EN 16034-2014 en Pedestrian doorsets industrial commercial garage doors and openable windows - Product standard performance characteristics - Fire resisting and or smoke control ch.pdf

1、BSI Standards PublicationBS EN 16034:2014Incorporating corrigendum October 2014BS EN 16034:2014Pedestrian doorsets, industrial,commercial, garage doorsand openable windows Product standard, performancecharacteristics Fire resistingand/or smoke controlcharacteristicsBS EN 16034:2014 BRITISH STANDARDN

2、ational forewordThis British Standard is the UK implementation of EN 16034:2014.Users attention is drawn to the fact that fabric curtains tested in this standard only apply to the fire door sets fire text. This standard does not cover their operation deployment speeds, initiation devices or warning

3、devices, etc. and as such should comply with BS 8524-1 and BS 8524-2.The UK participation in its preparation was entrusted to Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling.A list of organizations represented on this committee can be obtained on request to its secr

4、etary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 88320 0ICS 13.220.50; 91.060.50Compliance with a British Sta

5、ndard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate Text affected31 October 2014 Additional National Foreword text inserted on

6、National Foreword pageBS EN 16034:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16034 October 2014 ICS 13.220.50; 91.060.50 English Version Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/o

7、r smoke control characteristics Blocs-portes pour pitons, portes et fentres industrielles, commerciales et de garage - Norme de produit, caractristiques de performance - Caractristiques de rsistance au feu et/ou dtanchit aux fumes Tren, Tore und Fenster - Produktnorm, Leistungseigenschaften - Feuer-

8、 und/oder Rauchschutzeigenschaften This European Standard was approved by CEN on 7 August 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d

9、ate lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

10、n under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo

11、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMI

12、T EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16034:2014 EBS EN 16034:2014EN 16034:2014 (E) 2 Content

13、s Page Foreword 3 Introduction .4 1 Scope 6 1.1 General 6 1.2 Exclusions 7 2 Normative references 7 3 Terms and definitions .8 4 Products characteristics .9 4.1 Resistance to fire (for fire compartmentation uses) 9 4.2 Smoke control (only for applications where limitation of smoke spread is required

14、) .9 4.3 Ability to release 9 4.4 Self-closing (only for self-closing fire resistant and/or smoke control doorsets and/or openable windows) 9 4.5 Durability 9 5 Testing, assessment and sampling methods 12 5.1 Resistance to fire (for fire compartmentation uses) . 12 5.2 Smoke control (only for applic

15、ations where limitation of smoke spread is required) 12 5.3 Ability to release . 12 5.4 Durability . 12 6 Assessment and verification of constancy of performance - AVCP . 12 6.1 General . 12 6.2 Type testing . 12 6.3 Factory production control (FPC) . 15 7 Marking, labelling and packaging . 19 Annex

16、 A (normative) Pre-test conditioning . 20 A.1 General . 20 A.2 Before the resistance to fire test . 20 A.3 Before the smoke control test . 21 A.4 Self-closing test 21 Annex B (informative) Installation provisions . 23 Annex ZA (informative) Clauses of this European Standard addressing the provisions

17、 of the EU Construction Products Regulation . 24 ZA.1 Scope and relevant characteristics 24 ZA.2 Procedure for AVCP of fire resisting and/or smoke control doorsets and /or openable windows . 25 ZA.3 CE marking and labelling . 29 Bibliography . 32 BS EN 16034:2014EN 16034:2014 (E) 2 Contents Page For

18、eword 3 Introduction .4 1 Scope 6 1.1 General 6 1.2 Exclusions 7 2 Normative references 7 3 Terms and definitions .8 4 Products characteristics .9 4.1 Resistance to fire (for fire compartmentation uses) 9 4.2 Smoke control (only for applications where limitation of smoke spread is required) .9 4.3 A

19、bility to release 9 4.4 Self-closing (only for self-closing fire resistant and/or smoke control doorsets and/or openable windows) 9 4.5 Durability 9 5 Testing, assessment and sampling methods 12 5.1 Resistance to fire (for fire compartmentation uses) . 12 5.2 Smoke control (only for applications whe

20、re limitation of smoke spread is required) 12 5.3 Ability to release . 12 5.4 Durability . 12 6 Assessment and verification of constancy of performance - AVCP . 12 6.1 General . 12 6.2 Type testing . 12 6.3 Factory production control (FPC) . 15 7 Marking, labelling and packaging . 19 Annex A (normat

21、ive) Pre-test conditioning . 20 A.1 General . 20 A.2 Before the resistance to fire test . 20 A.3 Before the smoke control test . 21 A.4 Self-closing test 21 Annex B (informative) Installation provisions . 23 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU

22、 Construction Products Regulation . 24 ZA.1 Scope and relevant characteristics 24 ZA.2 Procedure for AVCP of fire resisting and/or smoke control doorsets and /or openable windows . 25 ZA.3 CE marking and labelling . 29 Bibliography . 32 BS EN 16034:2014EN 16034:2014 (E) 3 Foreword This document (EN

23、16034:2014) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endor

24、sement, at the latest by April 2015 and conflicting national standards shall be withdrawn at the latest by October 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identify

25、ing any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports basic work requirements of Regulation (EU) 305/2011. For relationship with Regulation (EU) 305/2011, see informative Annex

26、ZA which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, For

27、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16034:2014EN 16034:2014 (E) 4 Intr

