EN 41003-2008 en Particular safety requirements for equipment to be connected to telecommunication networks and or a cable distribution system《电信网络和 或电缆配电系统连接用设备的特殊安全要求》.pdf

1、Particular safety requirementsfor equipment to be connectedto telecommunication networksand/or a cable distribution systemBS EN 41003:2009raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is th

2、e UK implementation of EN 41003:2008. It supersedes BS EN 41003:1999, which will be withdrawn on 1 July 2011.The UK participation in its preparation was entrusted to Technical CommitteeEPL/108, Safety of electronic equipment within the field of audio/video, information technology and communication t

3、echnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 61043 1ICS 33.040.01Compliance

4、with a British Standard cannot confer immunity fromlegal obligations.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 41003:2009This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on February 2009.2 8EUROPEAN STANDA

5、RD EN 41003 NORME EUROPENNE EUROPISCHE NORM November 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rig

6、hts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 41003:2008 E ICS 33.040.00 Supersedes EN 41003:1998English version Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system Rgles

7、particulires de scurit pour les matriels de scurit destins tre relis aux rseaux de tlcommunications et/ou aux systmes de distribution par cbles Besondere Sicherheitsanforderungen an Gerte zum Anschluss an Telekommunikationsnetze und/oder Kabelverteilsysteme This European Standard was approved by CEN

8、ELEC on 2008-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa

9、rds may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notif

10、ied to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania

11、, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 41003:2009EN 41003:2008 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 108X, Safety of electronic equipment with

12、in the fields of audio/video, information technology and communication technology. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 41003 on 2008-07-01. This European Standard supersedes EN 41003:1998 + corrigendum September 2000. The following

13、 dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-07-01 The first edition of th

14、is European Standard was prepared by CENELEC TC 74X, in close cooperation with a number of international organizations, e.g. IEC, ECMA, CEPT, CCITT, ETSI. In 1993 TC 74X was disbanded and responsibility for this European Standard passed to the Technical Committee CENELEC TC 74, Safety and energy eff

15、iciency of information technology equipment. CENELEC TC 74 was disbanded by D112/112 in 2002 and merged with CENELEC TC 92 into new CENELEC TC 108, which was renumbered CENELEC TC 108X by 130 BT. At that time, a standard was needed for uniform application by network operators in Europe when approvin

16、g subscribers equipment for attachment to their networks, and for purchasing purposes by network operators. In February 1986 the CENELEC Technical Board formed a working group Telecom Safety which became CENELEC TC 74X in early 1987. IEC TC 74 established WG7 to amend IEC 60950 for a similar purpose

17、. ENV 41003 was ratified by the CENELEC Technical Board in March 1988 and subsequently amended and converted into this EN 41003 which was ratified in September 1990. In June 1992 the CENELEC Technical Board approved the reprint of EN 41003, which was technically unchanged from EN 41003:1991 and refe

18、rs to EN 60950:1992 wherever possible. The edition of EN 41003:1996 was deemed necessary following the publication of EN 60950:1992/A3:1995 to reflect further convergence of the two standards. The edition of EN 41003:1998 was deemed necessary following the publication of EN 60950:1992/A4:1997, to re

19、flect further convergence of the two standards. This edition of EN 41003 was deemed necessary following the publication of EN 60950-1:2006 Information technology equipment Safety Part 1: General requirements (IEC 60950-1:2005, modified), to reflect further convergence of the two standards. _ BS EN 4

20、1003:2009 3 EN 41003:2008 Contents Introduction . 4 1 Scope 5 2 Normative references 5 3 Definitions 6 4 Safety requirements and compliance criteria 6 4.1 Interconnection of equipment General requirements . 6 4.2 TNV circuits . 6 4.3 Protection against contact with TNV circuits . 7 4.4 Protection of

21、 telecommunication network and/or cable distribution network service persons, and users of other equipment connected to the network, from hazards in the equipment 7 4.5 Protection of equipment users from overvoltages on telecommunication networks and/or cable distribution systems . 7 4.6 Protection

