EN 16727-3-2017 en Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3 General safety and env.pdf

1、BS EN 16727-3:2017Railway applications Track Noise barriers and related devices acting on airborne sound propagation Non-acoustic performancePart 3: General safety and environmental r e q u i r e m e n t sBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 16727-3:

2、2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16727-3:2017. The UK participation in its preparation was entrusted to TechnicalCommittee RAE/2, Railway Applications - Track.A list of organizations represented on this committee can be obtained on request to

3、 its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 87468 0 ICS 93.100 Compliance with a British Standar

4、d cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16727-3:2017EUROPEAN STANDARD NORME EUROPENNE EURO

5、PISCHE NORM EN 16727-3 January 2017 ICS 93.100 English Version Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3: General safety and environmental requirements Applications ferroviaires - Voie - crans antibruit

6、et dispositifs connexes influant sur la propagation arienne du son - Performances non acoustiques - Partie 3 : Exigences gnrales pour la scurit et lenvironnement Bahnanwendungen - Oberbau - Lrmschutzwnde und verwandte Vorrichtungen zur Beeinflussung der Luftschallausbreitung - Nicht akustische Eigen

7、schaften - Teil 3: Allgemeine sicherheits- und umweltbezogene Anforderungen This European Standard was approved by CEN on 19 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio

8、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A vers

9、ion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, C

10、zech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

11、Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 167

12、27-3:2017 EBS EN 16727-3:2017EN 16727-3:2017 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Symbols and abbreviations . 7 5 Requirements . 7 5.1 Reaction to brush fire 7 5.2 Secondary safety (shatter properties) 7 5.3 Environ

13、mental protection . 7 5.4 Means of access or escape in emergency 7 5.5 Reflection of light 7 5.6 Electric ground connection of noise barriers on electrified lines . 8 5.7 Electrolytic corrosion 8 6 Test report . 8 6.1 Information to be reported . 8 6.2 Summary report 8 Annex A (normative) Reaction t

14、o brush fire 9 A.1 General 9 A.2 Requirements . 9 A.3 Fire test . 9 A.4 Test report 10 Annex B (normative) Secondary safety: shatter properties 11 B.1 General . 11 B.2 Requirements 11 B.2.1 Behaviour under impact 11 B.2.2 Fastening of structural and acoustical elements 11 B.3 Test method . 12 B.3.1

15、Scope . 12 B.3.2 Principle 12 B.3.3 Test equipment . 12 B.3.4 Impactor 12 B.3.5 Test specimen 12 B.3.6 Structure holding the test specimen . 12 B.3.7 Structure used to produce the impact 13 B.3.8 Evaluation . 13 B.3.9 Test report 13 BS EN 16727-3:2017EN 16727-3:2017 (E) 3 Annex C (normative) Environ

16、mental protection . 16 C.1 General . 16 C.2 Requirements . 16 Annex D (normative) Means of access or escape in emergency . 17 D.1 General . 17 D.2 Requirements . 17 Annex E (normative) Light reflection . 19 E.1 General . 19 E.2 Requirements . 19 E.2.1 General . 19 E.2.2 Classification 19 E.2.3 Test

17、method 19 E.3 Test report 20 Annex F (normative) Electrical ground connection of noise barriers and related devices acting on airborne sound propagation on electrified lines . 21 Annex G (normative) Electrolytic corrosion of noise barriers and related devices acting on airborne sound propagation 22

18、Bibliography . 23 BS EN 16727-3:2017EN 16727-3:2017 (E) 4 European foreword This document (EN 16727-3:2017) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, ei

19、ther by publication of an identical text or by endorsement, at the latest by July 2017 and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CE

20、NELEC shall not be held responsible for identifying any or all such patent rights. This European Standard is one of the series EN 16727 “Railway applications Track Noise barriers and related devices acting on airborne sound propagation Non-acoustic performance” as listed below: Part 1: Mechanical pe

21、rformance under static loadings Calculation and test methods Part 2-1: Mechanical performance under dynamic loadings due to passing trains Resistance to fatigue Part 2-2: Mechanical performance under dynamic loadings caused by passing trains Calculation method Part 3: General safety and environmenta

22、l requirements It should be read in conjunction with: prEN 16727-1, Railway applications Track Noise barriers and related devices acting on airborne sound propagation Non-acoustic performance Part 1: Mechanical performance under static loadings Calculation and test methods prEN 16727-2-1, Railway ap

23、plications Track Noise barriers and related devices acting on airborne sound propagation Non-acoustic performance Part 2-1: Mechanical performance under dynamic loadings due to passing trains Resistance to fatigue EN 16727-2-2, Railway applications Track Noise barriers and related devices acting on

24、airborne sound propagation Non-acoustic performance Part 2-2: Mechanical performance under dynamic loadings caused by passing trains Calculation method According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

25、ean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovak

26、ia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16727-3:2017EN 16727-3:2017 (E) 5 Introduction While performing their primary function, noise barriers and related devices acting on airborne sound propagation installed along railways should not pose hazards to rail user

