EN 50173-1-2011 en Information technology - Generic cabling systems - Part 1 General requirements《信息技术 综合布线系统 第1部分 一般要求》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50173-1:2011Information technology Generic cabling systemsPart 1: General requirementsBS EN 50173-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK im

2、plementation of EN 50173-1:2011.It supersedes BS EN 50173-1:2007+A1:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCT/7, Telecommunications - Installation requirements.A list of organizations represented on this committee can beobtained on reques

3、t to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 69185 0ICS 33.040.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standar

4、d was published under the authority of theStandards Policy and Strategy Committee on 31 July 2011.Amendments issued since publicationDate Text affectedBS EN 50173-1:2011EUROPEAN STANDARD EN 50173-1 NORME EUROPENNE EUROPISCHE NORM May 2011 CENELEC European Committee for Electrotechnical Standardizati

5、on Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50173-1:2011 E ICS 33.

6、040.50 English version Information technology - Generic cabling systems - Part 1: General requirements Technologies de linformation - Systmes de cblage gnrique - Partie 1: Exigences gnrales Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 1: Allgemeine Anforderungen This Eu

7、ropean Standard was approved by CENELEC on 2011-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen

8、ces concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC mem

9、ber into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary

10、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50173-1:2011EN 50173-1:2011 2 Foreword This European Standard was prepared by the Technical Committee CENE

11、LEC TC 215, Electrotechnical aspects of telecommunication equipment. This 3rdedition of EN 50173-1 replaces the text of EN 50173-1:2007, EN 50173-1:2007/A1:2009 and consolidates these two standards with the text of EN 50173-1:2007/FprAB:2010 for the convenience of the user of the standard. The text

12、of draft amendment EN 50173-1:2007/FprAB was submitted to the Formal Vote and was approved by CENELEC to amend EN 50173-1:2007 on 2011-04-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held respon

13、sible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-04-01 latest date by which the national standards conflicting with th

14、e EN have to be withdrawn (dow) 2014-04-01 The previous editions of European Standards EN 50173:1995 and EN 50173-1:2002 have been developed to enable the application-independent cabling to support ICT applications in office premises. Their basic principles, however, are applicable to other types of

15、 applications and in other types of premises. TC 215 has decided to establish relevant European Standards which address the specific requirements of these premises. In order to point out the commonalities of these cabling design standards, these ENs are published as individual parts of the series EN

16、 50173, thus also acknowledging that standards users recog-nize the designation “EN 50173” as a synonym for generic cabling design. At the time of publication of this European Standard, series EN 50173 comprises the following standards: EN 50173-1 Information technology Generic cabling systems Part

17、1: General requirements EN 50173-2 Information technology Generic cabling systems Part 2: Office premises EN 50173-3 Information technology Generic cabling systems Part 3: Industrial premises EN 50173-4 Information technology Generic cabling systems Part 4: Homes EN 50173-5 Information technology Ge

18、neric cabling systems Part 5: Data centres This edition of EN 50173-1: a) contains a change of electromagnetic parameters in the MICE classification (Table 3); b) introduces new component Categories 6Aand 7Ain accordance with the channel Classes EAand FAdefined in EN 50173-1:2007/A1:2009; c) modifie

19、s insertion loss requirements for coaxial channels; d) modifies optical fibre Class OF-100 media and defines a new cabled optical fibre Category OM4; e) amends and modifies connecting hardware requirements, defines both a new interface for 2 optical fibres and for 12 and 24 fibres; f) introduces lim

20、its for additional parameters in Annexes A, B and D.2; g) revises D.3 regarding test requirements for mechanical and environmental performance of connecting hardware; h) updates Annex F “Supported applications”; BS EN 50173-1:2011 3 EN 50173-1:2011 i) introduces a new normative Annex I “Test procedu

21、res to assess conformance with EN 50173 standards”; j) amends various other subclauses, tables and figures. BS EN 50173-1:2011EN 50173-1:2011 4 Contents Introduction . 121 Scope and conformance 151.1 Scope . 151.2 Conformance 152 Normative references . 153 Terms, definitions and abbreviations . 223.

