1、CEN ENx29009 94 3404589 0064932 097 H BRITISH STANDARD Glass containers - Height and non-parallelism of finish with reference to container base - Test methods The European Standard EN 29009 : 1994 has the status of a British Standard Rcipients en verre - Hauteur et non-paralllisme la bague par rappo
2、rt au fond du rcipient - Mthodes dessai Behltnisse aus Glas - Hhe und Nichtparallelitt von Mndung und Behltnisboden - Prfverfahren UDC 621.798.147 : 666.171/172.531.717 BS EN 29009 : 1994 IS0 9009 : 1991 CEN EN*29009 94 3404589 0064913 T23 Amd. No. BS EN 29009 : 1994 Date lxt affected Cooperating or
3、ganizations The European Committee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the following countries: Austria Belgium Denmark Finland France Germany Greece Iceland Ireland Italy Luxembourg Netherlands Nor
4、way Portugal Spain Sweden Switzerland United Kingdom Oesterreichisches Normungsinstitut Institut belge de normalisation Dansk Standardiseringsraad Suomen Standardisoimisliito, r. y. Association franaise de normalisation Deutsches Institut fr Normung e.V. Hellenic Organization for Standardization Tec
5、hnological Institute of Iceland National Standards Authority of Ireland Ente Nazionale Italiano di Unificazione Inspection du Travail et des Mines Nederlands Normalisatie-instituut Norges Standardiseringsforbund Instituto Portugus da Qualidade Asociacin Espaola de Normalizacin y Certificacin Standar
6、diseringskommissionen i Sverige Association suisse de normalisation British Standards Institution This British Standard, having been prepared under the direction of the Packaging and Freight Containers Standards Policy Committee, was published under the authority of the Standards Board and comes int
7、o effect on 15 July 1994 O BSI 1994 The following ES1 references relate to the work on this standard: Committee reference PKM/6 Draft for comment 8845701 DC ISBN O 680 22989 O CEN EN*27007 74 m 3404589 0064734 9bT m BS EN 29009 : 1994 Contents page Cooperating organizations Inside front cover Nation
8、al foreword i Foreword 2 Methods 1 Scope 3 2 Normative reference 3 Definitions 4 Principle 5 Apparatus 6 Sampling 7 Procedure 8 Expression of results 9 Test report Figures 1 Non-parallelism 4 2 Example of a height gauge 4 National annex NA (informative) Committees responsible Inside back cover Nat i
9、onal foreword This British Standard has been prepared under the direction of the Packaging and Freight Containers Standards Policy Committee and is the English language version of EN 29009 : 1993 Glass containers - Height and non-parallelism of finish with refwence to container base - lbst methods,
10、published by the European Committee for Standardization (CEN). It is identical with IS0 9009 : 1991 Glass containers - Height and non-parallelism of finish with refwme to container base - 7kst methods, published by the International Organization for Standardization (ISO) . Compliance with a British
11、Standard does not of itself confer immunity from legal obligations. i CEN EN*:29009 94 EUROPEAN STANDARD NORMEEUROPENNE EUROPISCHE NORM 3404589 0064935 8Tb EN 29009 April 1994 UDC 621.798.147 : 666.17U172.531.717 Descriptors: Containers, glass packaging, tests, determination, height, parallelism, di
12、mensional measurements English version Glass containers - Height and non-parallelism of finish with reference to container base - Test methods (IS0 9009 : 1991) Rcipients en verre - Hauteur et non-paralllisme la bague par rapport au fond du rcipient - Mthodes dessai Behltnisse aus Glas - Hhe und Nic
13、htparallelitt von Mndung und Behltnisboden - Prfverfahren (IS0 9009 : 1991) (IS0 9009 : 1991) This European Standard was approved by CEN on 1994-04-01. CEN members are bound to comply with the CENXENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status
14、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A ver
15、sion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Gr
16、eece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Centrai Secretariat: rue de Stassart 36, B-1050 Brussels O 1994 Copyright
17、reserved to CEN members Ref. No. EN 29009 : 1994 E CEN ENd29009 94 m 3404589 O064936 732 = Page 2 EN29009: 1994 Foreword On the proposal of the CEN Central Secretariat, the Technical Board decided to submit the International Standard: IS0 9009 : 1991 Glass containers - Height and non-parallelism of
