1、BS EN 16584-2:2017Railway applications Design for PRM use General r e q u i r e m e n t sPart 2: InformationBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 16584-2:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16584-
2、2:2017.The UK committee draws users attention to the distinction between normative and informative elements, as defined in Clause 3 of the CEN/CENELEC Internal Regulations, Part 3.Normative: requirements conveying criteria to be fulfilled if compliance with the document is to be claimed and from whi
3、ch no deviation is permitted.Informative: information intended to assist the understanding or use of the document. Informative annexes do not contain requirements, except as optional requirements, and are not mandatory. For example, a test method may contain requirements, but there is no need to com
4、ply with these requirements to claim compliance with the standard.When speeds in km/h require unit conversion for use in the UK, users are advised to use equivalent values rounded to the nearest whole number. The use of absolute values for converted units should be avoided in these cases. In this st
5、andard the equivalent speed for 80 km/h should be taken to be 50 mph.The UK participation in its preparation was entrusted to Technical Committee RAE/1/-/15, Railway Applications - People with Reduced Mobility.A list of organizations represented on this committee can be obtained on request to its se
6、cretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 74359 7ICS 11.180.01; 45.020Compliance with a British Stand
7、ard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16584-2:2017EUROPEAN STANDARD NORME EUROPENNE EURO
8、PISCHE NORM EN 16584-2 January 2017 ICS 11.180.01; 45.020 English Version Railway applications - Design for PRM use - General requirements - Part 2: Information Applications ferroviaires - Conception destine lusage par les PMR: Exigences gnrales - Partie 2: Informations Bahnanwendungen - Gestaltung
9、fr die Nutzung durch PRM - Allgemeine Anforderungen - Teil 2: Informationen This European Standard was approved by CEN on 10 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nati
10、onal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A ver
11、sion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus,
12、Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
13、 Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16
14、584-2:2017 EBS EN 16584-2:2017EN 16584-2:2017 (E) 2 Contents PageEuropean foreword . 5 Introduction 6 1 Scope 7 2 Normative references 8 3 Terms and definitions . 8 4 Symbols and abbreviations 13 5 Requirements and assessment 13 5.1 General . 13 5.2 Infrastructure 13 5.2.1 Parking facilities for per
15、sons with disabilities and persons with reduced mobility 13 5.2.2 Obstacle free routes 14 5.2.3 Doors and entrances . 16 5.2.4 Ticketing, information desks and customer assistance points . 16 5.2.5 Visual information: signposting, pictograms, printed or dynamic information . 18 5.2.6 Spoken informat
16、ion . 20 5.2.7 Platform danger area and edges of platforms . 20 5.2.8 End of platforms . 21 5.2.9 Platform wheelchair boarding aid operational zone . 21 5.2.10 Level track crossings . 21 5.2.11 Displays 22 5.3 Rolling stock . 22 5.3.1 Seats 22 5.3.2 Wheelchair spaces . 23 5.3.3 Doors . 23 5.3.4 Toil
17、ets . 27 5.3.5 Customer information 28 5.3.6 Internal and external displays 34 5.3.7 Call for aid device . 35 5.3.8 Wheelchair accessible sleeping accommodation . 36 6 Methodologies . 37 6.1 Internal display scrolling speed and character display duration 37 6.1.1 General . 37 6.1.2 Methodology 37 An
18、nex A (normative) PRM signage 39 A.1 Infrastructure signs . 39 A.2 Rolling stock signs . 39 A.3 International wheelchair sign . 39 A.4 Inductive loop (coupling) sign . 40 A.5 Call for aid . 40 A.6 Priority seating signs 40 BS EN 16584-2:2017EN 16584-2:2017 (E) 3 Annex B (normative) Tactile character
19、istics . 42 B.1 Tactile pictograms and characters 42 B.2 Tactile controls . 43 B.3 Tactile feedback or tactile indication . 44 Annex C (normative) Eye point dimensions 45 Annex D (normative) Visual acuity for displays . 46 Annex E (normative) Specific braille Requirements 54 Annex F (normative) Char
20、acteristics of easily readable . 55 Annex G (normative) Passenger external doors audible signals . 59 G.1 General . 59 G.2 Door opening - Characteristics 59 G.3 Door close - Characteristics 60 Annex H (normative) EC verification . 61 H.1 Interoperability constituents 61 H.1.1 Conformity assessment 6
21、1 H.1.2 Application of modules 61 H.2 Subsystems . 62 H.2.1 EC verification (general) 62 H.2.2 Procedures for EC verification of a subsystem (modules) 62 Annex I (normative) Summary of testing requirements . 64 Annex J (informative) Other specific braille requirements . 66 J.1 General requirements f
22、or braille . 66 J.2 Checking readability of braille 66 J.3 Recommendations for braille carrier material . 67 J.4 The braille cell . 67 J.5 Marburg medium spacing convention for braille . 68 J.6 Braille character sets 68 Annex K (informative) Pictograms examples and Good practice 70 Annex L (informat
23、ive) Examples of toilet control device good practice . 75 L.1 Orientation of equipment and associated labels 75 L.2 Function identification . 75 L.2.1 General . 75 L.2.2 Visual identification of the function should be pictograms or simple words 75 L.2.3 Tactile identification of the function . 75 L.
