1、BRITISH STANDARDBS EN 50308:2004Incorporating Corrigendum No. 1Wind turbines Protective measures Requirements for design, operation and maintenanceThe European Standard EN 50308:2004 has the status of a British StandardICS 27.180g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40
2、g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 50308:2004This British Standard was published under the authority of the Standards Policy and Strategy Committee on 22 September 2004 BSI 12 Decmber 2005ISBN 0 580 4
3、4506 2National forewordThis British Standard is the official English language version of EN 50308:2004, including Corrigendum September 2005.The UK participation in its preparation was entrusted to Technical Committee PEL/88, Wind turbine systems, which has the responsibility to: aid enquirers to un
4、derstand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented o
5、n this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by us
6、ing the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity fr
7、om legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 25 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Commen
8、ts15706 Corrigendum No. 112 December 2005 Corrections to EN Foreword and IntroductionEUROPEAN STANDARD EN 50308 NORME EUROPENNE EUROPISCHE NORM July 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotech
9、nische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50308:2004 E ICS 27.180 Incorporates Corrigendum February 2005English version Wind turbines Protective
10、measures Requirements for design, operation and maintenance Arognrateurs Mesures de protection Exigences pour la conception, le fonctionnement et la maintenance Windenergieanlagen Schutzmanahmen Anforderungen fr Konstruktion, Betrieb und Wartung This European Standard was approved by CENELEC on 2004
11、-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o
12、btained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the C
13、entral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe
14、rlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 50308:2004 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 88, Wind turbine systems. This standard concerning protective measures stands in conjunction with th
15、e set of European standards for wind turbines (EN 61400 series). The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50308 on 2004-03-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an id
16、entical national standard or by endorsement (dop) 2005-03-01 NOTE Revision of this standard will be undertaken as soon as possible. _ 3 EN 50308:2004 Contents Introduction.4 1 Scope.5 2 Normative references5 3 Definitions - Terminology 6 4 Safety requirements and protective measures .7 4.1 General r
17、equirements 7 4.2 Passages 7 4.3 Rooms / working areas 9 4.4 Floors, platforms, standing-, working places.9 4.5 Climbing facilities 10 4.6 Moving parts, guards and blocking devices 13 4.7 Lighting .13 4.8 Noise.14 4.9 Emergency stop.15 4.10 Power disconnection15 4.11 Fire protection .16 4.12 Warning
18、 signs .16 4.13 Offshore installation.16 4.14 Requirements for manuals and warnings17 4.15 Requirements for operation and maintenance (Information for use) 19 Annex A (informative) National informative annexes .21 A.0 Introduction21 A.1 Germany (DE)21 A.2 Denmark (DK)22 A.3 Spain (ES) .22 A.4 France
19、 (FR) .23 A.5 United Kingdom (GB) .24 A.6 Greece (GR) 24 A.7 Ireland (IE).24 A.8 Italy (IT).24 A.9 The Netherlands (NL).25 EN 50308:2004 4 Introduction The machinery concerned and the extent to which hazards, hazardous situations and events are covered is indicated in Clause 1 (Scope). This standard
20、 is a product (family) standard (according to EN 292-1) giving common requirements for the wind turbines mentioned in Clause 1 (Scope). The document contains a standard part and an informative annex. Annex A consists of national normative documents and/or regulations that specify either the present
21、safety requirements for personnel or give the national supplements to these minimum requirements at the time this standard was prepared (January 2000). The format of the standard is based, where possible, on a practical approach for manufacturers and designers who have to meet the requirements, auth
22、orities who have to check the design, owners who have legal responsibilities. For the determination of the hazards described in this standard EN 1050 should be applied. 5 EN 50308:2004 1 Scope This European Standard specifies requirements for protective measures relating to the health and safety of
23、personnel, relevant to commissioning, operation and maintenance of wind turbines. It does not describe instructions and provisions for safe working during manufacture, transport, assembly and installation of the wind turbine. Requirements are specified regarding hardware provisions being a part of t
24、he turbine such as platforms, ladders, lighting, manuals and warning signs to accommodate safe and quick operation, inspection and maintenance. The requirements and/or measures specified account for the hazards of mechanical origin such as falling, slipping, locking in, of thermal origin (fire) such
25、 as burns by flames or explosions, of electricity such as contact with live parts, generated by noise such as stress and loss of hearing, generated by neglecting ergonomic principles in machine design such as unhealthy postures or human errors. This standard is prepared for horizontal axis, grid con
26、nected wind turbines. For other concepts (e.g. vertical axis turbines) the principles are still valid, but the specific rules or requirements have to be adjusted to the actual concept. Additional provisions and procedures are necessary for turbines installed in water or offshore. The present documen
27、t only draws attention to these. Provisions and procedures for lifts and Suspended Access Equipment (SAE) in the turbine tower are not included in this standard. This standard is not applicable to wind turbines manufactured before the date of its publication by CENELEC. 2 Normative references The fo
28、llowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 292-1 Safety of machinery - Basic concepts, general
