EN 16810-2017 en Resilient textile and laminate floor coverings - Environmental product declarations - Product category rules.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rulesBS EN 16810:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16810 May 2017 ICS 13.020.50; 97.150 Engl

2、ish Version Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules Revtements de sol rsilients, textiles et stratifis - Dclarations environnementales des produits - Rgles rgissant les catgories de produits Elastische, textile und Laminat-Bodenbe

3、lge - Umwelt-Produktdeklarationen - Produktkategorieregeln This European Standard was approved by CEN on 13 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard with

4、out any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other

5、language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De

6、nmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN

7、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16810:2017 ENational

8、 forewordThis British Standard is the UK implementation of EN 16810:2017.The UK participation in its preparation was entrusted to Technical Committee PRI/3, Textile floor coverings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does

9、 not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88023 0ICS 97.150; 13.020.50Compliance with a British Standard cannot confer immunity fr

10、om legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 16810:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16810 May

11、2017 ICS 13.020.50; 97.150 English Version Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules Revtements de sol rsilients, textiles et stratifis - Dclarations environnementales des produits - Rgles rgissant les catgories de produits Elastisc

12、he, textile und Laminat-Bodenbelge - Umwelt-Produktdeklarationen - Produktkategorieregeln This European Standard was approved by CEN on 13 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta

13、tus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, G

14、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croa

15、tia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turk

16、ey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. R

17、ef. No. EN 16810:2017 EBS EN 16810:2017EN 16810:2017 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 6 4 Abbreviations 10 5 General aspects . 11 5.1 Objectives of product categorization rules . 11 5.2 EPD with respect to life cycl

18、e stages covered 11 5.3 Comparability of EPD for floor coverings 14 5.4 Ownership, responsibility and liability for the EPD 15 5.5 Communication formats 15 6 Product Category Rules for LCA 15 6.1 Product category 15 6.2 Life cycle stages and their information modules to be included 15 6.3 Calculatio

19、n rules for the LCA 16 6.4 Inventory analysis . 22 6.5 Accounting for biogenic carbon during the life cycle 24 6.6 Impact assessment . 25 7 Content of the EPD . 26 7.1 Declaration of general information . 26 7.2 Declaration of environmental parameters derived from LCA . 29 7.3 Scenarios and addition

20、al technical information. 32 7.4 Aggregation of information modules 35 8 Project report 35 8.1 General . 35 8.2 Background report 35 8.3 LCA-related elements of the project report 35 8.4 Documentation on additional information . 37 8.5 Data availability for verification . 37 9 Verification and valid

21、ity of an EPD 38 Annex A (normative) Requirements and guidance on the reference service life 39 Annex B (Informative) Reference Service Life (RSL) for floor covering 43 Annex C (Informative) Waste 44 Bibliography . 45 BS EN 16810:2017EN 16810:2017 (E) 3 European foreword This document (EN 16810:2017

22、) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by No

23、vember 2017, and conflicting national standards shall be withdrawn at the latest by November 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. Ac

24、cording to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

25、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16810:2017EN 16810:2017 (E) 4 Introduction This European standard provides

26、core product category rules for resilient, textile and laminate floor coverings. It is based on the principles laid down in EN 15804 and in EN ISO 14025 and modified to suit the specific needs of the product families addressed in the scope of this standard. It provides a structure to ensure that all

27、 Environmental Product Declarations (EPD) for resilient, textile and laminate floor coverings processes are derived, verified and presented in a harmonized way. An EPD communicates verifiable, accurate, non-misleading environmental information for products and their applications, thereby supporting

28、scientifically based, fair choices and stimulating the potential for market driven continuous environmental improvement. EPD information is expressed in information modules, which allow easy organization and expression of data packages throughout the life cycle of the product. The approach requires

29、that the underlying data should be consistent, reproducible and comparable. The EPD is expressed in a form that allows aggregation (addition) to provide complete information for buildings. This standard does not deal with aggregation at the building level nor does this standard describe the rules fo

30、r applying EPD in a building assessment. The standard deals with a limited number of quantifiable predetermined parameters. Future revisions may incorporate additional parameters. This European Standard provides the means for developing a Type III environmental declaration of resilient, textile and

31、laminate floor coverings BS EN 16810:2017EN 16810:2017 (E) 5 1 Scope This European standard provides product category rules (PCR) for Type III environmental product declarations (EPD) for resilient, textile and laminate floor coverings. This standard applies to the following types of floor coverings

