EN 50289-4-16-2016 en Communication cables - Specifications for test methods - Part 4- 16 Environmental test methods - Circuit integrity under fire conditions.pdf

1、BS EN 50289-4-16:2016Communication cables Specifications for test methodsPart 4-16: Environmental test methods Circuit integrity under fire conditionsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 50289-4-16:2016 BRITISH STANDARDNational forewordThis British S

2、tandard is the UK implementation of EN 50289-4-16:2016. It supersedes BS EN 50289-4-16:2012 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signallin

3、g.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Stan

4、dards Limited 2016ISBN 978 0 580 93150 5 ICS 33.120.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2016.Amendments/corrigenda issued since publi

5、cationDate T e x t a f f e c t e dBS EN 50289-4-16:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50289-4-16 September 2016 ICS 33.120.10 Supersedes EN 50289-4-16:2012 English Version Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit i

6、ntegrity under fire conditions Cbles de communication - Spcifications des mthodes dessais - Partie 4-16: Mthodes dessais denvironnement - Intgrit du circuit en cas dincendie Kommunikationskabel - Spezifikationen fr Prfverfahren - Teil 4-16: Umweltprfverfahren - Funktionserhalt im Brandfall This Euro

7、pean Standard was approved by CENELEC on 2016-07-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference

8、s concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN

9、ELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugosla

10、v Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standar

11、dization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50289-4-

12、16:2016 E BS EN 50289-4-16:2016EN 50289-4-16:2016 (E) 2 Contents Page European foreword .3 1 Scope .4 2 Normative references .4 3 Circuit Integrity .4 3.1 General .4 3.2 Circuit integrity classification .5 4 Test procedure .5 4.1 Preliminary tests .5 4.2 EN 50200 6 4.3 EN 50577 6 4.4 Electrical test

13、 during fire 6 5 Requirements .6 6 Test report 6 Annex A (informative) Information regarding classification .8 A.1 General .8 A.2 Functional requirement (PH or P) and Interpretation .8 A.3 Classification 8 Bibliography 9 Tables Table 1 Maximum frequency required tests and requirements .5 Table 2 Cir

14、cuit integrity class 5 Table 3 Period between two measurements .6 Figure 1 Test fixture .6 BS EN 50289-4-16:2016EN 50289-4-16:2016 (E) 3 European foreword This document (EN 50289-4-16:2016) has prepared by CLC/TC 46X “Communication cables“. The following dates are fixed: latest date by which this do

15、cument hasto be implemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2017-07-22 latest date by which the nationalstandards conflicting with thisdocument have to be withdrawn(dow) 2019-07-22 Attention is drawn to the possibility that some of the elements

16、 of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 50289-4-16:2012. BS EN 50289-4-16:2016EN 50289-4-16:2016 (E) 4 1 Scope This European Standard, part of EN 50289, specifie

17、s the criteria for circuit integrity of control and communication cables wires, symmetric cables, and coaxial cables with metallic conductors for use in e.g. telecommunication, data transmission, radio frequency, video communication and signalling and control equipment. The test method is described

18、in EN 50200 and/or EN 50577. It is essential to use this European Standard with EN 50200 and/or EN 50577 for CPR purpose. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,

19、only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50117-1, Coaxial cables Part 1: Generic specification EN 50200:2006, Method of test for resistance to fire of unprotected small cables for use in emergency cir

20、cuits EN 50288-1, Multi-element metallic cables used in analogue and digital communication and control Part 1: Generic specification EN 50289 (all parts), Communication cables Specifications for test methods EN 50577, Electric cables Fire resistance test for unprotected electric cables (P classifica

21、tion) EN 13501-3:2005+A1:2009, Fire classification of construction products and building elements Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers 3 Circuit Integrity 3.1 General The cr

22、iteria that are used for defining fire resistant cables are deemed to demonstrate the ability of the cable to provide circuit integrity when subjected to fire. Circuit integrity (continuity of signal supply) is based upon the maximum frequency for which the cable is specified in combination with the

23、 related transmission performances. Compliance with this standard is not an indication that the cable will suite all types of applications or attack by any fire scenario. It only ensures that the circuit integrity as defined in Table 1 is maintained. This clause specifies characteristics that shall

24、be used to define the continuous maintenance of circuit integrity under fire conditions for communication cables. The High Frequency Circuit Integrity is deemed to be maintained if the transmission characteristics at the maximum frequency, given in Table 1 below for EN 50200 burner and for EN 50577

25、Furnace test, remains within the stated limits. The degradation allowed is normalised to % per metre as the burner in EN 50200 is 1 m and EN 50577 has 2,5 m exposed to heat. BS EN 50289-4-16:20165 Table 1 Single and multipairs Maximum frequency required tests and requirements Maximum Frequency High

26、frequency characteristicsb Test method Requirements for circuit integrity 100 KHz 26-15 Log10 (f/10) dB 1 to 10 MHz 100 MHz 8 dB 26-15 Log10 (f/10) dB 1 to 10 MHz awith the exception of EN 50288-7 and EN 50288-8. bDiscussions between Customer and Producer necessary when System requirements demand ot

