 17 Annex A (informative) Precautions related to the use of supersulfated cement 18 A.1 Blending with other binders 18 A.2 Use of additions in concrete 18 A.3 Effects of weather, str
22、iking and curing 18 A.4 Heat treatment . 18 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 19 EN 15743:2010+A1:2015 (E) 3 ZA.1 Scope and relevant characteristics . 19 ZA.2 Procedure for AVCP of supersulfated cements .
23、21 ZA.2.1 System of AVCP 21 ZA.2.2 Declaration of performance (DoP) . 23 ZA.2.2.1 General 23 ZA.2.2.2 Content 23 ZA.2.2.3 Example of DoP 24 ZA.3 CE marking and labelling 25“ Bibliography 27 BS EN 15743:2010+A1:2015EN 15743:2010+A1:2015 (E)EN 15743:2010+A1:2015 (E) 4 Foreword This document (EN 15743:
24、2010+A1:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015,
25、 and conflicting national standards shall be withdrawn at the latest by January 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.
26、This document includes Amendment 1, approved by CEN on 2014-11-24. This document supersedes EN 15743:2010. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This document has been prepared under a mandate given to CEN by the European Commission an
27、d the European Free Trade Association, and supports essential requirements of the EU Construction Products Regulation. For relationship with the EU Regulation concerning the CPR, see informative Annex ZA, which is an integral part of this document.“ Annex A is informative. This European Standard set
28、s out requirements for the composition and specifications of supersulfated cement. !The scheme for the assessment and verification of constancy of performance (AVCP) of supersulfated cement is that specified in EN 197-2.“ The requirements in this European Standard are based on the results of tests o
29、n cement in accordance with parts 1, 2, 3, 7, 8 and 9 of EN 196, Methods of testing cement. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, C
30、zech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United King
31、dom. BS EN 15743:2010+A1:2015EN 15743:2010+A1:2015 (E)EN 15743:2010+A1:2015 (E) 4 Foreword This document (EN 15743:2010+A1:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status o
32、f a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by January 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject
33、 of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2014-11-24. This document supersedes EN 15743:2010. The start and finish of text introduced or altered by amendment is indicated i
34、n the text by tags ! “. !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Construction Products Regulation. For relationship with the EU Regulation concerning the CPR, see in
35、formative Annex ZA, which is an integral part of this document.“ Annex A is informative. This European Standard sets out requirements for the composition and specifications of supersulfated cement. !The scheme for the assessment and verification of constancy of performance (AVCP) of supersulfated ce
36、ment is that specified in EN 197-2.“ The requirements in this European Standard are based on the results of tests on cement in accordance with parts 1, 2, 3, 7, 8 and 9 of EN 196, Methods of testing cement. According to the CEN/CENELEC Internal Regulations, the national standards organizations of th
37、e following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl
38、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 15743:2010+A1:2015 (E) 5 Introduction The basis for this European Standard has been the national standards already existing in Europe. Supersulfated cement was originally standa
39、rdised in several European countries, Belgium, France, Germany, Netherlands and the United Kingdom, and has been used in concrete for foundations and massive structures. The demand for quick setting cements enabling early formwork removal caused the manufacturing of supersulfated cements to be super
40、seded by those based on Portland cement clinker. Standards were either abandoned, as in France, or kept in the catalogue of standards but never used, as in the United Kingdom. In discharging the mandate given to CEN, Technical Committee TC 51 considered the large number of different cements involved
41、. It was decided to separate the “common cements“, where the hardening mainly depends on the hydration of calcium silicates and setting these out in EN 197-1, from “special cements“, i.e. those with additional or special properties. Supersulfated cement hardening depends on granulated blastfurnace s
42、lag activation by calcium sulfate. A lower heat of hydration than for Portland cement clinker results in lower early compressive strength than common cements and a significantly lower early heat of hydration. In addition, it produces concrete which has resistance to chemically aggressive environment
43、s, such as sulfates. Ongoing developments in material technology as well as in production technology again open the option to produce supersulfated cement fulfilling the demands and requirements of the market. As the principles in hydration differ from that of “common cements“ covered by EN 197-1, C
44、EN Technical Committee TC 51 decided to elaborate a separate standard for supersulfated cement. The rate of hardening and lower early strength require that additional precautions are considered when using supersulfated cements to ensure adequate concrete curing. BS EN 15743:2010+A1:2015EN 15743:2010
45、+A1:2015 (E)EN 15743:2010+A1:2015 (E) 6 1 Scope This European Standard defines and gives the specifications of supersulfated cement and its constituents. The definition of supersulfated cement includes the proportions in which the constituents are to be combined to produce products in accordance wit
46、h this standard. The definition also includes requirements the constituents have to meet and the mechanical, physical, chemical including heat of hydration requirements. This standard also states the conformity criteria and the related rules. NOTE 1 In addition to the specified requirements, an exch
47、ange of additional information between the cement manufacturer and user may be helpful. The procedures for such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or regulations or may be agreed between the parties concerned. NOTE 2 T
48、he word “cement“ in this standard is used to refer only to supersulfated cement unless otherwise specified. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,
49、the latest edition of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement Part 1: Determination of strength EN 196-2, Methods of testing cement Part 2: Chemical analysis of cement EN 196-3, Methods of testing cement Part 3: Determination of setting times and soundness EN 196-7, Methods of testing cement Part 7: Methods of taking and preparing samples of cement EN 196-8, Methods of testing cement Part 8: Heat of hydration - Solution method EN 196-9, Methods of testing cement Part 9: Heat of hydration - Semi-adiabati
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1