32、: resilient floor coverings manufactured from plastics, linoleum, cork or rubber, including loose-laid mats; textile floor coverings, including loose-laid mats, rugs and runners; laminate floor coverings; modular floating floor coverings panels; An EPD may be developed for single or individual produ

33、cts, product groups and average products. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of th

34、e referenced document (including any amendments) applies. CEN/TS 15398, Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element EN 15804:2012+A1:2013, Sustainability of construction works - Environmental product declarations - Core rules for the prod

35、uct category of construction products CEN/TR 15941, Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data EN 15942, Sustainability of construction works - Environmental product declarations - Communication format business-to-bus

36、iness EN 16485, Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction EN ISO 10874, Resilient, textile and laminate floor coverings - Classification (ISO 10874) EN ISO 14025, Environmental labels and declarations

37、- Type III environmental declarations - Principles and procedures (ISO 14025) EN ISO 14044:2006, Environmental management - Life cycle assessment - Requirements and guidelines (ISO 14044:2006) ISO 15686-1, Buildings and constructed assets Service life planning Part 1: General principles and framewor

38、k ISO 15686-2, Buildings and constructed assets Service life planning Part 2: Service life prediction procedures ISO 15686-7, Buildings and constructed assets Service life planning Part 7: Performance evaluation for feedback of service life data from practice BS EN 16810:2017EN 16810:2017 (E) 6 ISO

39、15686-8, Buildings and constructed assets Service-life planning Part 8: Reference service life and service-life estimation ISO 21930, Sustainability in building construction Environmental declaration of building products 3 Terms and definitions For the purposes of this document, the following terms

40、and definitions apply. 3.1 ancillary material input material or product that is used by the unit process producing the product, but which does not constitute part of the product SOURCE: EN ISO 14040 3.2 average data data representative of a product, product group or construction service, provided by

41、 more than one supplier Note 1 to entry: The product group or construction service can contain similar products or construction services. 3.3 comparative assertion environmental claim regarding the superiority or equivalence of one product versus a competing product that performs the same function S

42、OURCE: EN ISO 14040 3.4 co-product any of two or more marketable materials, products or fuels from the same unit process, but which is not the object of the assessment Note 1 to entry: Co-product, by-product and product have the same status and are used for identification of several distinguished fl

43、ows of products from the same unit process. From co-product, by-product and product, waste is the only output to be distinguished as a non-product. 3.5 declared unit quantity of a floor covering for use as a reference unit in an EPD for an environmental declaration based on one or more information m

44、odules Note 1 to entry: For floor coverings the declared unit is 1 m2of installed floor covering. 3.6 environmental performance performance related to environmental impacts and environmental aspects SOURCE: ISO 15392 and ISO 21931-1 BS EN 16810:2017EN 16810:2017 (E) 7 3.7 functional unit quantified

45、performance of a product system for use as a reference unit SOURCE: EN ISO 14040 3.8 information module compilation of data to be used as a basis for a Type III environmental declaration covering a unit process or a combination of unit processes that are part of the life cycle of a product SOURCE: E

46、N ISO 14025 3.9 life cycle assessment LCA compilation and evaluation of the inputs, outputs and the potential environmental impacts of a product system throughout its life cycle SOURCE: EN ISO 14040 3.10 life cycle inventory analysis LCI phase of life cycle assessment involving the compilation and q

47、uantification of inputs and outputs for a product throughout its life cycle SOURCE: EN ISO 14040 3.11 manufacturers declaration environmental product declaration (EPD) by a manufacturer: for a specific product from one plant or as an average from several plants or for an average product from one pla

48、nt or as an average from several plants Note 1 to entry: A reference product, which describes a specific (usually typical) product, can also be declared. 3.12 manufacturers group declaration EPD for a specific or average product as an average from several manufacturers plants 3.13 non-renewable ener

49、gy energy from sources which are not defined as renewable energy sources 3.14 non-renewable resource resource that exists in a finite amount that cannot be replenished on a human time scale SOURCE: ISO 21930 BS EN 16810:2017EN 16810:2017 (E) 8 3.15 performance expression relating to the magnitude of a particular aspect of the object of consideration relative to specified requirements, objectives or targets Note 1 to entry: Adapted from the definition in ISO 6707-1 according to the draft recommendation of ISO/TC