EN 16578-2016 en Ceramics sanitary appliances - Sustainability assessment《陶瓷卫生用具 第1部 可持续发展评估》.pdf

1、BSI Standards PublicationBS EN 16578:2016Ceramics sanitary appliances Sustainability assessmentBS EN 16578:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16578:2016. The UK participation in its preparation was entrusted to TechnicalCommittee B/503, Sanitar

2、y appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published

3、by BSI Standards Limited 2016ISBN 978 0 580 82572 9 ICS 91.140.70 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued s

4、ince publicationDate T e x t a f f e c t e dBS EN 16578:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16578 February 2016 ICS 91.140.70 English Version Ceramics sanitary appliances - Sustainability assessmentAppareils sanitaires en cramique - Evaluation de durabilit Keramische Sanitrausst

5、attungsgegenstnde - Beurteilung der Nachhaltigkeit This European Standard was approved by CEN on 13 December 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

6、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language

7、 made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E

8、stonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR ST

9、ANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16578:2016 EBS EN 16578:2016EN 16578:

10、2016 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Assessment 8 4.1 General 8 4.2 Ecological criteria . 9 4.2.1 General 9 4.2.2 Parameters describing the resource use . 10 4.2.3 Parameters describing output flows and waste c

11、ategories 11 4.2.4 Parameters describing environmental impact . 12 4.2.5 Parameters describing the construction process. 18 4.2.6 Recycling potential 18 4.3 Economical criteria . 18 4.3.1 General . 18 4.3.2 Parameters describing the operational water use 19 4.3.3 Parameters describing the life cycle

12、 . 19 4.3.4 Parameters describing the energy management . 20 4.4 Social and functional criteria . 20 4.4.1 General . 20 4.4.2 User friendliness 20 4.4.3 Safety in use 21 4.4.4 Maintenance, repair and replacement . 21 5 Classification 21 6 Marking and product designation 22 Annex A (informative) Matr

13、ix of assessed data 23 A.1 Ecological criteria (see 4.2) 23 A.2 Economical criteria (see 4.3) . 24 A.3 Social and functional criteria (see 4.4) 25 Annex B (informative) Evaluation scheme. 26 B.1 General . 26 B.2 Evaluation of ecological criteria . 26 B.3 Evaluation of economical criteria 27 B.4 Eval

14、uation of social and functional criteria 27 B.5 Evaluation of the total rating . 27 Annex C (informative) Example for a table with typical values for the production of ceramic sanitary appliances 32 Bibliography . 34 BS EN 16578:2016EN 16578:2016 (E) 3 European foreword This document (EN 16578:2016)

15、 has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting na

16、tional standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document suppor

17、ts the unified approach for the assessment of sustainability of ceramic sanitary appliances, i.e. WC pans and WC suites, urinals, wash basins, bidets and communal washing troughs, in the light of the document CPR 06/10/1 of European Commission - Enterprise and Industry - Sustainable Industrial Polic

18、y and Construction. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Ma

19、cedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16578:2016EN 16578:2016 (E) 4 Introduction This European Stan

20、dard supports the (harmonized) European Standards on ceramic sanitary appliances elaborated by CEN/TC 163 on assessing the sustainability for these products. This European Standard provides a system for sustainability assessment of ceramic sanitary appliances using a life cycle approach, featuring q

21、ualitative and quantitative indicators for ecologic, economic and social performance of sanitary ceramic appliances. The purpose of this European Standard is to provide requirements and classification values for the assessment of the sustainability of ceramic sanitary appliances. Selected parameters

22、 assessed in accordance with this standard represent the main parameters defined in EN 15804. This European Standard may be used to support environmental building assessment and environmental product declarations (EPDs). The structure and the parameters of EN 15804 mandatory requirements from inform

23、ation modules A1 to A3 - are used as a basis for the ecological criteria of this European Standard. A system with sustainability classes has been introduced to express the performance of ceramic sanitary appliances. The link between these classes and the assessment of the products form a framework o

24、f evaluation schemes. Evaluation schemes enable the comparison of different ceramic sanitary appliances. NOTE EPDs based on EN 15804 are not comparative assertions (see EN 15804:2012+A1:2013, 5.1). These EPDs are necessary for environmental assessment of building only. BS EN 16578:2016EN 16578:2016

25、(E) 5 1 Scope This European Standard specifies sustainability requirements together with assessment methods and evaluation schemes for ceramic sanitary appliances, i.e. WC pans and WC suites in accordance with EN 997, urinals in accordance with EN 13407, wash basins in accordance with EN 14688, comm

26、unal washing troughs in accordance with EN 14296 and bidets in accordance with EN 14528. NOTE This European Standard may be applicable to other ceramic sanitary appliances. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indisp

27、ensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 997, WC pans and WC suites with integral trap EN 12056 (all parts), Gravity drainage systems inside building

28、s EN 13407, Wall-hung urinals - Functional requirements and test methods EN 14296, Sanitary appliances - Communal washing troughs EN 14528, Bidets - Functional requirements and test methods EN 14688, Sanitary appliances - Wash basins - Functional requirements and test methods 3 Terms and definitions

29、 For the purposes of this document, the following terms and definitions apply. 3.1 abiotic depletion potential for fossil resources measures the gradual depletion of non-renewable fossil resources Note 1 to entry: An example is raw oil. 3.2 abiotic depletion potential for non-fossil resources measur

