EN 15876-1-2010 6875 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1 Test suite structure and test purposes (Incorpora.pdf

1、BS EN15876-1:2010ICS 35.240.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDElectronic feecollection Evaluation of on-board and roadsideequipment forconformity to EN 15509Part 1: Test suite structure and testpurposes+A1:2012 Copyright European Committee for St

2、andardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 15876-1:2010+A1:2012. It supersedes BS EN 15876-1:2010, which is withdrawn.The UK participation

3、 in its preparation was entrusted to Technical Committee EPL/278, Road transport informatics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsibl

4、e for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 15876-1:2010+A1:2012This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2010. The British Standards Institution 2012. Publ

5、ished by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationDate Comments 30 June 2012 Implementation of CEN amendment A1:2012ISBN 978 0 580 76469 1The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN t

6、ext carry the number of the CEN amendment. For example, text altered by CENamendment A1 is indicated by !“.Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME

7、 EUROPENNE EUROPISCHE NORM EN 15876-1:2010+A1 April 2012 ICS 35.240.60 Supersedes EN 15876-1:2010English Version Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes Perception de tlpage - valuation de c

8、onformit de lquipement embarqu et de lquipement au sol lEN 15509 - Partie 1: Structure des suites de tests et intention des tests Elektronische Gebhrenerhebung - Konformittsprfung von Fahrzeuggerten und straenseitigen Einrichtungen mit der EN 15509 - Teil 1: Prfreihenstruktur und Prfzweck This Europ

9、ean Standard was approved by CEN on 4 March 2010 and includes Amendment 1 approved by CEN on 4 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

10、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

11、 translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

12、Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION E

13、UROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15876-1:2010+A1:2012: ECopyright European Committee for Standardization Provided by IHS under l

14、icense with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 15876-1:2010+A1:2012 (E) 2 Contents Page Foreword 41 Scope 62 Normative references 63 Terms and definitions .64 Abbreviations .95 Test Suite Structure 115.1 Structure 115.2 Reference to Conformance S

15、pecifications 115.3 Test Purposes . 125.3.1 TP Definition Conventions . 125.3.2 TP Naming Conventions 12Annex A (normative) Test Purposes for On Board Units . 14A.1 Introduction . 14A.2 Physical Layer . 14A.2.1 BV Test Purposes . 14A.2.2 BI Test Purposes. 15A.3 MAC 16A.3.1 BV Test Purposes . 16A.3.2

16、 BI Test Purposes. 17A.4 LLC . 21A.4.1 BV Test Purposes . 21A.4.2 BI Test Purposes. 22A.5 Application Layer 23A.5.1 Introduction and general conventions . 23A.5.2 Structure of BST and VST 24A.5.3 PDUs Parameters 28A.5.4 Application I-kernel test purposes for On Board Unit, security level 0 (AP-0BAS)

17、 . 31A.5.5 Application T-kernel test purposes for On Board Unit, security level 0 (AP-0FUN) 34A.5.6 Application data attributes test purposes, security level 0 (AP-0DAT). 40A.5.7 Application security test purposes, security level 0 (AP-0SEC) 54A.5.8 Application transaction test purposes, security le

18、vel 0 (AP-0TRA) 56A.5.9 Application I-kernel test purposes, security level 1 (AP-1BAS) 56A.5.10 Application T-kernel test purposes, security level 1 (AP-1FUN) . 57A.5.11 Application data attributes test purposes, security level 1 (AP-1DAT). 60A.5.12 Application security test purposes, security level

19、 1 (AP-1SEC) 63A.5.13 Application transaction test purposes, security level 1 (AP-1TRA) 64Annex B (normative) Test Purposes for Roadside Equipment 65B.1 Introduction . 65B.2 Physical layer 65B.2.1 BV test purposes 65B.2.2 BI test purposes 67B.3 MAC Sublayer 67B.3.1 BV test purposes 67B.3.2 BI test p

20、urposes 68B.4 LLC Sublayer . 72B.4.1 BV test purposes 72B.4.2 BI test purposes 73B.5 Application Layer Test Purposes 74BS EN 15876-1:2010+A1:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without licens

21、e from IHS-,-,-EN 15876-1:2010+A1:2012 (E) 3 B.5.1 Introduction and general conventions 74B.5.2 Application initialization phase test purposes, security level 0 (AP-0BAS) 75B.5.3 Application GET-rq PDU test purposes, security level 0 (AP-0GET) . 77B.5.4 Application SET-rq PDU test purposes, security

22、 level 0 (AP-0SET) 78B.5.5 Application GET-STAMPED-rq PDU test purposes, security level 0 (AP-0STA) . 82B.5.6 Application SET-MMI-rq PDU test purposes, security level 0 (AP-0MMI) 85B.5.7 Application ECHO-rq PDU test purposes, security level 0 (AP-0ECH) 86B.5.8 Application EVENT-REPORT-rq PDU test pu

23、rposes, security level 0 (AP-0REL). 87B.5.9 Application initialization phase test purposes, security level 1 (AP-1BAS) 88B.5.10 Application GET-rq PDU test purposes, security level 1 (AP-1GET) . 90B.5.11 Application SET-rq PDU test purposes, security level 1 (AP-1SET) 91B.5.12 Application GET-STAMPE