27、s or other people in the vicinity or to the environment at large. Noise barriers and related devices should not assist the spread of fire from adjacent verges or nearby land. Fire resistance in accordance with particular standards can in addition be required to minimize risk to adjacent premises, or

28、 to rail users in confined corridors. Noise barriers and related devices should not reflect light towards train drivers in such a way as to compromise rail safety. They should be made from materials which do not emit noxious fumes or leachates as the result of natural or industrial processes, or as

29、the result of fire. Noise barriers should allow a means of escape by rail users and access by operatives in the event of an emergency. Noise barriers and related devices acting on airborne sound propagation are not, in general, expected to resist the impact of vehicles, but designers can utilize inf

30、ormation about the consequences of such impact load to establish the requirements for protection of rail users and passers-by. BS EN 16727-3:2017EN 16727-3:2017 (E) 6 1 Scope This European Standard specifies minimum requirements and other criteria for assessing the general safety and environmental p

31、erformance of noise barriers and related devices acting on airborne sound propagation under typical rail-side conditions. Requirements for more onerous conditions are a matter for consideration by the designer. Appropriate test methods are provided where these are necessary, but for some aspects a d

32、eclaration of material characteristics may be required for the information of designers. The treatment of each topic is covered separately in Annexes A to G. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its

33、 application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. prEN 16727-1:2015, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - No

34、n-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test methods EN 50122-1, Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock EN ISO 2813, Paints and varn

35、ishes - Determination of gloss value at 20, 60 and 85 (ISO 2813) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 noise barrier noise reducing device, which obstructs the direct transmission of airborne sound emanating from railways and which

36、will typically span between posts and also may overhang the railway Note 1 to entry: Noise barriers are generally made of acoustic and structural elements (see 3.3 and 3.4). 3.2 cladding noise reducing device, which is attached to a wall or other structure and reduces the amount of sound reflected N

37、ote 1 to entry: Claddings are generally made of acoustic and structural elements (see 3.3 and 3.4). 3.3 acoustic element element whose primary function is to provide the acoustic performance of the device 3.4 structural element element whose primary function is to support or hold in place acoustic e

38、lements Note 1 to entry: In some noise barriers, the acoustic function and the structural function cannot be clearly separated and attributed to different components. BS EN 16727-3:2017EN 16727-3:2017 (E) 7 3.5 added device added component that influences the acoustic performance of the original noi

39、se-reducing device (acting primarily on the diffracted energy) 3.6 rail side exposure use of the product as a noise barrier installed alongside railways 4 Symbols and abbreviations For the purposes of this document, the following symbols and abbreviations apply. Table 1 Symbols and abbreviations Sym

40、bol or abbreviation Designation Unit r Radius of curvature in a vertical section of the impact surface of the impactor described in Annex B mm Aperture angle in a vertical section of the impactor described in Annex B degrees 5 Requirements 5.1 Reaction to brush fire The noise reducing device shall b

41、e classified in accordance with Annex A. This European Standard permits specifying authorities to indicate that there is no requirement for resistance to brush fire. 5.2 Secondary safety (shatter properties) When secondary safety has to be assessed, this shall be done in accordance with Annex B. Thi

42、s European Standard permits specifying authorities to indicate that there is no requirement for secondary safety. 5.3 Environmental protection The constituent materials and their breakdown products shall be identified in accordance with Annex C. This European Standard permits specifying authorities

43、to indicate that there is no requirement for environmental protection. 5.4 Means of access or escape in emergency The acoustic and mechanical performances of doors or other means of access or escape shall be assessed in accordance with Annex D. This European Standard permits specifying authorities t

44、o indicate that there is no requirement for means of access or escape in emergency. 5.5 Reflection of light The results of a standard test of reflectivity shall be quoted in accordance with Annex E. BS EN 16727-3:2017EN 16727-3:2017 (E) 8 This European Standard permits specifying authorities to indi

45、cate that there is no requirement for light reflection to be mitigated. 5.6 Electric ground connection of noise barriers on electrified lines The provisions in Annex F shall be applied. This European Standard permits specifying authorities to indicate that there is no requirement for electric ground

46、 connection. 5.7 Electrolytic corrosion The provisions in Annex G shall be applied. This European Standard permits specifying authorities to indicate that there is no requirement for electrolytic corrosion to be mitigated. 6 Test report 6.1 Information to be reported Every test report on aspects of

47、performance shall include the following information: a) number and year of this European Standard; b) full description of the element or system tested, including manufacturer(s), part numbers, place and date of origin; c) description of the method of sampling, if parts of manufactured elements are e

48、valuated by testing; d) place and date of assessment, and the name of the assessor; e) sufficient description of any tests carried out, any results measured and the conclusions drawn about the product together with any illustrations or photographs, all as specified in the appropriate annex. 6.2 Summ

49、ary report A summary report shall be produced, identifying the aspects of performance for which detailed reports are available and the level of performance assessed, where appropriate. BS EN 16727-3:2017EN 16727-3:2017 (E) 9 Annex A (normative) Reaction to brush fire A.1 General Noise barriers and related devices acting on airborne sound propagation can be exposed to fire arising from dry vegetation or other material in close proximity. Where a noise reducing device is in close proximity to property it can also