EN 50152-3-3-2016 en Railway applications - Fixed installations - Particular requirements for a c switchgear - Part 3-3 Measurement control and protection devices for specific use .pdf

1、Railway applications Fixed installations Particular requirements for a.c. switchgearPart 3-3: Measurement, control and protection devices for specific use in a.c. traction systems Voltage transformersBS EN 50152-3-3:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:0

2、6National forewordThis British Standard is the UK implementation of EN 50152-3-3:2016.It supersedes BS EN 50152-3-3:2001 which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/9, Railway Electrotechnical Applications, to SubcommitteeGEL/9/3, Railway Electr

3、otechnical Applications - Fixed Equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards

4、Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 88379 8ICS 29.130.20; 29.280Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016. Am

5、endments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 50152-3-3:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50152-3-3 June 2016 ICS 29.130.20; 29.280 Supersedes EN 50152-3-3:2001English Version Railway applications - Fixed installations - Particular require

6、ments for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers Applications ferroviaires - Installations fixes - Spcifications particulires pour appareillage courant alternatif - Partie 3-3: Dispositifs de mesure, de

7、 commande et de protection pour usage spcifique dans les systmes de traction courant alternatif - Transformateurs de tension Bahnanwendungen - Ortsfeste Anlagen - Besondere Anforderungen an Wechselstrom-Schalteinrichtungen - Teil 3-3: Mess-, Steuerungs- und Schutzeinrichtungen fr Wechselstrom-Bahnan

8、lagen - Spannungswandler This European Standard was approved by CENELEC on 2016-04-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date li

9、sts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

10、under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark,

11、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Commi

12、ttee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENE

13、LEC Members. Ref. No. EN 50152-3-3:2016 EBS EN 50152-3-3:2016EN 50152-3-3:2016 (E) 2 Contents Page European foreword . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviations 5 3.1 Terms and definitions . 5 3.2 Abbreviations . 6 4 Service conditions . 7 5 Rating 7 5.1 General . 7

14、 5.2 Nominal voltage (Un) . 7 5.3 Rated voltage (UNe) 7 5.4 Insulation coordination . 7 5.4.1 General . 7 5.4.2 Rated insulation level 7 5.5 Rated frequency . 8 5.6 Rated output . 8 5.7 Rated accuracy class 8 5.8 Standard values of rated voltages . 8 5.9 Standard values of rated voltage factor 8 5.1

15、0 Ferroresonance 9 6 Design and construction 9 6.1 General . 9 6.2 Transformer construction . 9 6.3 Requirements for the external insulation . 9 6.4 Nameplates . 9 7 Tests . 9 7.1 General . 9 7.2 Ferroresonance withstand test 10 7.3 Partial discharge test 10 8 Rules for transport, storage, erection,

16、 operation and maintenance 10 9 Safety 10 10 Influence of the product on the environment . 10 11 Information to be given with enquiries, tenders and orders . 11 Bibliography 12 Tables Table 1 Nominal voltages (Un), rated voltages (UNe), rated impulse voltages (UNi) and power-frequency withstand volt

17、age (Ud) for circuits connected to the contact line 8 Table 2 Partial discharge test voltages and permissible levels for voltage transformers with solid insulation 10 BS EN 50152-3-3:2016EN 50152-3-3:2016 (E) 3 European foreword This document (EN 50152-3-3:2016) has been prepared by SC 9XC “Electric

18、 supply and earthing systems for public transport equipment and ancillary apparatus (Fixed installations)” of CLC/TC 9X “Electrical and electronic applications for railways”. The following dates are fixed: latest date by which the existence of this document has to be announced at national level (doa

19、) 2016-10-25 latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-04-25 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2019-04-25 This document s

20、upersedes EN 50152-3-3:2001. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This standard was revised to reflect the latest versions of standard

21、s referenced and to remove text already included in the EN 61869 Series. The structure of the document was adapted to that of EN 50152-1 and EN 50152-2. Ratings have been added to provide designations in line with other railway standards e.g. EN 50124. Tests requirements have been detailed to meet o

