EN 16025-1-2013 en Thermal and or sound insulating products in building construction - Bound EPS ballastings - Part 1 Requirements for factory premixed EPS dry plaster《土木建筑中隔热和 或隔音.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16025-1:2013Thermal and/or soundinsulating products in buildingconstruction Bound EPSballastingsPart 1: Requirements for factory premixedEPS dry plasterBS EN 16025-1:2013 B

2、RITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16025-1:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/72, Rigid cellular materials.A list of organizations represented on this committee can beobtained on request to its secret

3、ary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 69114 0ICS 91.100.60Compliance with a British Standard cannot con

4、fer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013.Amendments issued since publicationDate Text affectedBS EN 16025-1:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16025-1 May 2013 ICS 91.

5、100.60 English Version Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster Produits isolants thermiques et/ou acoustiques utiliss dans la construction des btiments - Empierrements en PSE li - Partie 1:

6、exigences pour un pr-mlange en usine pltre sec PSE Wrmedmmstoffe fr den Wrme- und/oder Schallschutz im Hochbau - Gebundene EPS-Schttungen - Teil 1: Anforderungen an den werkmig vorgemischten EPS-Trockenmrtel This European Standard was approved by CEN on 23 February 2013. CEN members are bound to com

7、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELE

8、C Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the s

9、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

10、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All

11、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16025-1:2013: EBS EN 16025-1:2013EN 16025-1:2013 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions, symbols and abbreviated terms .6 3.1 Terms and defi

12、nitions .6 3.2 Symbols and abbreviated terms 7 3.2.1 Symbols 7 3.2.2 Abbreviated terms .7 4 Requirements .7 4.1 General 7 4.2 For all applications 8 4.2.1 Factory premixed EPS dry mortar 8 4.2.2 Fresh mortar .9 4.2.3 Bound EPS .9 4.3 For specific applications 10 4.3.1 General . 10 4.3.2 Compressive

13、stress 10 4.3.3 Compressibility . 12 4.3.4 Creep 12 4.3.5 Water vapour diffusion resistance 12 4.3.6 Water absorption by short-term partial immersion . 12 4.3.7 Dynamic stiffness . 13 4.3.8 Reaction to fire of products in standardised assemblies simulating end-use applications 13 4.3.9 Continuous gl

14、owing combustion 13 4.3.10 Dangerous substances 13 5 Test methods . 14 5.1 Sampling and preparation of test specimens 14 5.1.1 Factory premixed EPS dry mortar . 14 5.1.2 Bound EPS 14 5.2 Preparation of test specimen 14 5.3 Test results 14 6 Designation code 16 7 Evaluation of conformity 16 7.1 Gener

15、al . 16 7.2 Initial type testing . 17 7.3 Factory production control 17 8 Marking and labelling and technical information 17 8.1 Marking and labelling . 17 8.2 Technical information 17 Annex A (normative) Determination of the declared thermal conductivity 19 A.1 General . 19 A.2 Input data . 19 A.3

16、Declared value of thermal conductivity 19 Annex B (normative) Initial type testing (ITT) and factory production control (FPC) . 21 B.1 Testing frequencies 21 B.2 Indirect testing 23 BS EN 16025-1:2013EN 16025-1:2013 (E) 3 Annex C (normative) Testing for reaction to fire of products 24 C.1 Scope 24 C

17、.2 Product and installation parameters . 24 C.3 Standardised Mounting and fixing 25 C.4 Fixing of the test specimen 26 C.5 Field of application 27 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 29 ZA.1 Scope and relevant

18、 characteristics . 29 ZA.2 Procedure for attestation of factory made bound EPS products . 31 ZA.3 CE marking and labelling 34 Bibliography 36 BS EN 16025-1:2013EN 16025-1:2013 (E) 4 Foreword This document (EN 16025-1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materi

19、als and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn at the latest by No

20、vember 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the Europ

21、ean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document consists of two parts which form a package: EN 16025-1, Thermal a

22、nd/or sound insulating products in building construction Bound EPS ballastings Part 1: Requirements for factory premixed EPS dry plaster EN 16025-2, Thermal and/or sound insulating products in building construction Bound EPS ballastings Part 2: Processing of the factory premixed EPS dry plaster The

23、first part is the harmonised part satisfying the mandate and the CPD and is the basis for the CE marking covering the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. Both parts need to be used for the a

24、pplication of the insulation product in the end-use applications covered by the standard. This document is one of a series for mineral wool, expanded clay, expanded perlite, exfoliated vermiculite, polyurethane/polyisocyanurate, cellulose, bound EPS and expanded polystyrene in-situ formed insulation

25、 products used in buildings, but this document may be used in other areas where appropriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According

