EN 50378-3-1-2007 en Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1 Type 100 200 GHz DWDM module terminated on IEC 60793-2.pdf

1、BRITISH STANDARDBS EN 50378-3-1:2007Passive components to be used in optical fibre communication systems Product specifications Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibreThe European Standard EN 50378-3-1:2007 has the status of a Bri

2、tish StandardICS 33.180.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 50378-3-1:2007This British Standard was published under the authorit

3、y of the Standards Policy and Strategy Committee on 28 September 2007 BSI 2007ISBN 978 0 580 57688 1National forewordThis British Standard is the UK implementation of EN 50378-3-1:2007.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee

4、GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applic

5、ation.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 50378-3-1 NORME EUROPENNE EUROPISCHE NORM August 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de

6、Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50378-3-1:2007 E ICS 33.180.20 English

7、 version Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre Composants passifs destins tre utiliss dans les systmes de communication par fibres o

8、ptiques - Spcifications de produit - Partie 3-1: Type: module DWDM 100/200 GHz cbl sur fibre unimodale des catgories B1.1 et B1.3 de la CEI 60793-2-50 Passive Bauteile fr Lichtwellenleiter-Datenbertragungssysteme - Produktnormen - Teil 3-1: Bauart 100/200 GHz-DWDM-Modul zum Anschluss an Einmodenfase

9、rnder Typen B1.1 und B1.3 nach IEC 60793-2-50 This European Standard was approved by CENELEC on 2007-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt

10、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

11、translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estoni

12、a, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 50378-3-1:2007 - 2 - Foreword This European Standard was prepared

13、 by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50378-3-1 on 2007-04-01. The following dates were fixed: - latest date by which the E

14、N has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-04-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-04-01 _ - 3 - EN 50378-3-1:2007 Passive components to be used in optical

15、 fibre communication systems - Product specifications Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre Description Performance Application: For use in controlled environment EN 61753-1 Category C Attenuation Grade Grade S Grade P Mux/Demux

16、: 100 GHz / 200 GHz n x 0,5 + 0,8 dB n x 0,5 + 0,5 dB n = number of channels Isolation Adjacent channels NonAdj. channels Mux : Demux: 100 GHz 200 GHz 100 GHz 200 GHz 10 dB 12 dB 25 dB 30 dB 10 dB 12 dB 30 dB 35 dB Return Loss: Type: 100 / 200 GHz DWDM module Configuration: pigtailed module Fibre Ca

17、tegory: EN 60793-2-50 Type B1.1 and B1.3 Cable Type: 900 m buffered fibre Grade 3 35 dB Related documents: EN 50377 series Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications EN 60794-2 Optical fibre cables - Part 2: Indoor cables - S

18、ectional specification (IEC 60794-2) EN 61300 series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for per

19、formance standard (IEC 61753-1) IEC/PAS 62074-1 Fibre Optic WDM devices - Part 1: Generic specification ETSI ES 201 791 Transmission and Multiplexing (TM) - Dense Wavelength Division Multiplexing devices - Common requirements and conformance testing ETSI EN 300 019-1-4 Environmental Engineering (EE)

20、 - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4: Classification of environmental conditions - Stationary use at non-weatherprotected locations ITU Recommendation G 671 Transmission characteristics of optical components and subsystems EN 50378-3-1:2007

21、- 4 - Outline and maximum dimensions 9,5COMMON90120Up to 8 Outputscommon0.9mm buffered fiber- 5 - EN 50378-3-1:2007 Contents Foreword 2 Contents5 1 Scope .6 1.1 Product definition.6 1.2 Interchangeability.6 1.3 Operating environment 6 1.4 Reliability .6 1.5 Quality assurance .6 2 Normative reference

22、s6 3 Description.7 3.1 General7 3.2 Cable fixing structure.7 3.3 Materials .7 3.4 Dimensions.7 3.5 Marking 7 4 Variants 8 4.1 DWDM module variants8 5 Dimensional requirements.9 6 Tests 9 6.1 Sample definition and size.9 6.2 Test and measurement methods.10 6.3 Test sequence .10 6.4 Pass/fail criteria

23、10 7 Test report10 8 Product qualification requirements .11 8.1 Dimensional requirements .11 8.2 Optical performance requirements 11 8.3 Mechanical performance requirements .14 8.4 Environmental Performance Requirements 15 Figure 1 - Dimensions of a DWDM module.9 Table 1 - DWDM module variants8 Tabl

24、e 2 - Optical performance requirements11 Table 3 - Mechanical performance requirements.14 Table 4 - Environmental performance requirements 15 Annex A (informative) - Sample size and product sourcin,g requirements17 Annex B (informaive) - ITU-grid table 18 Bibliography 19 EN 50378-3-1:2007 - 6 - 1 Sc

25、ope 1.1 Product definition This specification contains the initial, start of life dimensional, optical, mechanical and environmental requirements a unconnectorised or connectorised 100/200 GHz DWDM module has to fulfill in order to be characterised as an EN standard product. Since different variants

26、 are permitted, product-marking details are given in 2.5. The wavelength grid shall be according ITU Recommendation G 671 (see Annex B). 1.2 Interchangeability Environmental performance requirements which DWDM module terminated on single mode fibre B1.1 without connectors shall meet in order to be c

27、ategorised as an EN standard product. The module is to be placed in an enclosure to protect it from accidental pulling forces. All products conforming to the requirements of this specification which meet the transmission and dimensional requirements will be interchangeable. This will be ensured inde

28、pendently of the manufacturing source(s) of the modules. 1.3 Operating environment The tests selected combined with the severities and durations are representative of a controlled environment typically, but not limited to, that defined as in EN 61753-051-3 and IEC Category C. 1.4 Reliability Whilst