24、D-rq PDU test purposes, security level 1 (AP-1STA) . 92B.5.13 Application SET-MMI-rq PDU test purposes, security level 1 (AP-1MMI) 93B.5.14 Application ECHO-rq PDU test purposes, security level 1 (AP-1ECH) 93Annex C (normative) PCTR Proforma for On Board Units 95C.1 Identification summary . 95C.1.1

25、Protocol conformance test report . 95C.1.2 DUT identification 95C.1.3 Testing environment . 96C.1.4 Limits and reservation 96C.1.5 Comments 96C.2 DUT Conformance status . 97C.3 Static conformance summary 97C.4 Dynamic conformance summary . 97C.5 Static conformance review report . 98C.6 Test campaign

26、 report 99C.7 Observations 103Annex D (normative) PCTR Proforma for Roadside Equipment . 104D.1 Identification summary . 104D.1.1 Protocol conformance test report . 104D.1.2 DUT identification 104D.1.3 Testing environment . 105D.1.4 Limits and reservation 105D.1.5 Comments 105D.2 DUT Conformance sta

27、tus . 106D.3 Static conformance summary 106D.4 Dynamic conformance summary . 106D.5 Static conformance review report . 107D.6 Test campaign report 108D.7 Observations 110Bibliography 111BS EN 15876-1:2010+A1:2012Copyright European Committee for Standardization Provided by IHS under license with CENN

28、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 15876-1:2010+A1:2012 (E) 4 Foreword This document (EN 15876-1:2010+A1:2012) has been prepared by Technical Committee CEN/TC 278 “Road transport and traffic telematics”, the secretariat of which is held by NEN. This

29、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the

30、 elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and support

31、s essential requirements of EU Directive(s). This document includes Amendment 1, approved by CEN on 2012-03-04. This document supersedes EN 15876-1:2010. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. CEN/TC 278 has produced a set of standards t

32、hat support interoperable DSRC-EFC-systems e.g. EN ISO 14906 (a “toolbox“ for defining EFC-application transaction) and CEN ISO/TS 14907-2 (EFC application interface conformance tests for On Board Units). However, these standards are only of an enabling nature and do not guarantee unambiguous techni

33、cal interoperability. Therefore EN 15509, Road transport and traffic telematics Electronic fee collection Interoperability application profile for DSRC was developed to support technical interoperability between EFC-systems. This standard defines the test suite structure and the test purposes for co

34、nformity evaluation of OBUs and RSE designed for compliance with the requirements set up in EN 15509. A test standard for evaluation of conformity of on-board and roadside equipment is a necessary element for coherent, practical and effective appraisal of products compliance to EN 15509. This docume

35、nt forms Part 1 of a two-part standard: EN 15876-1, Electronic fee collection Evaluation of on-board and roadside equipment for conformity to EN 15509 Part 1: Test suite structure and test purposes EN 15876-2, Electronic fee collection Conformity evaluation of on-board and roadside equipment to EN 1

36、5509 Part 2: Abstract test suites Together, the two parts of EN 15876 provide the necessary foundation for implementation of the interoperability requirements as stated in EN 15509: industry is provided with an easy-to-use toolbox for product assessment; operators can easily assess conformity to EN

37、15509 and reference to the standard in tendering processes; authorities and joint undertakings may reference to the test standard when stating interoperability requirements; certification organisations are given an effective tool for certification of products. BS EN 15876-1:2010+A1:2012Copyright Eur

38、opean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 15876-1:2010+A1:2012 (E) 5 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countrie

39、s are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia

40、, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15876-1:2010+A1:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 15876-1:2010+A1:2012 (E) 6 1 Scope This

41、European Standard contains the Test Suite Structure (TSS) and Test Purposes (TP) to evaluate the conformity of On Board Units (OBU) and Roadside Equipment (RSE) to EN 15509. The objective of this document is to provide a basis for conformance tests for DSRC equipment (on board units and roadside uni

42、ts) to enable interoperability between different equipment supplied by different manufacturers. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest e

43、dition of the referenced document (including any amendments) applies. EN 15509:2007, Road transport and traffic telematics Electronic fee collection Interoperability application profile for DSRC EN ISO 3166-1, Codes for the representation of names of countries and their subdivisions Part 1: Country

44、codes (ISO 3166-1:2006) EN ISO 14816, Road transport and traffic telematics Automatic vehicle and equipment identification Numbering and data structure (ISO 14816:2005) EN ISO 14906:2004, Road transport and traffic telematics Electronic fee collection Application interface definition for dedicated s

45、hort-range communication (ISO 14906:2004) CEN ISO/TS 14907-2:2006, Road transport and traffic telematics Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the onboard unit application interface (ISO/TS 14907-2:2006) ETSI EN 300 674-1:2004, Electromag

46、netic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 1: General characteristics and

47、test methods for Road Side Units (RSU) and On-Board Units (OBU) ETSI TS 102 486-1-2:2008, Intelligent Transport Systems (ITS); Road Transport and Traffic Telematics (RTTT); Test specifications for Dedicated Short Range Communication (DSRC) transmission equipment; Part 1: DSRC data link layer: medium access and logical link control; Sub-Part 2: Test Suite Structure and Test Purposes (TSS Road Transport and Traffic Telematics (RTTT); Test specifications for Dedicated Short Range Communication (DSRC) transmission equipment; Part 2: DSRC application layer; Sub-Part 2: Test