22、perating conditions of railway applications. Partial discharge voltages have been specified in Table 2. This standard has to be read in conjunction with EN 61869-1:2009 and EN 61869-3:2011. Where a particular clause/subclause of EN 61869-3 is not mentioned in this standard, that clause/subclause app

23、lies as far as reasonable. Where requirements relate exclusively to three-phase systems or to voltages outside those in use in traction systems, they are not applicable. Where this standard states “addition” or “replacement”, the relevant text of EN 61869-3 is to be adapted accordingly. The numberin

24、g of clauses in EN 61869 Series is similar to that in the EN 50152 Series. Where terms defined in EN 61869-1 and EN 61869-3 conflict with definitions of the same terms as given in IEC 60050-811:1991 or of the other railway applications documents listed in the normative references, the definitions in

25、 EN 61869-1 and EN 61869-3 are to be used. NOTE The suffix N which appears in this standard for rated values is not present in EN 618691 and EN 618693. References in subclauses of EN 61869-1 and EN 61869-3 have to be replaced by references to applicable subclauses in this standard as far as reasonab

26、ly possible. BS EN 50152-3-3:2016EN 50152-3-3:2016 (E) 4 EN 50152 Series under the generic title “Railway applications - Fixed installations - Particular requirements for a.c. switchgear” is divided as follows: Part 1: Circuit-breakers with nominal voltage above 1 kV; Part 2: Disconnectors, earthing

27、 switches and switches with nominal voltage above 1 kV; Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems Devices; Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems Current transformers; Part 3-3: Measurement

28、, control and protection devices for specific use in a.c. traction systems Voltage transformers. BS EN 50152-3-3:2016EN 50152-3-3:2016 (E) 5 1 Scope This EN 50152-3-3 is applicable to new voltage transformers which are: intended for use in indoor or outdoor fixed installations in tractions systems,

29、and operated with an a.c. line voltage and frequency as specified in EN 50163. NOTE 1 EN 50163 specifies the a.c. traction systems 15 kV 16,7 Hz and 25 kV 50 Hz. NOTE 2 As rails of a.c. traction systems are typically connected to earth and included in the return current path, all phase to earth volt

30、ages are subject to the limits as given in EN 50163. Nevertheless conductor to conductor voltages are some times higher e.g. in autotransformer systems. Voltage transformers are mainly used with: measuring instruments, protective devices. This EN 50152-3-3 also applies to voltage transformers other

31、than inductive types as far as reasonably possible. Requirements of this EN 50152-3-3 have priority. NOTE 3 Combined current and voltage transformers also capacitive voltage transformers are typically not used in fixed installations in traction systems. 2 Normative references The following documents

32、, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50124-1:2001, Railway appli

33、cations - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment EN 50125-2:2002, Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations EN 50152 (series), Railway applicatio

34、ns - Fixed installations - Particular requirements for a.c. switchgear EN 50163:2004, Railway applications - Supply voltages of traction systems EN 61869-1:2009, Instrument transformers - Part 1: General requirements (IEC 61869-1:2007, mod.) EN 61869-3:2011, Instrument transformers - Part 3: Additio

35、nal requirements for inductive voltage transformers (IEC 61869-3:2011) 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN 61869-1:2009 and EN 61869-3:2011 except of 3.2.1 to 3.2.9 and the following apply. NOTE Ter

36、ms 3.2.1 to 3.2.3 of EN 618691:2009 address voltage definitions which are differently defined in railway systems. Terms 3.2.4 to 3.2.9 of EN 618691:2009 address aspects specific to three-phase systems. BS EN 50152-3-3:2016EN 50152-3-3:2016 (E) 6 3.1.1 nominal voltage Unsuitable approximate voltage v

37、alue used to designate or identify a given supply system Note 1 to entry: This value is also assigned to the voltage transformer to show its usability in the supply system. Note 2 to entry: An autotransformer-System which is supplied with 2 phases, having a phase shift of 180 between them, is common