22、of the telecommunication wiring system from overheating 7 Annex A (informative) Relevant safety standards for the application of this European Standard . 8 Annex B (informative) Telecommunication network voltages and signals . 9 Bibliography 11 Figure Figure B.1 Current limit curves 16 BS EN 41003:2

23、009EN 41003:2008 4 Introduction This European Standard is needed for products intended to be connected to a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM not covered by the scope of EN 60950-1. It is to be used in conjunction with other product safety standards; examples of which are

24、listed in Annex A. Upper levels for TELECOMMUNICATION/CABLE DISTRIBUTION SYSTEM signals have been defined. They include also telephone ringing signals which have been defined taking into account voltages commonly used in the different networks. The electrical hazard criteria have been chosen to acco

25、rd with the IEC/TS 60479 series. Test levels used for the equipment take account of the possibility that overvoltages may occur on TELECOMMUNICATION AND CABLE DISTRIBUTION NETWORKS. Special consideration has been given to equipment parts expected to be held or touched during normal use, e.g. telepho

26、ne handsets. It is recognised that in high overvoltages risk areas, requirements of this European Standard may not be sufficient; additional protective devices, not covered by this European Standard, may be installed in the COMMUNICATION NETWORKS to better meet extreme conditions. For the adoption o

27、f this European Standard, the relevant special national conditions and A-deviations apply that are listed in Annexes ZB and ZC of EN 60950-1. BS EN 41003:2009 5 EN 41003:2008 1 Scope This European Standard applies to equipment designed and intended to be connected as a terminal to a TELECOMMUNICATIO

28、N NETWORK and/or a CABLE DISTRIBUTION SYSTEM termination. It does not apply to equipment covered by EN 60950-1 and EN 60065. This European Standard specifies the safety requirements of the interface to the TELECOMMUNICATION NETWORK and/or the CABLE DISTRIBUTION SYSTEM only and it does not specify an

29、y other safety requirements. It applies regardless of ownership or responsibility for installation or maintenance of the equipment, and regardless of the source of power. This European Standard, in accordance with the principles of safety given in the introduction of EN 60950-1, covers the requireme

30、nts and compliance criteria under three headings. Protection of equipment USERS from hazards in the equipment. The USER is considered to be protected from hazards in the equipment if the equipment complies with a relevant safety standard, for example one of those listed in Annex A, but compliance wi

31、th those standards is not part of this European Standard. Protection of SERVICE PERSONNEL working on a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM and other USERS of a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM, from hazardous conditions on a TELECOMMUNICATION NETW

32、ORK and/or a CABLE DISTRIBUTION SYSTEM resulting from the connection of the equipment. Protection of equipment USERS from voltages on a TELECOMMUNICATION NETWORK and/or a CABLE DISTRIBUTION SYSTEM. Requirements additional to those specified in this European Standard may be necessary for equipment in

33、tended for operation while exposed, for example, to extremes of temperature, to excessive dust, moisture, or vibration, to flammable gases, to corrosive or explosive atmospheres, electromedical applications with physical connections to the patient. The requirements for the following items are not co

34、vered by this European Standard: functional reliability of equipment; communication facilities with remote supply using hazardous voltage; protection of equipment, TELECOMMUNICATION NETWORKS and/or CABLE DISTRIBUTION SYSTEMS from damage. 2 Normative references The following referenced documents are

35、indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60950-1 2006 Information technology equipment Safety Part 1: General requirements (IE

36、C 60950-1:2005, mod) NOTE Lists of other related documents can be found in Annex A and in the Bibliography. BS EN 41003:2009EN 41003:2008 6 3 Definitions For the purposes of this document, the terms and definitions of EN 60950-1 apply. NOTE 1 Defined terms are printed in SMALL CAPITALS. NOTE 2 For i

37、nformation about TELECOMMUNICATION NETWORK voltages and signals, see Annex B. 4 Safety requirements and compliance criteria NOTE It is assumed that adequate measures according to ITU-T Recommendation K.11 have been taken to reduce the likelihood that the overvoltages presented to the equipment excee

38、d 1,5 kV peak. In installations where overvoltages presented to the equipment may exceed 1,5 kV peak, additional measures such as surge suppression may be necessary. The general conditions for tests of EN 60950-1, 1.4 apply. The references to the requirements of EN 60950-1, 4.2.2 and 4.2.3 may be re

39、placed by the corresponding requirements in other relevant safety standards listed in Annex A, if the equipment is designed to comply with one of these standards. 4.1 Interconnection of equipment General requirements EN 60950-1, 3.5.1 applies. 4.1.1 Types of interconnection circuits EN 60950-1, 3.5.

