1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15998:2010Glass in building Safety incase of fire, fire resistance Glass testing methodology forthe purpose of classificationBS EN 15998:2010 BRITISH STANDARDNational forew
2、ordThis British Standard is the UK implementation of EN 15998:2010.The UK participation in its preparation was entrusted to TechnicalCommittee B/520/4, Properties and glazing methods.A list of organizations represented on this committee can beobtained on request to its secretary.This publication doe
3、s not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 68555 2ICS 13.220.50; 81.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the au
4、thority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedBS EN 15998:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15998 November 2010 ICS 13.220.50; 81.040.20 English Version Glass in building - Safety in case of fire,
5、 fire resistance - Glass testing methodology for the purpose of classification Verre dans la construction - Scurit en cas dincendie, rsistance au feu - Mthodologie dessai du verre des fins de classification Glas im Bauwesen - Brandsicherheit, Feuerwiderstandsfhigkeit - Verfahrensweise von Glasprfung
6、en zur Klassifizierung This European Standard was approved by CEN on 9 October 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a
7、nd bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons
8、ibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hung
9、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centr
10、e: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15998:2010: EBS EN 15998:2010EN 15998:2010 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definiti
11、ons .64 Principles 94.1 General 94.2 Testing to determine fire resistance as a product characteristic for a glass 94.3 Applicable fire resistance tests . 104.4 Glass products 104.5 Classification report(s) . 105 Sampling 105.1 General . 105.1.1 General remark 105.1.2 Classification of a glass produc
12、t 115.1.3 Market application testing . 115.2 For determination of fire resistance as a product characteristic for a glass . 115.2.1 Classification of a glass product 115.2.2 Market application testing . 125.3 Non-sampled test results . 125.3.1 General . 125.3.2 Classification of a glass product 125.
13、3.3 Market application 125.4 Historic data 126 Use of test data in EXAP 13Annex A (informative) List of possible glass product standards (see 4.5) 14A.1 Monolithic basic or special basic glasses . 14A.2 Monolithic thermally toughened glasses . 14A.3 Laminated and laminated safety glasses . 15A.4 Ins
14、ulating glass units . 15A.5 Coated glass 15Annex B (informative) Market application testing . 16B.1 General . 16B.2 Sampling 16B.2.1 General . 16B.2.2 ITT for system manufacturer . 16B.2.3 Test results to be used for extended applications (EXAP) 16B.2.4 Non-sampled test results . 16Bibliography . 18
15、BS EN 15998:2010EN 15998:2010 (E) 3 Foreword This document (EN 15998:2010) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical
16、text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible f
17、or identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fran
18、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15998:2010EN 15998:2010 (E) 4 Introduction According to mandate M/135 “Glass in bu
19、ilding“, one of the essential characteristics that may be claimed is Safety in case of fire Resistance to fire (for glass for use in a glazed assembly intended specifically for fire resistance). However, glass products cannot be tested and classified for fire resistance without being incorporated in
20、to a fire resistant glazed assembly. BS EN 15998:2010EN 15998:2010 (E) 5 1 Scope This European Standard specifies the testing methodology to be used for glass products that are claiming fire resistance. The methodology covers Initial Type Testing as defined in the relevant glass product standard. NO
21、TE This document provides guidance with the declaration of the characteristic, Safety in case of fire Resistance to fire (for glass for use in a glazed assembly intended specifically for fire resistance) for the CE marking. The same methodology can also be used to determine the performance classific
22、ation for market applications (see Annex B). The methodology covers all glass product types that may require testing and classification for fire resistance. Fire resistance testing covers end use applications for example: doors; partitions, walls (including curtain walling); floors, roofs; ceilings.
23、 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1363-1, Fire resistanc
24、e tests Part 1: General requirements EN 1363-2, Fire resistance tests Part 2: Alternative and additional procedures EN 1364-1, Fire resistance tests for non-loadbearing elements Part 1: Walls EN 1364-2, Fire resistance tests for non-loadbearing elements Part 2: Ceilings EN 1364-3, Fire resistance te
25、sts for non-loadbearing elements Part 3: Curtain walling Full configuration (complete assembly) EN 1365-1, Fire resistance tests for loadbearing elements Part 1: Walls EN 1365-2, Fire resistance tests for loadbearing elements Part 2: Floors and roofs EN 1634-1, Fire resistance and smoke control test
26、s for door, shutter and openable window assemblies and elements of building hardware Part 1: Fire resistance tests for doors, shutters and openable windows EN 13501-2:2007+A1:2009, Fire classification of construction products and building elements Part 2: Classification using data from fire resistan
27、ce tests, excluding ventilation services EN 15254-4, Extended application of results from fire resistance tests Non-loadbearing walls Part 4: Glazed constructions BS EN 15998:2010EN 15998:2010 (E) 6 3 Terms and definitions For the purposes of this document, the following terms and definitions apply.
