EN 50377-11-1-2008 en Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1 Type MF terminated on IEC 60.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Connector sets and interconnectcomponents to be used in opticalfibre communication systems Product specifications

2、 Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category CBS EN 50377-11-1:2008National forewordThis British Standard is the UK implementation of EN 50377-11-1:2008.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre

3、optics, to Subcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible f

4、or its correct application. BSI 2009ISBN 978 0 580 62089 8ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 July 2009Amendments issued since publicat

5、ionAmd. No. Date Text affectedBRITISH STANDARDBS EN 50377-11-1:2008EUROPEAN STANDARD EN 50377-11-1 NORME EUROPENNE EUROPISCHE NORM February 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische No

6、rmung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-11-1:2008 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical

7、 fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produit -

8、 Partie 11-1: Type MF raccord sur une fibre unimodale des catgories B1.1 et B1.3 de la CEI 60793-2-50 pour la catgorie C Steckverbinderstze und Verbindungsbauelemente fr Lichtwellenleiter-Datenbertragungssysteme - Produktnormen - Teil 11-1: Bauart MF zum Anschluss an Einmodenfasern der Kategorien B1

9、1 und B1.3 nach IEC 60793-2-50 fr Kategorie C This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any al

10、teration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

11、 translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Eston

12、ia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50377-11-1:2008EN 50377-11-1:2008 2 Foreword This European St

13、andard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50377-11-1 on 2007-09-01. The following dates were fixed: latest d

14、ate by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-09-01 _ BS EN 50377-11-1:2008 3 EN 50377-11-1:2008 Conne

15、ctor sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C Description Performance Coupling mechanism: back plane Configuration: plug and socke

16、t Fibre Category: EN 60793-2-50 type B1.1 and B1.3 Cable Type: See Table 3 Application: Attenuation grades: (Random mated) Return loss grade: For use backplane application (test severities derived from IEC cat C) B: 0,12 dB mean 0,25 dB for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of me

17、asurements 2: 45 dB Related documents: EN 50173 Information technology Generic cabling systems EN 60794-2-30 Optical fibre cables Part 2-30: Indoor cables Family specification for optical fibre ribbon cables (IEC 60794-2-30) EN 61300 series Fibre optic interconnecting devices and passive components

18、Basic test and measurement procedures (IEC 61300 series) EN 60793-2 Optical fibres Part 2: Product specifications General (IEC 60793-2) EN 61753-1 Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards (IEC 61753-1) EN 6

19、1754-5 Fibre optic connector interfaces Part 5: Type MT connector family (IEC 61754-5) EN 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres General and guidance (IEC 61755-1) EN 61755-3-31)Fibre optic connector optical interface

20、s Part 3-3: Optical interface angled PC endface rectangular ferrule, single mode fibres (IEC 61755-3-3) 1)At draft stage. BS EN 50377-11-1:2008EN 50377-11-1:2008 4 Contents 1 Scope. 6 1.1 Product definition. 6 1.2 Intermateability 6 1.3 Operating environment. 6 1.4 Reliability. 6 1.5 Quality assuran

21、ce . 6 2 Normative references. 6 3 Description . 7 3.1 Plug 7 3.2 Housings. 7 3.3 Materials. 7 3.4 Dimensions. 7 3.5 Colour and marking 8 4 Variants 8 4.1 Terminated plug . 8 4.2 Housing and adaptor. 9 5 Dimensional requirements 10 5.1 Outline dimensions. 10 5.2 Mating face and other limit dimension

22、s . 13 6 Tests 27 6.1 Sample size. 27 6.2 Test and measurement methods 27 6.3 Test sequence . 27 6.4 Pass/fail criteria 27 7 Test report 27 8 Product qualification requirements . 27 8.1 Dimensional and marking requirements . 27 8.2 Optical performance requirements . 28 8.3 Mechanical performance req

23、uirements. 30 8.4 Environmental performance requirements 32 Annex A (normative) Sample size and product sourcing requirements 34 Annex B (informative) Type MF connector set. 35 Bibliography 36 BS EN 50377-11-1:2008 5 EN 50377-11-1:2008 Figure 1 - Outline dimensions - Plug. 10 Figure 2 - Outline dime

24、nsions - Adaptor. 11 Figure 3 - Plug mating face limit dimensions, variant A1 . 13 Figure 4 - Female plug mating face limit dimensions, variant A2. 15 Figure 5 - Fibre core lateral location. 19 Figure 6 - Alignment pin. 19 Figure 7 - End face parameters related to attenuation and physical contact 20

25、 Figure 8 - Female housing interface, variant B2 . 21 Figure 9 - Male housing interface, variant B3. 23 Figure 10 - Gauge pin dimensions. 25 Figure 11 - Two hole gauge pin 26 Table 1 - Ensured level of random attenuation 6 Table 2 - Preferred colour scheme 8 Table 3 - Plug variants and identificatio

26、ns number. 8 Table 4 - Adaptor variants and identification number. 9 Table 5 - Optical performance requirements. 28 Table 6 - Mechanical performance requirements 30 Table 7 - Environmental performance requirements . 32 BS EN 50377-11-1:2008EN 50377-11-1:2008 6 1 Scope 1.1 Product definition This spe

27、cification contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled singlemode MF 4-fold-connector set (for backplane applications) must meet in order to be categorised as an EN standard product. Since different

28、variants and grades of performance are permitted, product marking details are given in 3.5. 1.2 Intermateability Although all products conforming to the requirements of this standard will intermate, the resulting level of random attenuation performance will only be ensured in accordance with Table 1

