EN 16153-2013 en Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs walls and ceilings - Requirements and test methods (Incorporates.pdf

1、BSI Standards PublicationLight transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings Requirements and test methodsBS EN 16153:2013BS EN 16153:2013+A1:2015BS EN 16153:2013+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the

2、UK implementation of EN 16153:2013+A1:2015. It supersedes BS EN 16153:2013, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN

3、 amendment A1 is indicated by .The UK participation in its preparation was entrusted by Technical Committee B/542, Roofing and cladding products for discontinuous laying, to Subcommittee B/542/8, Light transmitting plastics sheeting for roofing and cladding.A list of organizations represented on thi

4、s committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015 Published by BSI Standards Limited 2015ISBN 978 0 580 86022 5ICS

5、83.140.10; 91.060.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2013.Amendments/corrigenda issued since publicationDate Text affected31 May 2015 Imp

6、lementation of CEN amendment A1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16153:2013+A1 March 2015 ICS 83.140.10; 91.060.01 Supersedes EN 16153:2013English Version Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings -

7、Requirements and test methods Plaques dclairement multiparois et planes en polycarbonate (PC) pour usage intrieur ou extrieur dans les toitures, bardages et plafonds - Exigences et mthodes dessai Lichtdurchlssige, flache Stegmehrfachplatten aus Polycarbonat (PC) fr Innen- und Auenanwendungen an Dche

8、rn, Wnden und Decken - Anforderungen und Prfverfahren This European Standard was approved by CEN on 5 February 2013 and includes Amendment 1 approved by CEN on 24 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this E

9、uropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official vers

10、ions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria,

11、 Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, S

12、witzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nat

13、ional Members. Ref. No. EN 16153:2013+A1:2015 EEN 16153:2013+A1:2015 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions and symbols .7 3.1 Terms and definitions .7 3.2 Symbols . 11 4 Requirements 12 4.1 Visual appearance 12 4.2 Dimensions and mass

14、per unit area and their tolerances 13 4.3 Spectral characteristics . 14 4.4 Total solar energy transmittance 15 4.5 Impact resistance 15 4.6 Durability . 16 4.7 Deformation behaviour 17 4.8 Airborne sound insulation . 17 4.9 Thermal transmittance . 18 4.10 Water vapour permeability . 18 4.11 Water/a

15、ir tightness 18 4.12 Linear thermal expansion 18 4.13 Reaction to fire 18 4.14 External fire performance 18 4.15 Resistance to fire 19 4.16 Net heat of combustion 19 4.17 Presence of functional layers 19 4.18 Dangerous substances 19 4.19 Resistance to fixings 19 4.20 Temporary protective coverings .

16、 19 5 Test and calculation methods . 20 5.1 Dimensional tolerances and mass per unit area . 20 5.2 Total solar energy transmittance 25 5.3 Test method of exposure to artificial ageing . 29 5.4 Yellowness index 29 5.5 Small hard body impact resistance 30 5.6 Deformation behaviour 31 5.7 Airborne soun

17、d insulation . 42 5.8 Reaction to fire 43 6 Assessment and verification of constancy of performance AVCP 48 6.1 General . 48 6.2 Product type determination . 48 6.3 Factory production control (FPC) . 50 6.4 Initial inspection of factory and of FPC 52 6.5 Continuous surveillance of FPC . 53 7 Marking

18、 and labelling . 53 Annex A (normative) Magnification and reduction factors 55 A.1 General . 55 EN 16153:2013+A1:2015 (E) 3 A.2 Load duration . 55 A.3 Ageing and environmental influences 55 A.4 Influence of temperature . 55 A.5 Conversion factors 56 A.6 Marginal deformation 56 !Annex ZA (informative

19、) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 57 ZA.1 Scope and relevant characteristics . 57 ZA.2 Procedure for AVCP of light transmitting flat multiwall polycarbonate sheets 59 ZA.2.1 Systems of AVCP 59 ZA.2.2 Declaration of performance (D

20、oP) . 62 ZA.2.2.1 General 62 ZA.2.2.2 Content 63 ZA.2.2.3 Example of DoP 64 ZA.3 CE marking and labelling 66“ Bibliography 69 BS EN 16153:2013+A1:2015EN 16153:2013+A1:2015 (E)EN 16153:2013+A1:2015 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms, definitions

21、and symbols .7 3.1 Terms and definitions .7 3.2 Symbols . 11 4 Requirements 12 4.1 Visual appearance 12 4.2 Dimensions and mass per unit area and their tolerances 13 4.3 Spectral characteristics . 14 4.4 Total solar energy transmittance 15 4.5 Impact resistance 15 4.6 Durability . 16 4.7 Deformation

22、 behaviour 17 4.8 Airborne sound insulation . 17 4.9 Thermal transmittance . 18 4.10 Water vapour permeability . 18 4.11 Water/air tightness 18 4.12 Linear thermal expansion 18 4.13 Reaction to fire 18 4.14 External fire performance 18 4.15 Resistance to fire 19 4.16 Net heat of combustion 19 4.17 P

23、resence of functional layers 19 4.18 Dangerous substances 19 4.19 Resistance to fixings 19 4.20 Temporary protective coverings . 19 5 Test and calculation methods . 20 5.1 Dimensional tolerances and mass per unit area . 20 5.2 Total solar energy transmittance 25 5.3 Test method of exposure to artifi