24、3 “Vacant / occupied / out of service” indicator . 78 L.3.1 General . 78 BS EN 16584-2:2017EN 16584-2:2017 (E) 4 L.3.2 Visual recognition: . 78 L.3.3 Acoustic recognition . 79 Annex M (informative) Electronic display assessment guidance 80 M.1 General . 80 M.2 Worked through assessment example . 81
25、Annex N (informative) Examples of sans serif fonts . 82 Annex O (informative) Examples of tactile toilet door locking devices 84 Annex P (informative) Door buttons 87 P.1 Examples of door buttons . 87 P.2 Visual and tactile symbols on or near door buttons 87 Annex ZA (informative) Relationship betwe
26、en this European Standard and the Essential Requirements of EU Directive 2008/57/EC aimed to be covered . 89 Bibliography . 91 BS EN 16584-2:2017EN 16584-2:2017 (E) 5 European foreword This document (EN 16584-2:2017) has been prepared by Technical Committee CEN/TC 256 “Railway Applications”, the sec
27、retariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is drawn to
28、 the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Fr
29、ee Trade Association, and supports essential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fo
30、llowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands
31、, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16584-2:2017EN 16584-2:2017 (E) 6 Introduction This document is part of a suite of four Design for PRM use standards that have in total nine parts: EN 16584 is a standard
32、 that covers both infrastructure and rolling stock Railway applications Design for PRM use General requirements: Part 1: Contrast (EN 16584-1) Part 2: Information (EN 16584-2) Part 3: Optical and friction characteristics (EN 16584-3) EN 16585 is a standard that covers rolling stock Railway applicati
33、ons Design for PRM use Equipment and components on board rolling stock: Part 1: Toilets (EN 16585-1) Part 2: Elements for sitting, standing and moving (EN 16585-2) Part 3: Clearways and internal doors (EN 16585-3) EN 16586 is a standard that covers rolling stock Railway applications Design for PRM u
34、se Accessibility of persons with reduced mobility to rolling stock: Part 1: Steps for access and egress (EN 16586-1) Part 2: Boarding aids (EN 16586-2) EN 16587 is a standard that covers infrastructure Railway applications Design for PRM use Requirements for obstacle free routes for infrastructure.
35、These standards aim to clarify the requirements (with clear and consistent terms and definitions) and to define the associated criteria and, where appropriate, methodologies to allow a clear pass/fail assessment. BS EN 16584-2:2017EN 16584-2:2017 (E) 7 1 Scope This European Standard describes the sp
36、ecific Design for PRM use requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this standard: The definitions and requirements describe specific aspects of Design for PRM use required by persons with disabilities and person
37、s with reduced mobility as defined in the PRM TSI. This standard defines elements which are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this standard cover the infr
38、astructure and the rolling stock applications. This standard only refers to aspects of accessibility for PRM passengers it does not define non PRM related requirements and definitions. This standard assumes that the infrastructure or rolling stock is in its defined operating condition. Where minimum
39、 or maximum dimensions are quoted these are absolute NOT nominal requirements. The General requirements standard is written in three parts: Part 1 contains contrast; This document is Part 2 and contains spoken information; written information; tactile information; pictograms; Part 3 contains lightin
40、g; low reflective properties; transparent obstacles; slip resistance. BS EN 16584-2:2017EN 16584-2:2017 (E) 8 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edi
41、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 81-70:2003, Safety rules for the construction and installations of lifts Particular applications for passenger and good passengers lifts Part 70: Accessibility to lifts fo
42、r persons including persons with disability EN 16584-1:2017, Railway applications Design for PRM use General requirements Part 1: Contrast EN 16584-3, Railway applications Design for PRM use General requirements Part 3: Optical and friction characteristics EN 16585-1, Railway applications Design for
43、 PRM use Equipment and components on board rolling stock Part 1: toilets EN 16585-2:2017, Railway applications Design for PRM use Equipment and components on board rolling stock Part 2: Elements for sitting, standing and moving prEN 16587:2013, Railway applications Design for PRM use Requirements fo
44、r obstacle free routes for infrastructure EN 60268-16, Sound system equipment Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60286-16) ISO 3864-1, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings I
45、SO 7000, Graphical symbols for use on equipment Registered symbols ISO 7001, Graphical symbols Public information symbols ISO 21542, Building construction Accessibility and usability of the built environment ETSI EN 301 462 (2000-03), Human Factors (HF); Symbols to identify telecommunications facili
46、ties for deaf and hard of hearing people 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 ascender part of any of the characters b, d, f, h, i, j, k, l or t which protrudes above the x-height of the character Note 1 to entry: For examples see
47、Annex F 3.2 bezel raised area that surrounds a pressel as part of a pushbutton BS EN 16584-2:2017EN 16584-2:2017 (E) 9 3.3 character height vertical size of uppercase letters or numbers Note 1 to entry: For examples see Annex F. 3.4 compressed ascender ascender that has been compressed or squashed o
48、r misaligned and does not use a consistent x-height and/or ascender height Note 1 to entry: For examples see Annex F. 3.5 compressed descender descender that has been compressed or squashed or misaligned and does not use a consistent x-height and/or descender height Note 1 to entry: For examples see
49、 Annex F. 3.6 contrast perception of a difference visually between one surface or element of a building/rail vehicle and another by reference to their light reflectance values (LRV) or luminance values Note 1 to entry: See BS 8300:2009+A1 2010 for further information. 3.7 customer information all visual and spoken information other than information intended only for staff 3.8 descender part of any of the characters g, j, p, q o
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1