1、BRITISH STANDARDBS EN 50173-3:2007Informationtechnology Genericcabling systems Part 3: Industrial premisesICS 35.110g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g
2、43g55g3g47g36g58+A1:2010Incorporating corrigendum May 2011National forewordThis British Standard is the UK implementation ofThe start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CENELEC text carry the number of the CENELEC amendm
3、ent. For example, text altered by CENELEC amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee TCT/7, Telecommunications Installation requirements.A list of organizations represented on this committee can be obtained on request to its secretary
4、. In addition to the requirements listed in sub-clause 1.2, conformance to BS EN 50173-3 also requires the application of BS 6701.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Stan
5、dard cannot confer immunity from legal obligations. BS EN 50173-3:2007+A1:2010This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI 2011Amendments/corrigenda issued since publicationDate Comments 30 April 2011 Implementaion of
6、CENELEC amendment A1:201ISBN 978 0 580 75575 0The start and finish of text introduced or altered by corrigendum isindicated in the text by tags. Text altered by CENELEC corrigendum May 2011 is indicated in the text .Implementation of CENELEC corrigendum May 201131 October 2011EN 50173-3:2007+A1:2011
7、, incorporating corrigendum May 2011.It supersedes BS EN 50173-3:2007, which is withdrawn.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM e 20 0 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische
8、Normung Central Secretariat: 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50173-3:2007 E ICS 35.110 English version Information technology - Generic cabling systems - Part 3: Industrial premises Technologies de linformatio
9、n - Systmes de cblage gnrique - Partie 3: Btiments du secteur industriel Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 3: Industriell genutzte Standorte This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply with the CEN/CENELEC
10、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENE
11、LEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
12、 CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slo
13、vakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. D cember 1Avenue Marnix 17, B - 1000 Brussels Incorporating corrigendum May 2011EN 50173-3:2007+A1 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 215, Electrotechnical aspects of telecommuni
14、cation equipment. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50173-3 on 2007-09-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (do
15、p) 2008-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-09-01 The European Standards EN 50173:1995 and EN 50173-1:2002 have been developed to enable the application-independent cabling to support ICT applications in office premises. Their bas
16、ic principles, however, are applicable to other types of applications and in other types of premises. TC 215 has decided to establish relevant European Standards which address the specific requirements of these premises. In order to point out the commonalities of these cabling design standards, thes
17、e EN are published as individual parts of the series EN 50173, thus also acknowledging that standards users recognize the designation “EN 50173” as a synonym for generic cabling design. At the time of publication of this European Standard, series EN 50173 comprises the following standards: EN 50173-
18、1 Information technology Generic cabling systems Part 1: General requirements EN 50173-2 Information technology Generic cabling systems Part 2: Office premises EN 50173-3 Information technology Generic cabling systems Part 3: Industrial premises EN 50173-4 Information technology Generic cabling syst
19、ems Part 4: Homes EN 50173-5 Information technology Generic cabling systems Part 5: Data centres This European Standard, EN 50173-3, contains specific requirements for generic cabling systems intended to be operated in industrial premises, referencing the general requirements of . It is basedupon bu
20、t is not identical to ISO/IEC 24702:2006, Information technology - Generic cabling - Industrial premises. BS EN 50173-3:2007+A1:2010EN 50173-3:2007+A1:2010 (E)EN 50173-1:2011 - 3 - ForewordThis amendment was prepared by the Technical Committee CENELEC TC 215, Electrotechnical aspects of telecommunic
21、ation equipment. The text of the draft was submitted to the formal vote and was approved by CENELEC as amendment A1 to EN 50173-3:2007 on 2010-12-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be hel
22、d responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-12-01 latest date by which the national standards conf
23、licting with the amendment have to be withdrawn (dow) 2013-12-01 This standard introduces several changes in order to align the standard with the changes resulting from the introduction of new Channel classes and component Categories in . Furthermore,it updates requirements for optical fibre connect
24、ing hardware. For the convenience of the reader of this standard, the pertinent tables are reproduced in total, with grey shading of new table cells. Where modifications to text apply to single expressions or a few words only, this is indicated by underlining. to amendment A1 BS EN 50173-3:2007+A1:2
25、010EN 50173-3:2007+A1:2010 (E)EN 50173-1:2011 - 4 - Contents Introduction .1 Scope and conformance 1.1 Scope11.2 Conformance.2 Normative references .13 Definitions and abbreviations11 3.1 Definitions11 3.2 Abbreviations.12 4 Structure of the generic cabling system in industrial premises13 4.1 Genera
26、l .13 4.2 Functional elements.13 4.3 Cabling subsystems.13 4.4 Interconnection of subsystems.16 4.5 Accommodation of functional elements17 4.6 Interfaces 18 4.7 Dimensioning and configuring 18 5 Channel performance in industrial premises 5.1 General .20 5.2 Environmental performance .21 5.3 Transmis
27、sion performance.21 6 Reference implementations in industrial premises23 6.1 General .23 6.2 Balanced cabling .23 6.3 Optical fibre cabling .25 7 Cable requirements in industrial premises.27 7.1 General .27 7.2 Balanced cables 27 7.3 Optical fibre cables 28 8 Connecting hardware requirements in indu
28、strial premises.28 8.1 General requirements 28 8.2 Connecting hardware for balanced cabling.28 8.3 Connecting hardware for optical fibre cabling .29 9 Requirements for cords and jumpers in industrial premises 31 9.1 General .31 9.2 Jumpers 31 9.3 Balanced cords31 9.4 Optical fibre cords31 Annex A (n