22、1 Terms and definitions . 223.2 Abbreviations 294 Structure of generic cabling . 314.1 General . 314.2 Backbone functional elements . 314.3 General structure and hierarchy of backbone cabling subsystems . 314.4 Cabling subsystems . 324.5 Accommodation of functional elements . 334.6 Equipment Interfa

23、ces and test interfaces for backbone cabling 344.7 Dimensioning and configuring 345 Channel performance . 355.1 Environmental performance . 355.2 Transmission performance . 386 Reference implementations for backbone cabling . 686.1 General . 686.2 Balanced cabling 686.3 Coaxial cabling . 706.4 Optic

24、al fibre cabling 707 Cable requirements 717.1 General . 717.2 Operating environment . 727.3 Balanced cables of Categories 5, 6, 6A, 7, 7Aand BCT-B . 727.4 Other balanced cables . 747.5 Hybrid and multi-unit cables . 757.6 Coaxial cables 767.7 Optical fibre cables . 778 Connecting hardware requiremen

25、ts . 808.1 General requirements 808.2 Category 5, 6, 6A, 7, 7Aand BCT-B connecting hardware for balanced cabling 848.3 Category CCCB connecting hardware for balanced cabling . 878.4 Category BCT-C connecting hardware for coaxial cabling 898.5 Optical fibre connecting hardware 918.6 Connecting hardwa

26、re in accordance with EN 60603-7 series . 93BS EN 50173-1:2011 5 EN 50173-1:2011 8.7 Connecting hardware in accordance with EN 61076-3-104 948.8 Connecting hardware in accordance with EN 61076-2-101 (Type D, 4 poles) 958.9 Connecting hardware for two optical fibres 958.10 Connecting hardware for mor

27、e than two optical fibres. 959 Requirements for cords and jumpers . 969.1 General . 969.2 Operating environment . 969.3 Balanced cords . 979.4 Coaxial cords 1019.5 Optical fibre cords 101Annex A (normative) Link performance limits 104A.1 Balanced cabling 104A.1.1 General . 104A.1.2 Link limits 105A.

28、2 Coaxial cabling Insertion loss 118A.3 Optical fibre cabling 119A.3.1 All-silica optical fibre cabling 119A.3.2 Plastic optical fibre cabling . 119A.3.3 Plastic clad silica optical fibre cabling 119Annex B (informative) Permanent link performance limits for maximum implementations (balanced and coa

29、xial cabling) . 120B.1 Balanced cabling 120B.1.1 General . 120B.1.2 Performance limits 120B.2 Coaxial cabling Performance limits Insertion loss 126Annex C Void 127Annex D (normative) Electrical, mechanical and environmental requirements of balanced connecting hardware 128D.1 Introduction . 128D.2 El

30、ectrical performance of Category 5, 6, 6A, 7 and 7Aand BCT-B connecting hardware 128D.2.1 Return loss . 128D.2.2 Insertion loss 129D.2.3 NEXT 129D.2.4 PSNEXT . 130D.2.5 FEXT 131D.2.6 PSFEXT . 132D.2.7 Propagation delay 132D.2.8 Delay skew . 133D.2.9 Input to output resistance . 133D.2.10 Input to ou

31、tput resistance unbalance . 133D.2.11 Current carrying capacity . 133BS EN 50173-1:2011EN 50173-1:2011 6 D.2.12 Transfer impedance . 134D.2.13 Unbalance attenuation . 135D.2.14 Coupling attenuation 136D.2.15 Insulation resistance 137D.2.16 Voltage proof 137D.2.17 Power sum alien NEXT (PSANEXT) 138D.

32、3 Mechanical and environmental performance . 139D.3.1 Introduction . 139D.3.2 Solderless connections 140D.3.3 Free and fixed connectors (modular plugs and jacks) . 140D.3.4 Other connecting hardware 141Annex E (informative) Electromagnetic characteristics of balanced cabling . 143Annex F (informativ

33、e) Supported applications 144F.1 Supported applications for balanced cabling . 144F.2 Supported applications for coaxial cabling . 144F.3 Supported applications for optical fibre cabling . 144G.1 General . 152G.2 The application of environmental classification 152G.2.1 MICE 152G.2.2 The channel envi

34、ronment . 152G.2.3 Component selection . 153G.3 The MICE system . 153G.4 Guidance with respect to environmental classification 159G.4.1 Mechanical environment 159G.4.2 Ingress protection environment 159G.4.3 Climatic and chemical environment . 159G.4.4 Electromagnetic environment . 159Annex I (norma

