EN 16116-1-2013 en Railway applications - Design requirements for steps handrails and associated access for staff - Part 1 Passenger vehicles luggage vans and locomotives《铁路应用设施 台阶.pdf

1、BSI Standards PublicationBS EN 16116-1:2013Railway applications Design requirements for steps,handrails and associated accessfor staffPart 1: Passenger vehicles, luggage vansand locomotivesBS EN 16116-1:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16116-

2、1:2013.The UK participation in its preparation was entrusted to TechnicalCommittee RAE/4/-/2, Railway Applications - Structural requirementsand Welding.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all th

3、e necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 69076 1ICS 45.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standar

4、d was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments issued since publicationDate Text affectedBS EN 16116-1:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16116-1 September 2013 ICS 45.060.20 English Version Railway applications

5、 - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, luggage vans and locomotives Applications ferroviaires - Exigences pour la conception desmarchepieds, poignes et accs destins au personnel - Partie 1: Vhicules voyageurs, fourgons bagages et loc

6、omotives Bahnanwendungen - Konstruktionsanforderungen an Tritte, Handgriffe und zugehrige Zugnge fr das Personal - Teil 1: Personenfahrzeuge, Gepckwagen und Lokomotiven This European Standard was approved by CEN on 29 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulation

7、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. Th

8、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN mem

9、bers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

10、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any fo

11、rm and by any means reserved worldwide for CEN national Members. Ref. No. EN 16116-1:2013: EBS EN 16116-1:2013EN 16116-1:2013 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 General requirements for steps and handrails .6 5 Requirements

12、for handling screw couplings with side buffers 8 5.1 General 8 5.2 Shunters stand 9 5.3 Steps .9 5.3.1 Shunters step 9 5.3.2 Steps at corners of shunting powered units . 10 5.4 Handrails 10 5.4.1 Shunter handrail . 10 5.4.2 Handrails corresponding to shunters stand . 11 5.4.3 Handrails for steps at

13、corners of shunting powered units 11 5.5 Transverse platform for shunting powered units 11 6 Reserved spaces. 11 6.1 General . 11 6.2 Space for shunting staff operation . 11 6.2.1 Space for shunter during coupling (Berne Rectangle) . 11 6.2.2 Space for the shunter during temporary travel . 12 6.2.3

14、Clearance for draw hook 13 7 External access to vehicles with a drivers cab 13 7.1 General . 13 7.2 Steps 14 7.3 Handrails and door handles 15 7.4 Additional requirements for passenger entrance doors used for access to drivers cab 16 8 Access to other equipment 16 8.1 General . 16 8.2 Steps 16 8.3 H

15、andrails 17 Annex A (informative) Gratings 18 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EC Directive 2008/57/EC . 20 Bibliography . 22 BS EN 16116-1:2013EN 16116-1:2013 (E) 3 Foreword This document (EN 16116-1:2013) has been prepared by Tech

16、nical Committee CEN/TC 256 “Railway Applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be

17、withdrawn at the latest by March 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate

18、 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this document. This European standard is part of the

19、 series EN 16116, Railway applications Design requirements for steps, handrails and associated access for staff, which consists of the following parts: Part 1: Passenger vehicles, luggage vans and locomotives; Part 2: Freight wagons. According to the CEN-CENELEC Internal Regulations, the national st

20、andards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

21、 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16116-1:2013EN 16116-1:2013 (E) 4 Introduction Locomotives, luggage vans and passenger rolling stock are designed so that staff are not exposed to

22、undue risk during coupling and access to the vehicle or to special equipment. It is therefore essential to define common requirements for rolling stock. BS EN 16116-1:2013EN 16116-1:2013 (E) 5 1 Scope This European Standard specifies the minimum ergonomic and structural integrity requirements for st

23、eps and handrails used by railway staff to access passenger vehicles, luggage vans, locomotives and power units of rolling stock. It also applies to passenger-rated car carriers. This European Standard defines the required spaces necessary for handling of screw couplings with side buffers, shunter h

24、andrails and shunters stand. For staff access, it defines footsteps, handrails and their dimensions and free spaces. To fulfil the requirements for loads which are applied by the staff, it defines dimensions and requirements for materials or design loads. It also defines the general requirements of

25、steps and handrail for access to external equipment, for example windscreens, wipers or external lights. This European Standard does not cover on track machines (mobile railway infrastructure construction and maintenance equipment) and tram-trains. 2 Normative references The following documents, in

26、whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 131 (all parts), Ladders EN 1002

27、5-2:2004, Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels EN 14752:2005, Railway applications Bodyside entrance systems EN 15085 (all parts), Railway applications Welding of railway vehicles and components EN 15273 (all parts), Railway a

28、pplications Gauges EN 16116-2, Railway applications Design requirements for steps, handrails and associated staff access Part 2: Freight wagons 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 clearance defined free space which is needed to en

29、sure space for the correct functioning of, and safety when handling, devices 3.2 step footstep with defined properties solely for staff use 3.3 shunter shunting staff who couple and uncouple vehicles and direct movements BS EN 16116-1:2013EN 16116-1:2013 (E) 6 3.4 shunters step specific step used fo