29、ormative) Permanent link performance limits.32 Annex B (normative) Reference implementations that do not conform to Clause 4.34 Annex C (informative) Alternative cabling implementations 39 Bibliography 41 BS EN 50173-3:2007+A1:2010EN 50173-3:2007+A1:2010 (E)6 10 0 10 1 20- 5 - Figures Figure 1 - Cab
30、ling specified by EN 50173-3 and its relationship to OSI reference model layers . 7 Figure 2 - Schematic relationship between the EN 50173 series and other relevant standards 8 Figure 3 - Configuration of apparatus-based functional elements within industrial premises. 14 Figure 4 - Structure of gene
31、ric cabling for industrial environment. 14 Figure 5 - Hierarchical structure of generic cabling for industrial premises. 16 Figure 6 - Inter-relationship of functional elements in an installation with diversity for protection against failure. 16 Figure 7 - Accommodation of functional elements . 17 F
32、igure 8 - Test and equipment interfaces 18 Figure 9 - Transmission performance of a channel 20 Figure 10 - Example of a system showing the location of cabling interfaces and extent of associated channel 21 Figure 11 - Intermediate cabling models 24 Figure 12 - Combined optical fibre intermediate/flo
33、or channels 26 Figure A.1 - Permanent link options 32 Figure B.1 - Channel configurations with no connections 34 Figure B.2 - Channel configurations with balanced cabling inter-connections 35 Figure B.3 - Channel configurations with balanced cabling bulkhead connections . 36 Figure C.1 - Alternative
34、 channel configurations . 39 Tables Table 1 - Contextual relationship between EN 50173 series and other standards relevant for information technology cabling systems 9 Table 2 - Intermediate cabling channel equations.24 Table 3 - Channel length equations for plastic and plastic clad silica optical f
35、ibre cabling27 Table B.1 - Channel equations for balanced cabling.36 Table B.2 - Channel equations for bulkhead connections .37 Table C.1 - Alternative channel equations BS EN 50173-3:2007+A1:2010EN 50173-3:2007+A1:2010 (E)40- 6 - Introduction The importance of the information technology cabling inf
36、rastructure is similar to that of other utilities such as heating, lighting and electricity supplies. As with other utilities, interruptions to service can have serious impact. Poor quality of service due to lack of planning, use of inappropriate components, incorrect installation, poor administrati
37、on or inadequate support can threaten an organisations effectiveness. Historically, the cabling within premises comprised both application-specific and multipurpose networks. Standards within the EN 50173 series have enabled a controlled migration to generic cabling (with an associated reduction in
38、the use of application-specific cabling) and supported the development of high data rate applications based upon defined cabling models. This European Standard, EN 50173-3, recognizes the benefit of generic cabling to interconnect several pieces of apparatus within industrial premises (within and be
39、tween structures and buildings) and is to be read in conjunction with EN 50173-1. This European Standard provides, for industrial premises: a) users with an application independent generic cabling system and an open market for cabling components; b) requirements for infrastructures that support crit
40、ical automation, process control and monitoring applications in a range of industrial environments; c) users with a flexible cabling scheme such that modifications are both easy and economical; d) building professionals (for example, architects), production and control engineers with guidance allowi
41、ng the accommodation of cabling both before specific requirements are known, i.e. in the initial planning either for construction or refurbishment, and for further deployment as the requirements of specific industrial areas are defined; e) industry and standardisation bodies with a cabling system wh
42、ich supports current products and provides a basis for future product development and applications standardisation. This European Standard specifies multi-vendor cabling, and is related to: - the associated standard covering general requirements for generic cabling within premises (EN 50173-1); - st
43、andards for cabling components developed by Technical Committees of CENELEC and/or IEC; - standards for the quality assurance and installation of information technology cabling (series EN 50174) and testing of installed cabling (EN 50346); - applications developed by the technical bodies of IEC (inc
44、luding the subcommittees of ISO/IEC JTC 1), study groups of ITU-T and CENELEC TC 65CX “Fieldbus”. Within this European Standard the cabling, defined between the interfaces shown in Figure 1, contains passive components only. The applications listed in , Annex F, have been analysed to determine the r
45、equirements for a generic cabling system. These requirements, together with statistics concerning premises geography from different countries and the models described in Clause 6, have been used to develop the requirements for cabling components and to stipulate their arrangement into cabling system
46、s. As a result, generic cabling defined within this European Standard is targeted at, but not limited to, industrial premises. It is anticipated that the generic cabling system meeting the minimum requirements of this European Standard will have a life expectancy consistent with other infrastructure
47、s within industrial premises. BS EN 50173-3:2007+A1:2010EN 50173-3:2007+A1:2010 (E)EN 50173-1:2011 - 7 - Figure 1 shows the relationship of generic cabling to the OSI reference model. DATA LINKPHYSICALNETWORKTRANSPORTSESSIONPRESENTATIONAPPLICATIONLLC orOTHER MAC CLIENTMEDIA ACCESS CONTROL(MAC)PHYSIC
48、AL(PHY)MDI MDIOSI REFERENCE MODELLAYERSCABLINGEN 50173-3 InterfaceHIGHER LAYERSLLC orOTHER MAC CLIENTMEDIA ACCESS CONTROL(MAC)PHYSICAL(PHY)HIGHER LAYERSFigure 1 - Cabling specified by EN 50173-3 and its relationship to OSI reference model layers Figure 2 and Table 1 show the schematic and contextual
49、 relationships between the standards produced by TC 215 for information technology cabling, namely: 1) this and other parts of the EN 50173 series; 2) application dependent cabling design (e.g. EN 50098 series); 3) installation (EN 50174 series); 4) testing of installed cabling (EN 50346); 5) equipotential bonding requirements (EN 50310). BS EN 50173-3:2007+A1:2010EN 50173-3:2007+A1:2010 (E)- 8 - In addition, a number of Technical Reports have been developed to support or extend the application of these standards, including: - CLC/TR
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1