30、es the gradual depletion of non-renewable non-fossil resources Note 1 to entry: An example is clay. 3.3 acidification potential of land and water sums contributions of sulphuric acid and nitric acid to acid rain, acid snow and acid deposition Note 1 to entry: It includes sulphur oxides (SO2, SO3) an

31、d nitrogen oxides (N2O, NO and NO2). 3.4 auxiliary production tool EXAMPLE Casting moulds, sponges and supports BS EN 16578:2016EN 16578:2016 (E) 6 3.5 ceramics inorganic non-metallic material which is typically moulded from raw materials at room temperature and gains its characteristic physical pro

32、perties during a firing process (after the moulding) Note 1 to entry: The term “ceramic materials for sanitary appliances” covers both vitreous china and fine fire clay materials. 3.6 construction product item manufactured or processed for incorporation in construction works SOURCE: EN 15804:2012+A1

33、:2013 3.7 consumption use of materials or energy within a defined time frame 3.8 cost in use expenses incurred while using the product 3.9 declared unit quantity of a construction product for use as a reference unit Note 1 to entry: Usual units for mass is t, for quantity is piece. 3.10 depletion po

34、tential of the stratospheric ozone layer measures depletion of stratospheric ozone needed for protection against UV radiation Note 1 to entry: This includes chlorofluorocarbons (CFCs). 3.11 energy management system to monitor, control and evaluate the type of power supply as well as the energy consu

35、mption of a product 3.12 eutrophication potential measures dissolved oxygen depletion by undesirable forms of biomass, such as algae Note 1 to entry: This includes various forms of nitrogen and phosphorus. 3.13 formation potential of tropospheric ozone photochemical oxidants puts all smog-producing

36、chemicals on the same equivalent 3.14 glazed ceramic ceramic body with a surface layer of silicon oxide compound applied before the firing process and chemically bonded during firing Note 1 to entry: The glaze deemed to be a part of the ceramics and not a separate coating. BS EN 16578:2016EN 16578:2

37、016 (E) 7 3.15 global warming potential puts all greenhouse gases on the same denominator Note 1 to entry: Greenhouse gases include CO2, CH4, N2O and CFCs. 3.16 gypsum dehydrate natural gypsum as used for plaster moulds 3.17 hazardous substance solid, liquid or gas that can harm people, other living

38、 organisms, property or the environment 3.18 life cycle consecutive and interlinked stages of a construction products life, from raw material acquisition or generation from natural resources to final disposal 3.19 maintenance all actions to maintain or repair in order a product to continue its decla

39、red function 3.20 production industrial process consisting of different steps in the manufacture of goods 3.21 production system collection of unit processes with elementary and product flows, performing one or more defined functions, and which determines the life cycle of a product 3.22 raw materia

40、l single material or a mixture of different materials (e.g. feedstock, ceramic body) as being the basic material of which a product is manufactured 3.23 recycling use of material as secondary material outside the boundary of the production system Note 1 to entry: Examples are recycled gypsum of plas

41、ter moulds. 3.24 renewable energy energy from renewable non-fossil sources Note 1 to entry: Non-fossil sources are, for example, wind, solar, aerothermal, geothermal, hydrothermal and ocean energy, hydropower, biomass, landfill gas, sewage treatment plant gas, electricity generation through exhaust

42、gas heat etc. 3.25 safety in use characteristic of the level of risks associated with the installation and use of the product BS EN 16578:2016EN 16578:2016 (E) 8 3.26 secondary fuel fuel recovered from previous use or from waste which substitutes primary fuels 3.27 secondary material material recove

43、red from previous use or from waste which substitutes primary materials Note 1 to entry: Secondary material is measured at the point where the secondary material enters the production system from another production system. Note 2 to entry: Materials recovered from previous use or from waste from one

44、 production system and used as an input in another production system are secondary materials e.g. use of milled scrap technical ceramics as raw material for ceramics sanitary appliances. Note 3 to entry: Examples for secondary materials (to be measured at the boundary of the production system) are r

45、ecycled sanitary appliances, tiles or technical ceramics. 3.28 transport movement of goods (e.g. products, raw materials) from one location to another 3.29 total production means the production of saleable ceramic sanitary appliances Note 1 to entry: Usual unit is t/a. 3.30 user friendly characteris

46、tic of the level of product ease of use 3.31 waste management collection, transport, processing, recycling or disposal of waste materials and their monitoring and recycling 3.32 water saving reduction in water use accomplished by implementation of water conservation, water reduction or water efficie

47、ncy measures 4 Assessment 4.1 General The criteria are based on the “three pillar model” of sustainability as stipulated in the World Summit Conference 2005 4. These “three pillars” (ecological, economic and social requirements) are generally used in terms of sustainability. NOTE 1 Pillar 1 “Ecologi

48、cal requirements” covers the applicable requirements from information modules A1 to A5 of EN 15804. Pillar 2 “Economical requirements” covers the applicable requirements from information modules B1, B6 and B7 of EN 15804. BS EN 16578:2016EN 16578:2016 (E) 9 Pillar 3 “Social requirements” covers furt

49、her applicable requirements from information modules B2 to B5 of EN 15804. This clause describes the detailed criteria and defines the requirements for the evaluation of the sustainability of ceramic sanitary appliances. NOTE 2 The assessment of ceramic sanitary appliances is based on applicable product category rules in accordance with EN 15804. The assessment shall be carried out per production site or per defined group/network of production sites (see Annex A). The assessment shall take into account at least 90 % of each input or output of material(s) or energy and a cor