EN 50377-6-1-2002 en Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 6-1 Type SC-RJ terminated on IEC 607.pdf

1、BRITISH STANDARD BS EN 50377-6-1:2002 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre The European Standard EN 50377-6-1:2002 has the status of a Br

2、itish Standard ICS 33.180.20 BS EN 50377-6-1:2002 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 20 May 2003 BSI 20 May 2003 ISBN 0 580 41924 X National foreword This British Standard is the official English language version of EN 50377-6-1:

3、2002. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Interconnecting devices and passive components, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to i

4、ts secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electroni

5、c Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to under

6、stand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprise

7、s a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 50377-6-1 NORME EUROPENNE EUROPISCH

8、E NORM September 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and

9、by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-6-1:2002 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b mu

10、ltimode fibre Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produit Partie 6-1: Type SC-RJ cbls sur fibres multimodales de catgorie A1a et A1b de la CEI 60793-2 Steckverbinderstze und Verbindungsbauelemente fr Lich

11、twellenleiter- Datenbertragungssysteme - Produktnormen Teil 6-1: SC-RJ-Abschluss an Mehrmodenfasern des Typs A1a und A1b nach IEC 60793-2 This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

12、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in

13、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotec

14、hnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EN 50377-6-1:2002 - 2 - Foreword This European Standard was p

15、repared by the Technical Committee CENELEC TC 86BXA, Fibre optic connectors. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50377-6-1 on 2002-03-01. The following dates were fixed: - latest date by which the EN has to be implemented at nation

16、al level by publication of an identical national standard or by endorsement (dop) 2003-03-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-03-01 Annexes designated “informative“ are given for information only. In this standard, annexes A and B

17、are informative. _ - 3 - EN 50377-6-1:2002 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 6-1: Type: SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre Description Performance Coupling mechanism: push-pull Co

18、nfiguration: plug / adaptor / plug Fibre Category: IEC 60793-2 type A1a, A1b Cable Type see 3.1 Application: Attenuation Grade: (Random Mate) Return Loss Grade: (Random Mate) For use in Customer Premises IEC Category C Environment M: max. 0,75 dB mean 0,35 dB 0,50 dB for 95 % of measurements M: 20 d

19、B Related documents: EN 50173 Information Technology - Generic cabling systems EN 61300-x-xx Fibre optic interconnection devices and passive components - Basic test and measurement procedures EN 61754-4 Fibre optic connector interfaces - Part 4: Type SC connector family EN 186000-1 Generic specifica

20、tion: Connector sets for optical fibres and cables - Part 1: Requirements, test methods and qualification approval procedures IEC 60793-2 Optical fibres - Part 2: Product specifications IEC 60794-2 Optical fibre cables - Part 2: Product specification (indoor cable) IEC 61753-022-2 Fibre optic interc

21、onnecting devices and passive component performance standard Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment ISO/IEC 11801 Information Technology - Generic cabling for customer premises Outline and maximum dimensions: EN 50377-6-1:2002 - 4 - C

22、ontents 1 Scope5 1.1 Product definition5 1.2 Intermateability5 1.3 Operating environment5 1.4 Reliability.5 1.5 Quality assurance .5 2 Normative references5 3 Description6 3.1 SC-RJ plug.6 3.2 SC-RJ adaptor6 3.3 Materials6 3.4 Dimensions6 3.5 Colour and marking .6 4 Variants.7 4.1 Terminated plug.7

23、4.2 Adaptor7 4.3 Identification of variants 7 5 Dimensional requirements8 5.1 Outline dimensions8 5.1.1 SC-RJ plug8 5.1.2 SC-RJ adaptor.9 5.2 Mating face and other limit dimensions.10 5.2.1 SC-RJ plug10 5.2.2 SC-RJ adaptor.12 5.2.3 Ferrule endface geometry after termination13 5.2.4 Pin gauge for ada

24、ptor14 6 Tests15 6.1 Sample size15 6.2 Test and measurement methods .15 6.3 Test sequence.15 6.4 Pass/fail criteria15 7 Test report.15 8 Performance requirements16 8.1 Dimensional and marking requirements.16 8.2 Optical performance requirements.16 8.3 Mechanical performance requirements 17 8.4 Envir

25、onmental performance requirements .20 Annex A (informative) Attenuation reference plug details.21 Annex B (informative) Sample size and product sourcing requirements .21 Bibliography.21 Figure 1 Outline dimensions SC-RJ plug .8 Figure 2 Outline dimensions SC-RJ adaptor 9 Figure 3 Plug mating face an

26、d other limit dimensions 10 Figure 4 Adaptor mating face and other limit dimensions.11 Figure 5 Ferrule endface geometry After termination 13 Figure 6 Pin gauge for SC-RJ adaptor.14 Table 1 Preferred colour scheme.6 Table 2 Plug fibre / cable variants with fibre category IEC 60793-2 Type A1a .7 Tabl

27、e 3 Plug fibre / cable variants with fibre category IEC 60793-2 Type A1b .7 Table 4 Adaptor variants.7 Table 5 Identification plug fibre / cable variants with fibre category IEC 60793-27 Table 6 Adaptor variants.7 Table 7 Optical performance requirements .16 Table 8 Mechanical performance requiremen

