EN 16830-2017 en Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function《燃烧气体.pdf

1、BS EN 16830:2017Safety and control devicesfor burners and appliancesburning gaseous or liquidfuels Control functionsin electronic systems Temperature Control functionBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 16830:2017 BRITISH STANDARDNational forewordThi

2、s British Standard is the UK implementation of EN 16830:2017. The UK participation in its preparation was entrusted to TechnicalCommittee GSE/22, Safety and control devices for gas and oil burners and gas burning appliances.A list of organizations represented on this committee can be obtained on req

3、uest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 88021 6 ICS 91.140.40; 97.100.20 Compliance w

4、ith a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16830:2017EUROPEAN STANDARD NOR

5、ME EUROPENNE EUROPISCHE NORM EN 16830 March 2017 ICS 91.140.40; 97.100.20 English Version Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function quipements auxiliaires pour brleurs et appareils ut

6、ilisant des combustibles gazeux ou liquides - Dispositifs de contrle des systmes lectroniques - Dispositifs de rgulation de la temprature Sicherheits- und Regeleinrichtungen fr Brenner und Brennstoffgerte fr gasfrmige oder flssige Brennstoffe - Regelfunktionen in elektronischen Systemen - Temperatur

7、berwachungsfunktion This European Standard was approved by CEN on 23 October 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and

8、 bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r

9、esponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

10、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUR

11、OPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16830:2017 EBS EN 16830:2017EN 16830:2017 (E) 2 Contents Pag

12、e European foreword . 4 Introduction 5 Figure 1 Standards house 5 1 Scope 7 2 Normative references 7 3 Terms and definitions . 7 4 Classification . 8 4.1 Classes of control . 8 4.2 Groups of control . 8 4.3 Classes of control functions . 8 4.4 Types of DC supplied controls 8 5 Test conditions and me

13、asurement tolerances . 8 6 Construction requirements . 8 6.1 General 8 6.2 Mechanical parts of the control . 8 6.3 Materials . 9 6.4 Gas Connections . 9 6.5 Electrical parts of the control . 9 6.5.1 General 9 6.5.2 Switching elements . 9 6.5.3 Electrical components . 9 6.6 Protection against interna

14、l faults for the purpose of functional safety . 10 6.6.1 Design and construction requirements . 10 6.6.2 Class A . 10 6.6.3 Class B . 10 6.6.4 Class C . 11 6.6.5 Circuit and construction evaluation 11 6.7 TTB 11 6.7.1 General . 11 6.7.2 Threshold value 11 6.8 TCF . 12 7 Performance 12 7.1 General .

15、12 7.2 Leak-tightness . 12 7.3 Test for leak-tightness 12 7.4 Torsion and bending . 12 7.5 Torsion and bending tests 12 7.6 Rated flow rate 12 7.7 Test for rated flow rate 13 7.8 Durability 13 7.8.1 Elastomers in contact with gas 13 7.8.2 Marking 13 7.8.3 Resistance to scratching 13 BS EN 16830:2017

16、EN 16830:2017 (E) 3 7.8.4 Resistance to humidity . 13 7.9 Performance tests for electronic controls . 13 7.9.1 At ambient temperature 13 7.9.2 At minimum temperature 13 7.9.3 At maximum temperature . 13 7.10 Long-term performance for electronic controls . 13 7.10.1 General . 13 7.10.2 Stress test 13

17、 7.10.3 Long term performance test . 14 7.10.101 TCF Sensing element(s) assembly 14 7.10.102 TTB Sensing element(s) assembly . 14 7.11 Data exchange 14 8 Electrical requirements 14 9 Electromagnetic compatibility (EMC) . 15 10 Marking, installation and operating instructions . 15 10.1 Marking 15 10.

18、2 Installation and operating instructions . 15 10.3 Warning Notice 15 Annex A (informative) Abbreviations and Symbols 16 Annex B (informative) Leak-tightness test for gas controls volumetric method 17 Annex C (informative) Leak-tightness test for gas controls pressure loss method 18 Annex D (normati

19、ve) Conversion of pressure loss into leakage rate . 19 Annex E (normative) Electrical/electronic component fault modes 20 Annex F (normative) Additional requirements for safety accessories and pressure accessories as defined in EU Directive 97/23/EC . 21 Annex G (normative) Materials for pressurized

20、 parts . 22 Annex H (normative) Additional materials for pressurized parts 23 Annex I (normative) Requirements for controls used in DC supplied burners and appliances burning gaseous or liquid fuels. 24 Annex J (normative) Method for the determination of a Safety Integrity Level (SIL) . 25 Annex K (

21、normative) Method for the determination of a Performance Level (PL) . 26 Annex L (informative) Relationship between Safety Integrity Level (SIL) and Performance Level (PL) . 27 Annex M (normative) Reset functions 28 Annex N (informative) Guidance document on Environnemental Aspects 29 Annex O (norma

22、tive) Seals of elastomer, cork and synthetic fibre mixtures 30 Bibliography . 31 BS EN 16830:2017EN 16830:2017 (E) 4 European foreword This document (EN 16830:2017) has been prepared by Technical Committee CEN/TC 58 “Safety and control devices for burners and appliances burning gaseous or liquid fue

23、ls”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017.