28、oduction This European Standard is one of a series of standards covering windows and pedestrian doorsets, industrial, commercial and garage doors and gates. This European Standard covers only fire resisting and/or smoke control characteristics including the ability to release and self-closing, furth

29、er product characteristics are covered in the relevant harmonized European Product Standards EN 14351-1, prEN 14351-2, EN 13241-1 and EN 16361. Figure 1 explains the relation between the standards, where the grey lines show the relationship of other harmonized product standards to EN 16034 (requirem

30、ents additional to fire resistance and smoke control characteristics) and the black lines explain the relationship to fire resistance and smoke control test, classification and extended application of test results standards. For the purposes of this European Standard the term doorset and openable wi

31、ndow is used as a general term unless clearly stated. BS EN 16034:2014EN 16034:2014 (E) 4 Introduction This European Standard is one of a series of standards covering windows and pedestrian doorsets, industrial, commercial and garage doors and gates. This European Standard covers only fire resisting

32、 and/or smoke control characteristics including the ability to release and self-closing, further product characteristics are covered in the relevant harmonized European Product Standards EN 14351-1, prEN 14351-2, EN 13241-1 and EN 16361. Figure 1 explains the relation between the standards, where th

33、e grey lines show the relationship of other harmonized product standards to EN 16034 (requirements additional to fire resistance and smoke control characteristics) and the black lines explain the relationship to fire resistance and smoke control test, classification and extended application of test

34、results standards. For the purposes of this European Standard the term doorset and openable window is used as a general term unless clearly stated. BS EN 16034:2014EN 16034:2014 (E) 5 Figure 1 Relationship between various standards EN 14351-1 (Harmonized standard) Doors and win-dows - External pedes

35、trian doorsets and windows Prod-uct standard prEN 14351-2 (Harmonized standard) Doors and win-dows - Internal pedestrian doorsets Prod-uct standard EN 16034 (Harmonized standard) Doors with re-sistance to fire and/or smoke control Product standard EN 13241-1 (Harmonized standard) Industrial, com-mer

36、cial and gar-age doors and gates Product standard EN 16361 (Harmonized standard) Power operated pedestrian doors Product standard EN 1634-1 (Test standard) Part 1: Fire re-sistance test for doors, shutters and openable windows EN 1634-3 (Test standard) Part 3: Smoke control doors and shutters EN 119

37、1 (Test standard) Windows and doors - Re-sistance to re-peated opening and closing EN 12605 (Test standard) Industrial, com-mercial and gar-age doors and gates - Mechani-cal aspects EN 13501-2 (Classification standard) Part 2: Fire classi-fication of con-struction products - Classification EN 15725

38、(EXAP) Extended applica-tion reports on the fire performance of construction products and building elements EN 15269- (EXAP) Extended application of test results for fire re-sistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware

39、- Part EN 16035 (HPS) Hardware perfor-mance sheet - Identification and summary of test evidence to facili-tate the inter-changeability of building hardware BS EN 16034:2014EN 16034:2014 (E) 6 1 Scope 1.1 General This European Standard identifies material independent, safety and performance requireme

40、nts applicable to all fire resisting and/or smoke control products intended to be used in fire and/or smoke compartmentation and/or escape routes, which are either: industrial, commercial and/or garage doorsets, rolling shutters or operable fabric curtains intended for the installation in areas in t

41、he reach of persons and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons, or rolling shutters or operable fabric curtains used in retail premises which are mainly provided for the access of persons rather than vehicles or goods, or pedes

42、trian doorsets and/or openable windows and/or inspection hatches which are hinged or sliding, intended for the installation in areas in the reach of persons, and for which the main intended uses are giving safe access for persons and which are manually or power operated and: opening and self closing

43、 as a normal mode of operation, or normally held open but self closing in case of fire or smoke, or normally maintained locked in the closed position (e. g. service access/inspection doorsets), and completed: with building hardware, with or without any side panel(s), flush over panel(s) and/or trans

44、om panel(s) (with or without glazing) and contained within a single perimeter frame for inclusion in a single aperture, with or without any vision panel(s) in the door leaf or leave(s), with or without any seals (e.g. for smoke control, fire resistance, draught, acoustic or weather characteristics).

45、 Product characteristics covered in EN 13241-1, EN 14351-1, prEN 14351-2 or EN 16361 will not compromise the fire resistance and/or smoke control characteristics of a fire resisting and/or smoke control product. NOTE 1 Requirements included in EN 14351-1, prEN 14351-2, EN 13241-1 or EN 16361 might b

46、e relevant for the products covered by this standard. This standard also provides indications on the product modifications not affecting the performances of the concerned products. NOTE 2 The requirements and rules for variations (regarding the direct and extended field of applications) of fire resi

47、stance and/or smoke control doorsets are given in the EN 15269 series and EN 1634-1 and EN 1634-3, supported by, e.g. EN 16035. BS EN 16034:2014EN 16034:2014 (E) 6 1 Scope 1.1 General This European Standard identifies material independent, safety and performance requirements applicable to all fire r

48、esisting and/or smoke control products intended to be used in fire and/or smoke compartmentation and/or escape routes, which are either: industrial, commercial and/or garage doorsets, rolling shutters or operable fabric curtains intended for the installation in areas in the reach of persons and for

49、which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons, or rolling shutters or operable fabric curtains used in retail premises which are mainly provided for the access of persons rather than vehicles or goods, or pedestrian doorsets and/or openable windows and/or inspection hatches which are hinged or sliding, intended for the installation in areas in the reach of persons, and for which the main intended uses are giving safe access for persons and which are manually o