24、cial ageing . 29 5.4 Yellowness index 29 5.5 Small hard body impact resistance 30 5.6 Deformation behaviour 31 5.7 Airborne sound insulation . 42 5.8 Reaction to fire 43 6 Assessment and verification of constancy of performance AVCP 48 6.1 General . 48 6.2 Product type determination . 48 6.3 Factory

25、 production control (FPC) . 50 6.4 Initial inspection of factory and of FPC 52 6.5 Continuous surveillance of FPC . 53 7 Marking and labelling . 53 Annex A (normative) Magnification and reduction factors 55 A.1 General . 55 EN 16153:2013+A1:2015 (E) 3 A.2 Load duration . 55 A.3 Ageing and environmen

26、tal influences 55 A.4 Influence of temperature . 55 A.5 Conversion factors 56 A.6 Marginal deformation 56 !Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 57 ZA.1 Scope and relevant characteristics . 57 ZA.2 Procedure for

27、AVCP of light transmitting flat multiwall polycarbonate sheets 59 ZA.2.1 Systems of AVCP 59 ZA.2.2 Declaration of performance (DoP) . 62 ZA.2.2.1 General 62 ZA.2.2.2 Content 63 ZA.2.2.3 Example of DoP 64 ZA.3 CE marking and labelling 66“ Bibliography 69 BS EN 16153:2013+A1:2015EN 16153:2013+A1:2015

28、(E)EN 16153:2013+A1:2015 (E) 4 Foreword This document (EN 16153:2013+A1:2015) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinous laying and products for wall cladding”, the secretariat of which is held by NBN. This European Standard shall be given the status

29、 of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by December 2016. Attention is drawn to the possibility that some of the elements of this document may be the su

30、bject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2014-11-24. This document supersedes EN 16153:2013. The start and finish of text introduced or altered by amendment is indica

31、ted in the text by tags ! “. !This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Construction Products Regulation 305/2011. For relationship with the EU Regulation 305/2011, se

32、e informative Annex ZA, which is an integral part of this document.“ According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

33、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 16153:2013+A1:2

34、015 (E) 5 Introduction This document describes the requirements for light transmitting flat multiwall PC sheets for internal and external use in walls, roofs and ceilings. It is applicable to the sheets for the delivery only. Reference should be made to national regulations and manufacturers literat

35、ure for requirements concerning the design, storage and fundamental guidance for installation of sheets, including all safety aspects. The standards and guideline addressing light transmitting flat multiwall PC sheets for building applications are the following: EN 1873, Prefabricated accessories fo

36、r roofing Individual roof lights of plastics Product specification and test methods (harmonised standard) EN 14963, Roof coverings Continuous rooflights of plastics with or without upstands Classification, requirements and test methods (harmonised standard) EOTA ETA-Guideline 010, Self supporting tr

37、anslucent roof kits The multiwall PC sheets that satisfy the requirements of this document are suitable for use as components in accordance with EN 1873, EN 14963 or EOTA ETA-Guideline 010. BS EN 16153:2013+A1:2015EN 16153:2013+A1:2015 (E)EN 16153:2013+A1:2015 (E) 4 Foreword This document (EN 16153:

38、2013+A1:2015) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinous laying and products for wall cladding”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical t

39、ext or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by December 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held res

40、ponsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2014-11-24. This document supersedes EN 16153:2013. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This document has been prepared un

41、der a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Construction Products Regulation 305/2011. For relationship with the EU Regulation 305/2011, see informative Annex ZA, which is an integral part of this docume

42、nt.“ According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France

43、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 16153:2013+A1:2015 (E) 5 Introduction This document describes the requirements

44、for light transmitting flat multiwall PC sheets for internal and external use in walls, roofs and ceilings. It is applicable to the sheets for the delivery only. Reference should be made to national regulations and manufacturers literature for requirements concerning the design, storage and fundamen

45、tal guidance for installation of sheets, including all safety aspects. The standards and guideline addressing light transmitting flat multiwall PC sheets for building applications are the following: EN 1873, Prefabricated accessories for roofing Individual roof lights of plastics Product specificati

46、on and test methods (harmonised standard) EN 14963, Roof coverings Continuous rooflights of plastics with or without upstands Classification, requirements and test methods (harmonised standard) EOTA ETA-Guideline 010, Self supporting translucent roof kits The multiwall PC sheets that satisfy the req

47、uirements of this document are suitable for use as components in accordance with EN 1873, EN 14963 or EOTA ETA-Guideline 010. BS EN 16153:2013+A1:2015EN 16153:2013+A1:2015 (E)EN 16153:2013+A1:2015 (E) 6 1 Scope This European Standard specifies the requirements for light transmitting flat multiwall p

48、olycarbonate (PC) sheets for internal and external use in walls, roofs and ceilings. This European Standard applies to light transmitting flat extruded multiwall PC sheets with or without functional layers (e.g. coating, co-extruded layer) made from PC-based or other materials, without filling mater

49、ials. It also specifies the test methods needed for the evaluation of conformity and marking of the sheets. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 410:2011, Glass in building Determination of luminous and solar characteristics of glazing EN 673, Glass in