27、her characteristics limits. High frequency characteristics shall be tested in accordance with EN 50288-1 for symmetrical cables. Table 2 Coax maximum frequency required tests and requirements Maximum Frequency High frequency characteristicsb Test method Requirements for circuit integrity 100 KHz 26-

28、15 Log10 (f/10) dB 1 to 10 MHz 100 MHz 8 dB 26-15 Log10 (f/10) dB 1 to 10 MHz awith the exception of EN 50288-7 and EN 50288-8. bDiscussions between Customer and Producer necessary when System requirements demand other characteristics limits. High frequency characteristics shall be tested in accorda

29、nce with EN 50117-1 for coaxial cables. 3.2 Circuit integrity classification Details regarding classification using data from this test are given in EN 13501-3:2005+A1:2009. Information regarding classification is given in EN 50200:2006, Annex D “Information regarding classification”. Test longer th

30、an those classified can be declared without the classification 4 Test procedure 4.1 Preliminary tests All cables shall be tested with EN 50289, electrical and mechanical tests as required by their relevant sectional specification before proceeding to the fire tests. EN 50289-4-16:2016 (E)BS EN 50289

31、-4-16:2016EN 50289-4-16:2016 (E) 6 4.2 EN 50200 The burner, temperature, test duration etc shall be as described in EN 50200. 4.3 EN 50577 The burner, temperature, test duration etc shall be as described in EN 50577. Length of cable to be tested inside the furnace should be defined depending on the

32、chosen installation route. Bending radius, tray type and clips used shall be reported. 4.4 Electrical test during fire A sample greater than 30 m shall be used and set up in the following way: For the EN 50200 test the shortest route from the burner to the test equipment shall be 10 m, the remaining

33、 20 m shall be either coiled ( 1,0 m coil) or laid straight in to the other side of the test equipment. For the EN 50577 test the route from the furnace building to the test equipment shall be 15 m, and each length outside the furnace housing shall be either coiled ( 1,0 m coil) or laid straight in

34、to the other side of the test equipment. During the application of fire, when the lengths are exposed either 1m in EN 50200 and 2,5 m in EN 50577, the parameters listed in Table 1 shall be periodically monitored according to the relevant method of EN 50289-1 series. Table 3 Maximum Period between ea

35、ch measurement 0 -30 min 30 -120 min 5 min 10 min Figure 1 Test fixture for EN 50200 5 Requirements During and after the application of fire, the degradation of parameters listed in Table 1 shall not be worse than the value given in the same table. The duration of survival is measured in minutes fro

36、m the start to the point of failure when the degradation of parameters exceeds the values given in Table1; it shall be recorded for each cable tested up to a maximum survival time of 120 min. 6 Test report The test report shall include the following information: BS EN 50289-4-16:2016EN 50289-4-16:20

37、16 (E) 7 1. full description of cable tested;2. manufacturer of cable tested;3. test laboratory;4. test equipment or devices used;5. type and disposition of clips supporting cable sample tested to EN 50200 or type of trays andplastic ties supporting cable sample tested to EN 50577;6. the actual cabl

38、e bending radius, clips and tray type used for the test;7. method used for temperature monitoring during the verification procedure;8. the duration of survival achieved;9. the number of this EN.BS EN 50289-4-16:2016EN 50289-4-16:2016 (E) 8 Annex A (informative) Information regarding classification A

39、.1 General The purpose of this annex is to provide information as to the derivation of the fire resistance classification (PH or P) for circuit integrity from test data. The classification shall be determined by reference to EN 13501-3. A.2 Functional requirement (PH or P) and Interpretation The cla

40、ssification is based on the ability of electrical cables or optical cables to maintain a reliable form of power supply or signal from the source to the safety installation(s) when exposed to fire. The performance criterion is continuity of power and/or signal supply. The PH classification refers to

41、a constant temperature attack of a notional 842 C. The P classification refers to an exposure to fire under the conditions of the standard time/temperature curve as per EN 1363-1. A.3 Classification The following classes are defined in the EC decision 2000/367/EC. Classification PH 15, 30, 60, 90, 1

42、20. In accordance with the requirements of EN 13501-3, the number of tests on each cable sample for classification is two. The measured duration of survival of both tests shall be equal to or exceed the stated classification (i.e. 15, 30, 60, 90 or 120 min). According to the time during which circui

43、t integrity is maintained, the cable is assigned to the class below depending upon the fire test that is used EN 50200 or EN 50577. Table A.1 Circuit integrity class Circuit integrity class EN 50200 Circuit integrity class EN 50577 Circuit integrity maintained for PH15 P15 15 min or more PH30 P30 30

44、 min or more PH60 P60 60 min or more PH90 P90 90 min or more PH120 120 120 min or more BS EN 50289-4-16:2016EN 50289-4-16:2016 (E) 9 Bibliography EN 1363-1, Fire resistance tests Part 1: General Requirements This page deliberately left blankThis page deliberately left blankBSI is the national body r

45、esponsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together

46、 business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizati

47、ons of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team

48、or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Dev

49、elopment Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, sha