38、ly named 2 x Unaccording to the Unsupplied to the contact line system. Source: EN 50124-1:2001, 1.3.2.1 3.1.2 rated voltage UNevalue of voltage assigned by the manufacturer to the equipment or part of it and to which operating and performance characteristics are referred Note 1 to entry: This value

39、is also used to determine its dielectric characteristics and will be used instead of the rated insulation voltage (UNm) as defined and used in EN 501241. Note 2 to entry: The abbreviations Uprand Usrare used as specified in EN 618693 e.g. to determine the rated transformation ratio. SOURCE: EN 50124

40、-1:2001, 1.3.2.3, modified 3.1.3 overvoltage category OV numeral defining a transient overvoltage condition Note 1 to entry: This definition uses different wording as in other parts of EN 50152. SOURCE: IEC 60050-581:2008, 581-21-02 modified: note 1 to entry added 3.1.4 pollution degree PD numeral c

41、haracterizing the expected pollution of the micro-environment Note 1 to entry: This definition uses different wording as in other parts of EN 50152. SOURCE: IEC 60050-581:2008, 581-21-07 modified: note 1 to entry added 3.2 Abbreviations For the purposes of this document, the abbreviations given in 3

42、.7 of EN 61869-3:2011 apply, but are amended by the following index. OV Overvoltage category PD Pollution Degree Unnominal voltage UNerated voltage BS EN 50152-3-3:2016EN 50152-3-3:2016 (E) 7 4 Service conditions Clause 4 of EN 61869-1:2009 is applicable with the following modifications: the minimum

43、 ambient air temperature under normal service conditions for indoor voltage transformers shall be 5C; subclause 4.4 does not apply; NOTE 1 This subclause specifies possible scenarios of three-phase systems star-point earthing. for special service conditions, agreement shall be made between purchaser

44、 and supplier. EN 50125-2 should be taken as guidance for the selection of appropriate classifications. NOTE 2 The altitude reference of EN 501241 (up to 2 000 m) applies to insulation coordination only and is not considered in this standard. 5 Rating 5.1 General Clause 5 of EN 61869-3:2011 is appli

45、cable except as noted in 5.2 to 5.10 below: NOTE References in this standard typically name EN 618693:2011 only. Nevertheless clauses of EN 618693:2011 normally reference to EN 618691:2009 and specify the deviations to it. 5.2 Nominal voltage (Un) The standard values of nominal voltage Unare 15 kV a

46、nd 25 kV as listed in Table 1 of EN 50163:2004. 5.3 Rated voltage (UNe) Subclause 5.2 of EN 61869-1:2009 is not applicable. The rated voltage UNeshall be chosen taking into consideration the maximum voltage level suitable to be permanently applied to the voltage transformer (i.e. highest permanent v

47、oltage Umax1as defined in EN 50163). The value of UNeshall be used whenever EN 61869-1 or EN 61869-3 make reference to Umunless another value is named explicitly. NOTE 1 The insulation characteristics determined by applying Umax1are expected to be suitable to allow the highest non-permanent voltage

48、Umax2taken from EN 50163. NOTE 2 The rated voltage for fixed installations in railway applications is a phase to earth value. 5.4 Insulation coordination 5.4.1 General Insulation coordination shall be conducted according to EN 50124-1 e.g. selection of values for Over Voltage category (OV) and Pollu

49、tion Degree (PD). The rated voltage UNeshall be used when EN 50124-1 refers to the rated insulation voltage UNm. The definition of the four overvoltage categories shall be as in EN 50124-1:2001, 2.2.2.1 The definition of the seven pollution degrees shall be as in EN 50124-1:2001, 2.5 and Table A.4 5.4.2 Rated insulation level Subclause 5.3 of EN 61869-1:2009 is replaced by the following: BS EN 50152-3-3:2016EN 50152-3-3:2016 (E) 8 The values of the rated impulse withstand voltage UNiand of the powe