35、tive) Testing procedures to assess conformance with EN 50173 standards . 163I.1 General . 163I.2 Channel and link performance testing 163I.2.1 General . 163I.2.2 Testing balanced cabling channels and links . 164I.2.3 Testing optical fibre cabling channels and links . 164I.2.4 Channel and link test s

36、chedules 164Bibliography 167BS EN 50173-1:2011 7 EN 50173-1:2011 Figures Figure 1 Schematic relationship between the EN 50173 series and other relevant standards 13Figure 2 Structure of generic cabling 32Figure 3 Hierarchical structure of generic cabling . 32Figure 4 Interconnect and cross-connect m

37、odels . 34Figure 5 Test and equipment interfaces for backbone cabling . 34Figure 6 Backbone cabling model . 69Figure 7 Pin grouping and pair assignments for EN 60603-7 series connecting hardware (front view of connector) 94Figure 8 Pin grouping and pair assignments for EN 61076-3-104 connecting hard

38、ware (front view of connector) 95Figure 9 Four position jack pin and pair grouping assignments for EN 61076-2-101 connecting hardware (front view of connector) 95Figure 10 Optical fibre assignments for connecting hardware for two optical fibres . 95Figure 11 Optical fibre assignments for connecting

39、hardware for 12 and 24 optical fibres (front view of fixed or free connector) 96Figure A.1 Link options 104Figure G.1 Variation of the environment along a cabling channel 153Figure G.2 The local environment . 153Figure G.3 Noise Ranges of Common Industrial Machine Devices 159Figure H.1 Balanced cabl

40、e naming schema 161Figure H.2 Balanced cable construction types 162Tables Table 1 Contextual relationship between EN 50173 series and other standards relevant for information technology cabling systems 14Table 2 Channel environments . 35Table 3 Details of Environmental Classification 37Table 4 Formu

41、lae for return loss limits for a channel 40Table 5 Return loss limits for a channel at key frequencies 41Table 6 Formulae for insertion loss limits for a channel 41Table 7 Insertion loss limits for a channel at key frequencies . 42Table 8 Formulae for NEXT limits for a channel . 43Table 9 NEXT limit

42、s for a channel at key frequencies 43Table 10 Formulae for PSNEXT limits for a channel 44Table 11 PSNEXT limits for a channel at key frequencies 44Table 12 ACR-N limits for a channel at key frequencies . 45Table 13 PSACR-N limits for a channel at key frequencies 46Table 14 Formulae for ACR-F limits

43、for a channel 47Table 15 ACR-F limits for a channel at key frequencies . 47Table 16 Formulae for PSACR-F limits for a channel . 48BS EN 50173-1:2011EN 50173-1:2011 8 Table 17 PSACR-F limits for a channel at key frequencies 48Table 18 d.c. loop resistance limits for a channel . 49Table 19 d.c. loop r

44、esistance unbalance limits for a channel 49Table 20 Minimum current carrying capacity. 50Table 21 Formulae for propagation delay limits for a channel 51Table 22 Propagation delay limits for a channel at key frequencies . 51Table 23 Delay skew limits for a channel 52Table 24 Formulae for TCL limits f

45、or an unscreened cabling channel 53Table 25 TCL limits for an unscreened cabling channel at key frequencies . 54Table 26 Formulae for ELTCTL limits for an unscreened cabling channel . 55Table 27 ELTCTL limits for an unscreened cabling channel at key frequencies 55Table 28 Formulae for coupling atten

46、uation limits for a screened cabling channel 56Table 29 Coupling attenuation limits for a screened cabling channel at key frequencies 57Table 30 Formulae for PSANEXT limits for a channel 58Table 31 PSANEXT limits for a channel at key frequencies . 59Table 32 Formulae for PSANEXTavglimits for a chann

47、el . 60Table 33 PSANEXTavglimits for a channel at key frequencies 60Table 34 Formulae for PSAACR-F limits for a channel . 61Table 35 PSAACR-F limits for a channel at key frequencies 61Table 36 Formulae for PSAACR-Favglimits for a channel . 62Table 37 PSAACR-Favglimits for a channel at key frequencies 62Table 38 Return loss limits for a Class BCT-C channel 64Table 39 Formulae for insertion loss limits for a channel 65Table 40 Insertion loss limits for a