40、2 applies. 4.1.2 ELV circuits as interconnection circuits EN 60950-1, 3.5.3 applies. 4.1.3 Safety statements The safety status (SELV CIRCUIT, TNV-1 CIRCUIT; TNV-2 CIRCUIT; TNV-3 CIRCUIT, LIMITED CURRENT CIRCUIT, ELV CIRCUIT AND HAZARDOUS VOLTAGE) of interconnection points for the connection to other

41、 equipment shall be stated in the manufacturers documentation supplied with the equipment. 4.2 TNV circuits 4.2.1 Limits EN 60950-1, 2.3.1 applies. 4.2.2 Separation of TNV circuits from other circuits and from accessible parts EN 60950-1, 2.3.2 applies. The WORKING VOLTAGE of the insulation shall be

42、 specified by the manufacturer of the equipment. 4.2.3 Separation from hazardous voltages EN 60950-1, 2.3.3 applies. 4.2.4 Connection of TNV circuits to other circuits EN 60950-1, 2.3.4 applies. BS EN 41003:2009 7 EN 41003:2008 4.2.5 Test for operating voltages generated externally EN 60950-1, 2.3.5

43、 applies. 4.3 Protection against contact with TNV circuits 4.3.1 Protection in operator access areas 4.3.1.1 Access to energized parts For TNV CIRCUITS EN 60950-1, 2.1.1.1 applies. 4.3.1.2 Battery compartments For TNV CIRCUITS EN 60950-1, 2.1.1.2 applies. 4.3.2 Protection in service access areas For

44、 TNV CIRCUITS EN 60950-1, 2.1.2 applies. 4.3.3 Protection in restricted access location For TNV CIRCUITS EN 60950-1, 2.1.3 applies. 4.4 Protection of TELECOMMUNICATION NETWORK and/or cable distribution network service persons, and users of other equipment connected to the network, from hazards in th

45、e equipment 4.4.1 Protection from hazardous voltages EN 60950-1, 6.1.1 or relevant parts of 7 respectively applies. 4.4.2 Use of protective earthing EN 60950-1, 2.6.5.8 applies. For the protective earthing of TNV CIRCUITS EN 60950-1, 2.6.1 (items c), d), and f), 2.6.3, and 2.6.4 apply. 4.4.3 Separat

46、ion of the TELECOMMUNICATION NETWORK from earth EN 60950-1, 6.1.2 or relevant parts of 7 respectively applies. 4.4.4 Touch current to TELECOMMUNICATION NETWORKS and CABLE DISTRIBUTION SYSTEM and from TELECOMMUNICATION NETWORKS EN 60950-1, 5.1.8 applies. 4.4.5 Summation of touch currents from TELECOM

47、MUNICATION NETWORKS EN 60950-1, 5.1.8.2 applies. 4.5 Protection of equipment users from overvoltages on TELECOMMUNICATION NETWORKS and/or CABLE DISTRIBUTION SYSTEMS EN 60950-1, 6.2.1 and 6.2.2 or relevant parts of 7 respectively apply. 4.6 Protection of the telecommunication wiring system from overh

48、eating EN 60950-1, 6.3 applies. BS EN 41003:2009EN 41003:2008 8 Annex A (informative) Relevant safety standards for the application of this European Standard This Annex lists some examples of IEC and CENELEC product safety standards with which this European Standard may be used. NOTE When an interna

49、tional publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60335 (mod) Series Household and similar electrical appliances - Safety EN 60335 Series IEC 60601-1 A1 A2 + corr. June 1988 1991 1995 1995 Medical electrical equipment - Part 1: General requirements for safety EN 60601-1 + corr. July A1 + corr. July A2 A13 1990 1994 1993 1994 1995 1996 IEC 60601-1 2005 Medical electrical equipmen