28、 3.1 extended field of application EXAP outcome of a process (involving the application of defined rules that may incorporate calculation procedures) that predicts, for a variation of a product property and/or its intended end use application(s), a test result on the basis of one or more test result
29、(s) to the same test standard EN 13501-2:2007+A1:2009 3.2 fire-resistant glass glass product group, i.e. monolithic, multiple layers or insulating glass unit, that when used in a fire resistant glazed assembly can have its performance determined and classified in accordance with EN 13501-2 3.3 fire
30、performance classification result of a fire resistance test(s) expressed as required in EN 13501-2 NOTE 1 The classification is reported with respect to integrity (E), integrity and radiation (EW), integrity and insulation (EI), and loadbearing capacity and integrity (RE) and loadbearing capacity, i
31、ntegrity an insulation (REI). NOTE 2 The classification of a specific glass product will be one or more of E, EW, EI, RE, REI NOTE 3 The time obtained for different classifications may be different, e.g. EW 30, EI 20. 3.4 framing system frame profile and fixings to the supporting structure (e.g. wal
32、l) NOTE See Figure 1, B. BS EN 15998:2010EN 15998:2010 (E) 7 Key A glazing system B framing systems Framing system consisting of: 1 frame; 2 metal anchor, screwed or bolted to the wall 4 by a fixing anchor 3; 3 screw and fixing anchor; 4 wall. Glazing system consisting of: 5 bead, screwed or clipped
33、; 6 bead fixing; 7 glazing strip; 8 glass; 9 sealing of gasket; 10 setting block. Figure 1 Fire resistant metal framing and glazing system BS EN 15998:2010EN 15998:2010 (E) 8 3.5 glazed assembly fire-resistant glass together with the framing system and glazing materials subjected to the fire resista
34、nce test NOTE 1 Also referred to as glazed element, glazed construction, glazed screen. NOTE 2 See Figure 1. 3.6 glazing system fire-resistant glass together with the glazing materials used in the fire resistance test to glaze the glass into its framing system NOTE See Figure 1, A. 3.7 glazing mater
35、ials materials used to glaze the fire-resistant glass into its frame, e.g. glazing strips, beads and bead fixings, setting blocks, gaskets and sealant 3.8 historic data test data obtained by tests previously performed in accordance with the European Standard with the following provisos: same product
36、, same characteristic(s), same or more onerous test method, sampling method and attestation of conformity 3.9 initial type testing ITT determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardiz
37、ed, tabulated or general accepted values, standardized or recognized calculation methods, test reports when made available, etc.), in accordance with this European Standard that demonstrates compliance with this European Standard NOTE The European Standard referred to is the applicable “Evaluation o
38、f conformity/product standard” for the glass product under consideration, e.g. EN 1279-5; EN 12150-2; EN 13024-2; EN 14449. 3.10 reference test fire resistance test in accordance with the appropriate standard (see 4.3), on which the extended application is based and the results of which are used as
39、the main source of data for the extended application NOTE 1 This test may also be used as the initial type test to support CE marking of fire-resistant glass or as a market application test. In each case, Annex ZA of the product standard should be considered: e.g. involvement of a Notified Certifica
40、tion Body, sample traceability, product sampling (when necessary) and checks of the factory production control. NOTE 2 The reference test provides the main source of data to determine the following: performance rating (integrity, integrity with radiation or integrity with insulation); maximum pane a
41、rea and dimensions for the fire-resistant glass; maximum dimensions of the fire-resistant glazed element for each type of frame material. NOTE 3 The reference test may also provide other data to assist in determining, through EXAP rules, the following: permitted dimensional changes to the framing sy
42、stem; any changes to the glazing system. BS EN 15998:2010EN 15998:2010 (E) 9 3.11 test report document that covers the results of tests undertaken on a representative sample of the product from production or on a prototype design of the product NOTE This definition comes from an “Evaluation of confo
43、rmity/product standard”. 3.12 technical file document, produced and maintained by the manufacturer, that contains all relevant information dealing with product traceability/testing/manufacture, etc. 3.13 virtual assembly glazed assembly that is defined by the glass manufacturer for the Initial Type
44、Testing of the characteristic “Safety in case of fire Resistance to fire (for glass for use in a glazed assembly intended specifically for fire resistance)“ NOTE 1 The acceptable components and the scope of application for the “Virtual Assembly“ are those defined by the relevant classification repor
45、t. NOTE 2 Classification is in accordance with EN 13501-2 and based upon: a) fire resistance test(s) for direct application; or b) for extended application according to EXAP rules. 4 Principles 4.1 General According to EN 357:2004, 5.1, the fire resistance classification shall be related to the comp
46、lete glazed element which incorporates the glass products and all given dimensions and tolerances. Therefore the principle is established that the glass shall be fitted into a framing system, complete with seals and mounting and fixing arrangements. Therefore as a consequence the glass cannot be cla
47、ssified on its own. The classification relates to a complete glazed assembly. The glazed assembly is tested in accordance with the applicable test method (see 4.3). The determination of the fire resistance classification is primarily undertaken for two separate reasons: determination of the fire res
48、istance performance of the glass product as one of its characteristics for regulatory marking (see 4.2); determination of the fire resistance performance of a glazed assembly for specific market applications (see Annex B). NOTE A test may satisfy both of the above items. 4.2 Testing to determine fir
49、e resistance as a product characteristic for a glass According to any of the “Evaluation of conformity/product standards“ for glass the characteristic “Safety in case of fire Resistance to fire (for glass for use in a glazed assembly intended specifically for fire resistance)“ can be determined and classified in accordance with EN 13501-2. Therefore the testing shall be undertaken on a complete fire resistant glazed assembly. This requ
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1