29、 The intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades, the resulting level of attenuation can not be assured to be any better than the worst attenuation grade. The intermating of a grad

30、e C plug with a grade B plug will result in an uncertain level of random attenuation performance. Table 1 - Ensured level of random attenuation Plug variant/Attenuation grade C B C C C B C B 1.3 Operating environment The tests selected combined with the severities and durations are derived from the

31、category C environment, according to EN 61753-1. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliabilit

32、y assessment programme. 1.5 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 2 Normative references The following referenced documents are indispensable for

33、the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-

34、mode fibres (IEC 60793-2-50) EN 60794-2-30 Optical fibre cables Part 2-30: Indoor optical fibre cables Family specification for optical fibre ribbon cables (IEC 60794-2-30) EN 61076-4-100 Connectors for electronic equipment Part 4-100: Printed board connectors with assessed quality Detail specificat

35、ion for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100) EN 61300-2-1 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-2 Part 2-2:

36、 Tests Mating durability (IEC 61300-2-2) BS EN 50377-11-1:2008 7 EN 50377-11-1:2008 EN 61300-2-17 Part 2-17: Tests Cold (IEC 61300-2-17) EN 61300-2-18 Part 2-18: Tests Dry heat - High temperature endurance (IEC 61300-2-18) EN 61300-2-19 Part 2-19: Tests Damp heat (steady state) (IEC 61300-2-19) EN 6

37、1300-2-22 Part 2-22: Tests Change of temperature (IEC 61300-2-22) EN 61300-3-28 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measurements Transient loss (IEC 61300-3-28) EN 61300-3-6 Part 3-6: Examinations and measuremen

38、ts Return loss (IEC 61300-3-6) EN 61300-3-30 Part 3-30: Examinations and measurements Polish angle and fibre position on single ferrule multifibre connectors (IEC 61300-3-30) EN 61300-3-34 Part 3-34: Examinations and measurements Attenuation of random mated connectors (IEC 61300-3-34) EN 61753-1 Fib

39、re optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-5 Fibre optic connector interfaces Part 5: Type MT connector family (IEC 61754-5) 3 Description The MF connector is a single position plug connec

40、tor set of plug and socket configuration characterised by a rectangular, spring loaded butting ferrule with up to 12 fibres and a backplane coupling mechanism. The optical alignment mechanism of the connectors is of a precision pin and hole type. 3.1 Plug The plug features a rectangular thermo plast

41、ic composite ferrule and a latched coupling mechanism. A cover (dustcap) to protect the ferrule endface when the connector is in the unmated condition shall be provided. 3.2 Housings The housings B2 and B3 (see Annex B) have no role in the final alignment mechanism. The mounting style is: EN 61076-4

42、100 Back plane MF-A/MF-B See Annex A. Covers (dustcaps) shall be provided to protect each port of the adaptor. 3.3 Materials Materials which are not specified or which are not specifically described are left to the discretion of the manufacturer. The material for the ferrule is Polyphenylene Sulphi

43、de (PPS) material with a Youngs modulus of 20 GPa nominal and guide pins which are of stainless steel. Alternative materials, which have compatible material properties, may be used as long as endface and performance requirements are met under all conditions as specified in this document. 3.4 Dimensi

44、ons Outline dimensions and other dimensions necessary to ensure intermateability or which affect performance are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensions are not in agreement with an IEC interface this is clearly stated. B

45、S EN 50377-11-1:2008EN 50377-11-1:2008 8 3.5 Colour and marking Marking of the product shall be in the following order of precedence: - identification of manufacturer; - manufacturing date code: year/week; - manufacturers part number; - variant identification number. The following colour coding sche

46、me is preferred: Table 2 - Preferred colour scheme Adaptor Delatch housing Blue BluePreferred RAL number 5015. 4 Variants 4.1 Terminated plug The following variants are permitted: Table 3 - Plug variants and identifications number E N 5 0 3 7 7 - 1 1 - 1 - * * - * * * Variant A2 Without pins B1 Back

47、 plane Variant C CableF Ribbon fibre Fibre No. Cable Dimensions Fibre Dimensions mm Structure mm Structure 02 3,5 X 2,5 Reinforced cable 0,70 X 0,41 Ribbon fibre 04 3,5 X 2,5 Reinforced cable 1,20 X 0,41 Ribbon fibre 06 4,0 X 2,5 Reinforced cable 1,70 X 0,41 Ribbon fibre 08 4,5 X 2,5 Reinforced cabl

48、e 2,20 x 0,41 Ribbon fibre 12 5,0 X 2,5 Reinforced cable 3,20 X 0,41 Ribbon fibre BS EN 50377-11-1:2008 9 EN 50377-11-1:2008 4.2 Housing and adaptor The following variants are permitted: Table 4 - Adaptor variants and identification number E N 5 0 3 7 7 - 1 1 - 1 - * * No. Format B3 Sipack fixing ba

49、ck plane B2 Sipack fixing printed board BS EN 50377-11-1:2008EN 50377-11-1:2008 10 5 Dimensional requirements 5.1 Outline dimensions 5.1.1 Plug variants Variant No. A2/A1 Ref. Dimensions Note min. mm max. A B C D E F G - - - 8,48 3,0 - - 30 48 4,5 8,73 4,08 52,6 48,4 Variant A1 Variant No. B1 Ref. Dimensions Note min. mm max. B F C D E - - - - 4,15 24 26 3,45 9,33 4,28 Figure 1 - Outline dimensions - Plug BS EN 50377-11-1:2008 11