18、finish with refrme to container base - mt methods to the formal vote. The result of the formal vote was positive. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 1994, and conflicting nati
19、onal standards shall be withdrawn at the latest by October 1994. In accordance with the CENKENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherland
20、s, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN EN*29009 94 3404589 0064737 679 Page 3 EN 2909 : 1994 Glass containers - Height and non-parallelism of finish with reference to container base - Test methods I Scope This International Standard specifies test methods for determi
21、ning the height and the non-parallelism of finish with reference to the container base of glass containers. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the
22、edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encour- aged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and IS0 maintain registers of cur- re
23、ntly valid International Standards. IS0 7348:1991, Glass containers - Manufacture - Vocabulary. 3 Definitions For the purposes of this International Standard, the definitions given in IS0 7348 and the following defi- nitions apply. 3.1 (maximum) height of a container: The distance between the highes
24、t point on the plane of the top surface of the finish and the standing surface, (See figure 1.) 3.2 minimum height of a container: The distance between the lowest point on the plane of the top surface of the finish and the standing surface. (See figure 1.) 3.3 non-parallelism: The difference between
25、 the maximum and minimum heights of a container. (See figure 1 .) 4 Principle 4.1 Checking of the height of a container using maximum and minimum GO/NO GO gauges or by using an appropriate measuring instrument. Deter- mination of the (maximum) height. 4.2 Determination of the non-parallelism of fini
26、sh. 5 Apparatus 5.1 For checking the height Various types of gauge exist. Examples are given in 5.1.1 and 5.1.2 , 5.1.1 Helght gauge, consisting for example of a baseplate with one or two vertical pillars and a) a fixed horizontal cross-piece, in which case the distance between the baseplate and the
27、 cross- piece is equivalent to the dimension to be gauged, or b) a fixed horizontal cross-piece with a step, in which case the distances between the baseplate and the two portions of the cross-piece are equivalent to the maximum and minimum heights . to be gauged (see, for example, figure2), or c) a
28、n adjustable horizontal cross-piece, which may be fixed at a distance from the baseplate equiv- aient to the distance to be gauged. 5.1.2 Window gauge, which combines minimum body diameter and maximum height. CEN EN+29009 94 3404589 0064718 505 W Page 4 EN 29009 1994 Non-parallellrm I E I A Figure 1
29、 - Non-parailelism 1 bl FI- 2 - Example of a helght gauge CEN ENx29009 94 m 3404589 0064939 LI43 m 5.2 For determination of height Various types of apparatus exist, such as an engin- eering height vernier and a micrometer height gauge. Such apparatus shall have an accuracy of measurement of at least
30、 0.1 mm. 5.3 For determination of non-parallelism The apparatus may be a) that described in 5.1.1 c) together with feeler gauges in 0,l mm steps, or b) the apparatus described in 5.2 For quick qualitative determinations, a spirit level may be used. 6 Sampling Sampling shall form the subject of agree
31、ment be- tween the parties concerned. 7 Procedure 7.1 Height of container 7.1.1 Quick check Place the container on a metal baseplate. Set up a height gauge (5.1.1) (see, for example, figure2) so that the minimum and maximum heights correspond to the height tolerance requirements to an accuracy of 0,
32、1 mm. Determine those containers which slide under the highest portion of the gauge and which do not slide under the lowest portion of the gauge. 7.1.2 Determination of (maximum) height Using an engineering height vernier or other suit- able apparatus (5.2), measure the (maximum) height of the conta
33、iner to an accuracy of 0,1 mm. 7.2 conta i ne r base Non-parallellsm of finish with reference to Page 5 EN 29009 : 1994 8 Expression of results 8.1 Height of container 8.1.1 Quick check (see 7.1.1) If results by attributes are required, take as the re- sult lhe number of containers which meet the he