28、ts 17 Table 9 Environmental performance requirements .20 - 5 - EN 50377-6-1:2002 1 Scope 1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled multimode resilient

29、alignment sleeve SC-RJ connector set (plug / adaptor / plug) must meet in order for it to be categorised as an EN standard product. Product marking details are given in 3.5. 1.2 Intermateability Products conforming to the requirements of this specification will intermate and give the specified level

30、 of random attenuation and random return loss performance provided the same fibre type is used. The intention is that this will be true irrespective of the manufacturing source(s) of the product. 1.3 Operating environment The tests selected combined with the severities and durations are representati

31、ve of an indoor environment typically, but not limited to, that found in generic cabling on commercial premises as defined as in ISO/IEC 11801 and EN 50173 and specified as IEC Category C. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years,

32、compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be

33、 maintained using a recognised quality assurance programme. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereaft

34、er. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 50173 Inform

35、ation Technology - Generic cabling systems EN 61300-x-xx Fibre optic interconnection devices and passive components - Basic test and (Series) measurement procedures EN 61300-2-1 Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-2 Part 2-2: Tests - Mating durability EN 61300-2-4 Part 2-4: Tests - F

36、ibre/cable retention EN 61300-2-6 Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-12 Part 2-12: Tests - Impact EN 61300-2-17 Part 2-17: Tests - Cold EN 61300-2-18 Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-19 Part 2-19: Tests - Damp heat (steady state) EN

37、 61300-2-22 Part 2-22: Tests - Change of temperature EN 61300-2-42 Part 2-42: Tests - Static side load for connectors EN 61300-3-6 Part 3-6: Examinations and measurements - Return loss EN 61300-3-23 Part 3-23: Examinations and measurements - Fibre position relative to ferrule endface EN 61300-3-34 P

38、art 3-34: Examinations and measurements - Attenuation of random mated connectors EN 61754-4 Fibre optic connector interfaces - Part 4: Type SC connector family EN 186000-1 Generic specification: Connector sets for optical fibres and cables - Part 1: Requirements, test methods and qualification appro

39、val procedures EN 50377-6-1:2002 - 6 - IEC 60793-2 Optical fibres - Part 2: Product specifications ISO/IEC 11801 Information Technology - Generic cabling for customer premises 3 Description The SC-RJ connector is a duplex plug connector set of plug / adaptor / plug configuration characterised by two

40、 cylindrical, spring loaded butting ferrules of 2,5 mm nominal diameter and a push-pull coupling mechanism. The optical alignment mechanism of the connector is of a resilient sleeve style. 3.1 SC-RJ plug The plug features two cylindrical zirconia ceramic ferrules and a push-pull coupling mechanisms.

41、 Alternative materials that have material properties directly compatible with zirconia may be used for the ferrules, but the endface and performance requirements must be met under all conditions. The plug housing has a single male key which is used to limit the relative rotation between mated plugs.

42、 A cover (dust cap) to protect the ferrule endface when the plug is in the unmated condition is provided. 3.2 SC-RJ adaptor The adaptor consists of two zirconia ceramic resilient alignment sleeves and two push-pull coupling mechanisms, one for each sleeve. Alternative materials that have material pr

43、operties directly compatible with zirconia may be used for the sleeves. The mounting style is a rectangular flange with 2 hole fixing. The adaptor can either connect to a SC-RJ plug or to two simplex SC plugs according to EN 61754-4. The adaptor housing has three female keys which are used to limit

44、the relative rotation between mated plugs. One key is used to position the SC-RJ plug and the other two keys are used to orientate the two simplex SC plugs. Covers (dust caps) are provided to protect each duplex port of the adaptor. 3.3 Materials Materials which are not specified or which are not sp

45、ecifically described are left to the discretion of the manufacturer. 3.4 Dimensions Outline dimensions and other dimensions necessary to ensure intermateability or which affect performance are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit

46、 dimensions are not in agreement with an IEC Interface Standard this is clearly stated. 3.5 Colour and marking Marking of the product shall be in accordance with 2.6.2 of EN 186000-1 in the following order of precedence: a) identification of manufacturer; b) manufacturing date code: year / week; c)

47、manufacturers part number; d) variant identification number. The preferred colour scheme is given in Table 1. Table 1 - Preferred colour scheme Delatch housing SC simplex plug Delatch housing SC-RJ plug Adaptor beige or black beige or black beige or black - 7 - EN 50377-6-1:2002 4 Variants 4.1 Termi

48、nated plug The defined fibre/cable variants are given in Tables 2 and 3. Table 2 - Plug fibre / cable variants with fibre category IEC 60793-2 Type A1a Variant No. Fibre/cable mm Structure Note A01 0,7 - 1,4 buffered fibre 1 fibre A02 1,6 - 2,8 reinforced cable 1 fibre A03 2,7 5,4 reinforced twin zi

49、p cable 2 fibres Table 3 - Plug fibre / cable variants with fibre category IEC 60793-2 Type A1b Variant No. Fibre/cable mm Structure Note B01 0,7 - 1,4 buffered fibre 1 fibre B02 1,6 - 2,8 reinforced cable 1 fibre B03 2,7 5,4 reinforced twin zip cable 2 fibres 4.2 Adaptor The defined adaptor variants are given in Table 4. Table 4 - Adaptor variants Variant number Format C01 rectangular flange duplex 4.3 Identification of varia