24、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the follo

25、wing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N

26、orway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16830:2017EN 16830:2017 (E) 5 Introduction The generic requirements for controls are given in EN 13611 and methods for classification and assessment for new controls and con

27、trol functions are given in EN 14459 (see Figure 1). The requirements for controls are given in the specific control standard (see Figure 1). Multifunctional Controls (MFC) according to EN 126:2012 and EN 126:2012/prA1:2014 with two or more controls and Application Control Functions, e .g. the Gas S

28、hut-off Control Function, being inherently multifunctional controls. Each control integrated in the MFC should meet the applicable requirements of the relevant control standard(s). In addition, EN 126:2012 and EN 126:2012/prA1:2014 cover requirements for the safety related interactions between the d

29、ifferent devices. Figure 1 Standards house This control standard refers to clauses of EN 13611:2015 or adapts it by stating “with the following modification”, “with the following addition”, “is replaced by the following” or “is not applicable” in the corresponding clause. This document adds clauses

30、or subclauses to the structure of EN 13611:2015 which are particular to this European Standard, i.e. subclauses or annexes that are additional to those in EN 13611:2015 are numbered starting from 101 or are designated as Annex AA, BB, CC etc. It should be noted that these clauses and subclauses are

31、not indicated as an addition. This control standard describes requirements for two types of temperature based Appliance Control Functions. 1) Temperature Control Function The temperature control function (in the following called TCF) is a system that consists of temperature sensing, signal processin

32、g, switching actions (on/off or protective action) and reset (see Figure 2). The purpose of a TCF is to control the temperature (temperature regulator) and to prevent the risk of excessive temperature (temperature limiter) which could lead to the hazard of overheating for gas and liquid fuel burning

33、 appliances. A TCF requires a safety class C system, based on a comparison, made between an automatic burner controller and a temperature control function, the implication on safety of either function being considered equivalent. Gas and liquid fuel appliance standards can allow a lower safety class

34、 in combination with constructional measures, as long as the overall result for TCF is a safety class C. BS EN 16830:2017EN 16830:2017 (E) 6 Traditional solutions, using a combination of mechanical thermostats as specified in the appliance standards (e.g. EN 15502-1) have been considered to fulfil t

35、he requirements. This assumption is based on specific mechanical solutions, originating from practice over many years and relying on redundancy as the principle. 2) TTB The Appliance Control Function TTB (Combustion Product Discharge Safety Device) is intended to provide protection against poisoning

36、 and suffocation in case of a (partially) blocked flue. This clause provides the requirements for electronic TTBs consisting of: a control that can take a protective action and a sensing element that monitors a significant physical value in relation to the spillage of combustion products into the en

37、vironment where the gas appliance is installed. If the spillage reaches a pre-set level, the TTB should initiate a protective action. Allowable spillage is determined by the application standard. NOTE Instead of TTB, the term “Combustion Product Discharge Safety Device” is used in EN 1550222. For bo

38、th TTB and TCF, the requirements in this European Standard are applicable to the combination of sensing element and control. Key 1 reset 5 protective action 2 sensing element(s) 6 on/off 3 switching action(s) 7 control 4 temperature regulator and protective controller 8 temperature control function

39、Figure 2 Temperature control function BS EN 16830:2017EN 16830:2017 (E) 7 1 Scope This European Standard specifies the safety, design, construction and performance requirements for Temperature Control Function (TCF) and Combustion Product Discharge Safety Device (TTB) intended for use with burners a

40、nd appliances using gaseous or liquid fuels. It also describes the test procedures for checking compliance with these requirements. This European Standard is applicable to AC and DC supplied TCF and TTB (for TCF and TTB supplied by stand-alone battery system, battery systems for mobile applications

41、or systems which are intended to be connected to DC supply networks, see Annex I). This European Standard is applicable to electronically based TTB and TCF only. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for

42、 its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13611:2015, Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General require

43、ments EN 60730-2-9:2010, Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2008, modified) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13611:2015 and the f

44、ollowing apply. 3.101 control device that provides functionality as described in the specific control standard 3.102 multifunctional control MFC combination of two or more controls and/or Application Control Function(s) whereby the functional parts cannot operate if separated 3.103 application contr

45、ol function ACF function to protect against harm(s) originating from a specific hazard by providing safe operation of gas burners and gas burning appliances Note 1 to entry: The assembly to provide this function may consist of a combination of controls and/or multifunctional control(s) (e.g. actuato

46、rs, sensors and control electronics). BS EN 16830:2017EN 16830:2017 (E) 8 3.104 combustion products discharge safety device TTB appliance control function that at least causes safety shut-down of the main burner when there is an unacceptable spillage of combustion products at the draught diverter SO

47、URCE: EN 15502-2-2:2014, 3.1.4.101 3.105 temperature control function TCF appliance control function that controls the temperature (temperature regulator) and prevents the risk of excessive temperature (temperature limiter) which could lead to the hazard of overheating in gas and liquid fuel burning

48、 appliances by initiating at least a shut-down of the main burner 4 Classification 4.1 Classes of control EN 13611:2015, 4.1 is replaced by the following: The safety class of a TTB Appliance Control Function can be class A, class B or class C, depending on the application. The safety class of the TT

49、B shall be stated in the installation and operating instructions. The TCF shall be safety class C. A lower class may be acceptable if this is proven by the analysis of the preventative measures within the appliance. The safety class of the TCF shall be stated in the installation and operating instructions. A TCF may consist of various independent hardware and software devices. These individual devices, being part of the TCF, shall be classified as class A, class B or class C. 4.2 Groups of control EN 13611:2015, 4.2 is not applicable. 4.3 Classes