26、to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gree

27、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16025-1:2013EN 16025-1:2013 (E) 5 1 Scope This European Standard specifies the requirements

28、 for in-situ formed bound EPS products (BEPS) for the thermal and/or sound insulation of buildings when applied to walls, ceilings, roofs and floors. This European Standard covers products which are manufactured as premixed EPS dry plaster/mortar in a factory or mobile production unit. This European

29、 Standard is a specification for the bound EPS products before installation. This European Standard describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity. This European Standard does not specify the required class

30、or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal conductivity at 10 C greater

31、than 0,18 W/(m K) are not covered by this European Standard. This European Standard does not cover factory made insulation products in the form of prefabricated shapes or boards made of bound EPS. This European Standard also specifies performance requirements for airborne sound insulation and for ac

32、oustic absorption applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc

33、ed document (including any amendments) applies. EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 933-1, Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution Sieving method EN 1097-3, Tests for mechan

34、ical and physical properties of aggregates Part 3: Determination of loose bulk density and voids EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1

35、609:2013, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12086:2013, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12350-6, Testing fresh concrete Part 6: Dens

36、ity EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulating products EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Product

37、s of high and medium thermal resistance BS EN 16025-1:2013EN 16025-1:2013 (E) 6 EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172

38、:2012, Thermal insulation products Evaluation of conformity EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13823:2010, Reaction to fire tests for building products Building products excluding floorings e

39、xposed to the thermal attack by a single burning item EN 29052-1, Acoustics Determination of dynamic stiffness Part 1: Materials used under floating floors in dwellings EN ISO 9229:2007, Thermal insulation Vocabulary (ISO 9229:2007) EN ISO 11925-2, Reaction to fire tests Ignitability of products sub

40、jected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2) 3 Terms and definitions, symbols and abbreviated terms 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 9229:2007 and the following apply. 3.1.1 fresh mortar EPS

41、 dry mortar mixed with water on the construction site 3.1.2 bound EPS (BEPS) installed and hardened fresh mortar for use as insulating material for thermal and/or impact noise insulation 3.1.3 class combination of two levels of the same or different property between which the performance falls, wher

42、e the levels are given by the declared value of the characteristic concerned 3.1.4 level given value, which is the upper or lower limit of a requirement Note 1 to entry: The level is given by the declared value of the characteristic concerned. 3.1.5 factory premixed EPS dry mortar loose dry mixture

43、of EPS aggregate and mineral binder for producing bound EPS BS EN 16025-1:2013EN 16025-1:2013 (E) 7 3.2 Symbols and abbreviated terms 3.2.1 Symbols C compressibility mm dBthickness of the specimen under a load of 2 kPa after removal of an additional load of 48 kPa mm dLthickness of the specimen unde

44、r a load of 250 Pa mm dNnominal thickness of the product mm ctcompressive creep % ttotal relative thickness reduction % 90/9090 % fractile with a confidence level of 90 % for the thermal conductivity W/(m K) Ddeclared value of thermal conductivity W/(m K) Udesign value of thermal conductivity W/(m K

45、) water vapour diffusion resistance factor 1 s dynamic stiffness MN/m32compressive stress at 2 % deformation kPa 10compressive stress at 10 % deformation kPa ccompressive stress kPa Wpwater absorption by short-term partial immersion kg/m2CC(i1/i2/25)cdeclared level for compressive creep CP declared

46、level for compressibility CS(2) declared level for compressive stress at 2 % deformation CS(10) declared level for compressive stress at 10 % deformation DLT declared level for dimensional stability under load and temperature conditions DMD bound EPS density FMD apparent density of fresh mortar LD b

47、ulk density of the EPS dry mortar MU declared range of the water vapour resistance factor PS particle size group SD declared level for dynamic stiffness 3.2.2 Abbreviated terms BEPS Bound EPS EPS Expanded PolyStyrene ITT Initial Type Test 4 Requirements 4.1 General Product properties shall be assess

48、ed in accordance with Clause 5. To comply with this document, products shall meet the requirements of 4.2, and the requirements of 4.3 as appropriate. BS EN 16025-1:2013EN 16025-1:2013 (E) 8 One test result for a product property is the average of the measured values on the number of test specimens

49、given in Table 8. 4.2 For all applications 4.2.1 Factory premixed EPS dry mortar 4.2.1.1 Type of EPS aggregate The manufacturer shall identify the type of EPS aggregate. With regard to the type of aggregate, a differentiation shall be made between freshly foamed EPS indicated by N (= new) and ground EPS indicated by R (= recycled). In a visual inspection, the EPS aggregate shall be checked for foreign substances and lumps. These shall be removed from the aggregate. 4.2.1.2 Particle size gro