29、the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this speci

30、fication does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition

31、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50377 series Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications EN 61300 series Fibre optic interconnecting

32、devices and passive components - Basic test and measurement procedures (IEC 61300 series) EN 61753-051-3 Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment (IEC 61753-

33、051-3) ITU Recommendation G 671 Transmission characteristics of optical components and subsystems - 7 - EN 50378-3-1:2007 3 Description 3.1 General The DWDM module, is a passive component providing a transition between 1 buffered fibre and N individual buffered fibre cables (N = 4,8). The product ma

34、ybe unconnectorised or connectorised. When the product is connectorised the connectors shall be selected from the EN 50377 series. 3.2 Cable fixing structure No cable fixing element is foreseen as the module is terminated on buffered fibres. The module is to be secured against high accidental pullin

35、g forces. 3.3 Materials The material of the module housing shall be left to the discretion of the manufacturer. For plastic materials preferred materials shall have Low Smoke Zero Halogen characteristics. 3.4 Dimensions Outline dimensions and other dimensions necessary to ensure interchangeability o

36、r which affect performance, are specified here. All other dimensions are left to the discretion of the manufacturer. 3.5 Marking Marking of the product shall be in the following order of precedence: a) identification of manufacturer; b) manufacturing date code: year / week; c) manufacturers part num

37、ber; d) variant identification number. EN 50378-3-1:2007 - 8 - 4 Variants 4.1 DWDM module variants The defined DWDM modules variants are given in Table 1. Table 1 - DWDM module variants E N 5 0 3 7 8 - 3 - 1 * * * * * * Variant No. Module configuration A 1-4 channel (Figure 1) B 1-8 channel (Figure

38、2) C 2x (1-4 ) channel (Figure 3) Variant No. Channel spacing 1 200 GHz2 100 GHz Variant No. Mux/Demux M Mutiplexing D DemultiplexingVariant Return Loss Grade 3 35 dB Variant No. Attenuation Grade S StandardP Premium Variant No. Isolation Grade P Premium - 9 - EN 50378-3-1:2007 5 Dimensional require

39、ments Dimensions Ref. min. mm max. Note A B C D E F G 119 111,8 46,8 89 81,8 4,2 3,2 121 112,2 47,2 91 82,2 4,3 3,3 Diameter Diameter Figure 1 - Dimensions of a DWDM module NOTE The module housing is stackable, however the stacked variations fall outside the scope of this document. 6 Tests For the e

40、nvironmental tests on both sides a minimum of 1,5 m of buffered fibre is included in the test chamber. 6.1 Sample definition and size A sample is 1 DWDM housing with 1 common input port and N outputs (see 4.1 for variants). All samples shall be randomly selected. The sample size and product sourcing

41、 requirements are given in Annex A. 120112470.9mm buffered fiber82903,2Up to 8 Outputs4,2(2x)commonCOMMONACD EFGB0.9 mm buffered EN 50378-3-1:2007 - 10 - 6.2 Test and measurement methods All tests and measurements have been selected from EN 61300 series. Unless otherwise stated in the individual tes

42、t details all optical attenuation measurements shall be performed over the related C and L wavelength band. No deviation from the specified test method is allowed. Remark (see Annex B) : The ITU defines the channels in terms of frequency. It is very common to see specifications of wavelengths where

43、the 100 GHz (ITU channel spacing) corresponds to 0,8 nm. This is technically true only at the centre of the C band (1 550 nm). The 200 GHz spacing corresponds to 1,6 nm interval. The spacing values in nm are only given for indication, the normative values are specified in GHz. 6.3 Test sequence All

44、products shall be subjected to Tests 1 to 7 following which there is no defined sequence in which other tests (see Annex A) must be run. 6.4 Pass/fail criteria A product will have met the requirements of this specification provided no failures occur in the sample group for any test. In the event of

45、a failure occurring, the test shall be re-run using a sample size double that of the original. 7 Test report A fully documented test report and supporting data shall be prepared and must be available for inspection as evidence that the tests described in Clause 8 have been carried out in accordance

46、with this specification. - 11 - EN 50378-3-1:2007 8 Product qualification requirements 8.1 Dimensional requirements Dimensions and marking of the product shall be in accordance with the requirements of 3.6 and Clause 5. 8.2 Optical performance requirements Table 2 - Optical performance requirements

47、No. Test Requirement Details Method: EN 61300-3-29 Source stability: 2 m. Only the fundamental mode shall propagate at the DWDM module to be tested and at the detector. 1 Attenuation Grade Grade S Grade P Mux/Demux: 100 GHz / 200 GHz n x 0,5 + 0,8 dB n x 0,5 + 0,5 dB n = number of channels Pre-condi

48、tioning procedure: Method: EN 61300-3-29 Source stability: 2 m. Only the fundamental mode shall propagate at the module to be tested and at the detector. 2 1 dB-bandwidth Centered at the operating wavelength: 0,35 x f where f is the channel spacing 100 GHz: 35 GHz (0,28 m) 200 GHz: 70 GHz (0,56 nm)

49、Condition: the bandwidth shall be determined as the worst case over all states of polarisation Pre-conditioning procedure: EN 50378-3-1:2007 - 12 - Table 2 - Optical performance requirements (continued) No. Test Requirement Details Method: EN 61300-3-29 Peak wavelength: The operating wavelength band. Source stability: 2 m. Only the fundamental mode shall propagate at the DWDM module to be tested and at the detector. Directional coupler: 50/50 Type: Fused. Directivity: 55 dB 3 Return Loss Grade 3 35 dB Pre-conditioning pro