29、principles for design Part 1: Basic terminology, methodology EN 292-2 1991 Part 2: Technical principles and specifications EN 418 Safety of machinery - Emergency stop equipment, functional aspects Principles for design EN 457 1992 Safety of machinery - Auditory danger signals General requirements, d
30、esign and testing (ISO 7731:1986, mod.) EN 547-1 Safety of machinery - Human body dimensions Part 1: Principles for determining the dimensions required for openings for whole body access into machinery EN 50308:2004 6 EN 547-3 Safety of machinery - Human body dimensions Part 3: Anthropometric data f
31、or whole body access into machinery and access openings EN 563 Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces EN 795 Personal protective equipment against falls from a height Anchorage devices - Requirements and testing E
32、N 953 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 981 Safety of machinery System of auditory and visual danger information signals EN 982 Safety of machinery - Safety requirements for hydraulic and pneumatic systems and parts - Hydra
33、ulics EN 983 Safety of machinery - Safety requirements for hydraulic and pneumatic systems and parts - Pneumatics EN 1037 Safety of machinery Prevention of unexpected start up EN 1050 Safety of machinery Principles for risk assessment ISO 4871 1996 Acoustics Determination of sound power levels of no
34、ise sources using sound pressure Engineering method in an essentially free field over a reflecting plane EN ISO 11202 1995Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ EN ISO 1
35、1688-1 1998Acoustics Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning EN ISO 14122-1 1) Safety of machinery Part 1: Permanent means of access to machines and industrial plants - Choice of a fixed means of access between two levels EN ISO 14122-2 1) Part 2:
36、Working platforms and gangways EN ISO 14122-3 1) Part 3: Stairways, stepladders and guard-rails EN ISO 14122-4 1) Part 4: Fixed ladders EN 50160 Voltage characteristics of electricity supplied by public distribution systems EN 50172 Emergency escape lighting systems EN 50199 Electromagnetic compatib
37、ility (EMC) - Product standard for arc welding equipment ENV 1070 Safety of machinery Terminology ENV 61400-1 Wind turbine generating systems - Part 1: Safety requirements EN 61400-11 1998 Wind turbine generator systems Part 11: Acoustic noise measurement techniques (IEC 61400-11:1998) HD 472 Nomina
38、l voltages for low-voltage public electricity supply systems (IEC 60038, mod.) 3 Definitions Terminology For the purpose of this standard the definitions given in EN 292, ENV 61400-1 and EN ISO 4871 apply. 1)At draft stage. 7 EN 50308:2004 4 Safety requirements and protective measures 4.1 General re
39、quirements Wind turbines shall be designed according the principles of EN 292. The general principles to avoid risks to health and safety are laid down in Clause 5 of EN 292-1 (Strategy for selecting safety measures). The initial design of wind turbines must take account of how risks to the health a
40、nd safety of persons are to be minimised. Structural provisions include e.g. door-openings, access-openings, floors, platforms and railings, ladders with fall protection equipment, passages and working spaces, anchorage points and hand grips, lighting, guarding of moving parts, protection against el
41、ectrical hazards, sound barriers, noise isolation or thermal isolation. Some of these provisions have an effect on the structural integrity of the turbine e.g. door openings, doorstep height, access openings. The design shall include provisions for permanent safe access (ladders, platforms, anchorag
42、e points, lighting, etc.) to reach the locations for inspection and maintenance activities and to perform these activities safely. All items shall be safe during the turbine lifetime (providing that they are maintained according to the operators instruction manual and maintenance manual for the turb
43、ine). Accessible parts of the machinery shall have no sharp edges, no sharp angles and no rough surfaces likely to cause injury. Normal control of the wind turbine shall be possible without ascending to the turbine nacelle. Control panels shall be placed so that unintentional or erroneous operation
44、is prevented. If a wind turbine has more than one control panel/unit, it shall only be possible to operate it from one panel/unit at a time. Where remote operation of a wind turbine is possible (e.g. via a modem link) a local control switch shall be available to cut off the remote mode and all other
45、 control systems in the turbine with the exception of any emergency stop. It shall be possible to block, vent, release or isolate/disconnect any stored or trapped energy that can cause risk during maintenance where parts of the turbine are powered by an energy source other than wind, such as electri
46、cal energy inside a capacitor bank or battery, mechanical energy inside a spring loaded system or brake system, hydraulic energy inside pressurised accumulators, gravity. EN 982 shall be followed to release stored energy. EN 1037 shall be followed to prevent unexpected startup. 4.2 Passages Doors, h
47、atches, access and escape passages shall be in accordance with 6.0 of EN 292-2. Dimensions are based on EN 547-1 and EN 547-3. 4.2.1 Access All normal access points to wind turbines shall be equipped by the manufacturer with means to make the turbines inaccessible, so as to prevent unauthorised pers
48、ons from gaining access. In particular, access to the control panel, the machinery and electrical parts of the wind turbine by unauthorised persons shall be prevented. EN 50308:2004 8 Access ways, passages, doors and climbing provisions shall be designed with personnel safety in mind. They shall not
49、 to be obstructed by fixed auxiliary appliances, piping, wiring or by stored items. Doors being the entrance to the turbine and/or to rooms with electrical switch gear (having an escape function) shall have provision of unobstructed passage at least 0,6 m wide, which may have rounded off corners, no sharp edges likely to cause injury, a (additionally installed) horizontal part to step on of at least 0,3 m wide, a platform or floor inside and outside with a di
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1