30、r the shunters stand 3.5 handrail handrail with defined properties solely for staff use 3.6 shunter handrail specific handrail fitted at headstock under each buffer 3.7 shunters stand shunters step in combination with handrail for the specific use of shunting staff to allow travel outside the vehicl

31、e during shunting 3.8 reserved spaces defined free space which is needed to ensure safe working conditions for the shunting staff during coupling and uncoupling of screw couplings 3.9 safe working position position for the shunter allowing sight for directing driving during shunting operations Note

32、1 to entry: These positions may be: a shunters stand, a platform, a step with a corresponding handrail, the drivers cab or vestibule of a passenger car with sight in the direction of travel. 4 General requirements for steps and handrails Steps and handrails shall withstand the loads applied by staff

33、. For confidence in the safety of steps and handrails an appropriate stiffness should be provided. The corresponding stiffness criteria (permissible elastic deformation under load) for steps and handrails are optional and should be defined in the specification. The following requirements shall be de

34、monstrated by analyses or tests: steps used as a safe working position for the shunter shall be able to withstand separately acting forces of 2 kN vertically and 1,5 kN laterally or longitudinally, applied by staff at any point without causing permanent deformation to it or its fixings, other steps

35、shall be capable of withstanding separately acting forces of 1,5 kN vertically and 1,5 kN laterally or longitudinally, applied by staff at any point without causing permanent deformation to it or its fixings, BS EN 16116-1:2013EN 16116-1:2013 (E) 7 handrails shall be capable of withstanding a force

36、applied by staff of 1,5 kN at any point in any direction without causing permanent deformation to it or its fixings. When demonstrated by tests it is recommended that the component is preloaded to stabilise any residual stresses induced during manufacture and the maximum force is applied at least tw

37、ice. The results of the final tests shall not show permanent deformations. Handrails shall not have any sharp edges; where handrails have a rectangular section the corners shall be rounded. Unless otherwise specified in this standard, the cross sectional dimensions shall be: for round shape between

38、20 mm and 35 mm or for oval shape: minimum dimension of 12 mm thickness and 35 mm width and maximum dimension of 40 mm. Unless otherwise specified in this standard, the handrails should have a minimum clearance of 100 mm that may be reduced to a minimum of 40 mm if necessary. Steps and handrails use

39、d by staff shall be secured as follows: with positive locking or with bolts of adequate length and appropriate self-locking or with high-strength lock ring-bolts or welded into place in accordance with EN 15085. All steps shall be made with a non slip surface and shall not have sharp edges causing o

40、bstacles for the shoes of the staff. Steps or platforms used as a safe working position for the shunter, walkways and access steps to the platform and drivers cab at shunting powered units which could be covered with ice because they are not sheltered from weather conditions shall be made of metal g

41、ratings and fulfil the following criteria: 1) Resistance to friction: The average value of the coefficient of friction measured in 3 directions (lengthwise, widthwise and diagonally) shall reach the following minimum values: a) in dry and wet (water) condition: 0,65 b) in oiled condition: 0,30 Coeff

42、icient of friction values shall be ascertained by means of a 100 mm 100 mm movable plate, on which a rubber pad with 80 shore hardness shall be glued; this plate shall be loaded with a weight of 75 kg. For the measurements carried out with water and oil, the grating shall be fully immersed. 2) Grati

43、ng structure: To ensure that the gratings are sufficiently well-adapted to winter conditions, a ratio of at least 50 % of “void” area to total area shall be observed. Only apertures that can be penetrated by a ball-shaped object with a diameter of 10 mm and have a minimum area of 400 mm2shall be tak

44、en into account to determine this ratio. NOTE The “void” area is the free space afforded by the grating apertures in the vertical direction. Examples which fulfil the above criteria are given in Annex A. BS EN 16116-1:2013EN 16116-1:2013 (E) 8 Other steps which are not sheltered from weather conditi

45、ons should be sufficiently well-adapted to conditions in relation with their use. All dimensions given in this standard with respect to top of rail shall be derived for vehicles in working order standing on a horizontal track. 5 Requirements for handling screw couplings with side buffers 5.1 General

46、 Vehicles which have to be coupled to trains of variable consist by screw couplings shall provide: safe working positions for the shunter at each vehicle end fitted with screw couplings, a shunter handrail under each buffer and reserved spaces for safe operation by the shunter. A safe working positi

47、on shall be accessible from both sides of the vehicle from 200 mm below top of rail. If defined in the specification, a safe working position for the shunter may be omitted on the vehicle (e.g. dining cars or sleeping cars with side end doors only on one vehicle end or according to national regulati

48、ons). In this case other operational solutions shall allow shunting of such vehicles and this shall be defined in the specification. On passenger coaches and luggage vans fitted with side end doors, where there are no outside handholds or steps for passengers, when the door is closed, special handra

49、ils and steps for shunters may be omitted. In this case, the inner handrails and the inner door steps shall serve as a working position for the shunter when the door is open. The shunter shall have the possibility to open the doors from outside or inside and sliding doors shall not cause danger to the shunter during the shunting process. Powered units that are exclusively or mainly intended for shunting purposes shall be provided at least at one end with a transverse platform accessible from both sides. Fo