34、ight tolerance requirements. 8.1.2 (Maximum) height (see 7.1.2) Take as the result the height, in millimetres, deter- mined in 7.1.2. 8.2 container base Non-parallelism of finish with reference to Take as the result the difference between the maxi- mum and minimum heights, in millimetres, deter- min
35、ed in 7.2. 9 Test report The test report shall specify the following infor- mation: a) reference to this international Standard: b) reference to the test method(s) used (.e. 7.1 and/or 7.2); c) the size of the sample and the type of container tested; d) manufacturing details; e) the type of apparatu
36、s used; f) the results obtained; g) the testers name and signa.Jre. and date of test. Place the container on a metal baseplate. Using an engineering height vernier or other suitable appar- atus (5.2) measure, io an accuracy of 0,l mm, the lowest point of the finish (.e. the minimum height) and, if n
37、ot already determined in 7.1.2, the highest point of the finish (.e. the maximum height) (see figure 1). CEN EN*29009 94 3404589 O064920 163 W BS EN 29009 : 1994 National annex NA (informative) Committees responsible The United Kingdom participation in the preparation of this European Standard was e
38、ntrusted by the Packaging and Freight Containers Standards Policy Committee (PKM/-) to Technical Committee PKM/6, upon which the following bodies were represented: Association of the British Pharmaceutical Industry Brewers Society British Glass Manufacturers Confederation British Pharmacopoeia Commi
39、ssion British Plastics Federation British Retail Consortium British Soft Drinks Association Ltd. Campden Food and Drink Research Association Child Accident Prevention Trust Consumer Policy Committee of BSI Dairy Trade Federation Department of Trade and Industry (Consumer Safety Unit, CA Division) Fo
40、od and Drink Federation Institute of Trading Standards Administration Metal Packaging Manufacturers Association National Association of Cider Makers Royal Society for the Prevention of Accidents Scotch Whisky Association Scottish Association of Soft Drinks Manufacturers Welsh Beekeepers Association
41、Wine and Spirit Association of Great Britain CEN EN*27007 74 3404587 0064921 OTT W BS EN 29009 : 1994 IS0 9009 : 1991 BSI 2 Park Street London W 1A 2BS BSI Linford Wood Milton Keynes MK14 6LE 9407 - 5 - 0.4k - FP BSI - British Standards Institution BSI is the independent national body responsible fo
42、r preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Contract requirements A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsib
43、le for their correct application. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. Any person who finds an inaccuracy or ambiguity while using this British Standard should notify BSI wit
44、hout delay so that the matter may be investigated swiftly. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for ail BSI, international and foreign standards publications should
45、 be addressed to Customer Services, Publications at Milton Keynes: Tel: 0908 221166; Fax: 0908 322484. In response to orders for international and European standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.
46、 information on standards BSI provides a wide range of information on national, European and international standards through its Library, the Standardline Database, the BSI Information %chnology Service (BrrS) and its Bchnical Help to Exporters Service. Contact Customer Services, Information at Milt
47、on Keynes: %l: 0908 226888. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Head of Customer Services, Membership Group at Milton Keynes: Bl: 0908 226777.
48、Copyright Copyright subsists in all BSI publications and no part may be reproduced in any form without the prior permission in writing of BSI. This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols and size, type or grade designations inc
49、luding use by incorporation into computer programs, but where these details are reproduced including without limitation in printed form, in computer programs or in any other form whatsoever, the permission in writing of BSI must be obtained and if granted will be on terms including royalty, before the product is sold, licensed or otherwise exploited for commercial gain. Enquiries about copyright should be made to the Copyright Manager, Publications at Milton Keynes. ISBN O 080 22989 O PKM6
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1